Mould Release Agents

New items

RST250, Electrolube

RST - Resin Stop Resin Stop has been formulated using fluoropolymer technology to provide a film that once applied to the substrate, prevents most epoxy and polyurethane resins adhering.RST is ideally suited for coating machinery, jigs, moulds and many other substrates likely to come into contact with resin such as, aluminium, stainless steel, glass and plastics. once the resin has fully cured it can then simply be peeled off. Provides a non-stick coating Silicone free - non-migrating Dry film – eliminates unwanted transfer Multiple release cycles Reduces the frequency to clean mould tools etc Touch dry 5 minutes Operating Temperature Range: -55°C to +130°C Note This product contains a flammable solvent, do not spray Resin Stop directly onto live equipment and ensure all the solvent has evaporated before turning the power back on.

Product Detail

New items

DAS400, Electrolube

Silicone Mould Release Colourless silicone lubricant Water repellent surface treatment Very good thermal stability Reduces surface friction Weld spatter release Can be used as a polish

Product Detail

New items

32956, CRC

A high purity silicone release agent for moulding of food contact plastic packaging. NSF registered M1 Maximum operational temperature: +200°C Provides good brilliance at transparent plastics Excellent slip for uncomplicated release of light weight mouldings

Product Detail

New items

31550-AB, Ambersil

Mould Cleaner Powerful solvent blend formulated to remove a wide range of soiling from mould tools, extrusion dies and other metal surfaces. Quickly and easily removes oil, grease, old protective films, silicone and non-silicone based mould release agents Contolled evaporation permits use on hot production tooling without excessive solvent loss Leaves surfaces clean and dry

Product Detail

New items

31537-AB, Ambersil

PUR 400 Silicone Release Agent for PU A modified silicone resin release system. Formulated to provide quick and effective release of rigid, integral skin and elastomeric polyurethanes Also provides effective release of epoxy, polyester, PVC and many other plastics and rubbers Does not build up in the mould and provides a high gloss finish to moulded parts Operational up to 200°C

Product Detail

New items

RS_200-9504, Rocol

PR Spray Wet film silicone release agent designed to improve surface finish by preventing adhesion of plastic or rubber to moulding dies Assists release with complex dies and the production of delicate or intricate plastic components Ultra fine spray for complete coverage and high gloss finish

Product Detail

New items

32977, CRC

Non-silicone release agent formulated to release a wide variety of thermosets in high temperature transformation. Forms a thin, homogeneous, inert and thermally stable coating from which multiple releases can be expected. Fast cure time. Moulding can commence ± 30 minutes after application. Operational temperature to +250°C. Features Can be used on all mould types. Provides multiple releases per application. Easy application. Low odour. Application Outstanding release capacity for all types epoxy, phenolic, polyester or vinyl ester from steel, aluminium or composite mould. Directions In case other products have been used before, clean the surface to be treated. Shake the Aerosol during 2 min. Stir the bulk product firmly. Apply a uniform film. Repeat after 15 minutes until the complete mould surface is covered. Allow curing for 30 minutes. Re-apply as soon as the release shows to become more difficult.

Product Detail

New items

72021, Rocol

MRS silicone-free mould release Dry, silicone-free mould release for quick and clean unmoulding. Specially designed for delicate applications. Excellent adherence and distribution. Does not attack the mould or the part surface. Resistant to water, vapours et most chemicals. Temperature resistance: 270 °C Base: PTFE Packaging: 400 ml aerosol

Product Detail

New Items

RST250, Electrolube

DAS400, Electrolube

32956, CRC

31550-AB, Ambersil

31537-AB, Ambersil

RS_200-9504, Rocol

32977, CRC

72021, Rocol

FAQs