Smoke Alarms

New items

FXN922, Eaton Fulleon

The Fulleon conventional range offers a multi-mode, 5 in 1 detector (FXN922), covering many building needs. It is quick and simple to install with a stylish low profile design. The detector is mounted on our standard conventional base (EFXN520). Each detector is fitted with a 360˚ viewable LED for indication. This multi-mode detector can be configured to operate as either an optical detector, photo-thermal detector or 1 of 3 heat detector modes (rate of rise and 2 fixed heat models) using the four position switches located at the back of the detector. Operating voltage 15V dc to 30V dc Standby current 30μA (max) Operating temperature -20ºC to 75ºC (dependent on setting) Construction PC/ABS Color White

Product Detail

New items

5TC1296, Siemens

Smoke Detector DELTA reflex SD230N 230 V operated smoke detector included 9 V alkaline backup battery with VdS certification (suitable for networking) The smoke detector detects smoke from fires and gives early warning As well as using the smoke detector on its own, it is also possible to network smoke detectors of the same type Battery change display for 30 days Battery compartment check Test button for function test With acoustic signal transducer > 85 dB(A) and optical red LED indicator Titanium white (similar to RAL 9010) DELTA reflex smoke detectors are quick and easy to mount on the ceiling. They feature a modern design in extremely UV-resistant material. Approvals VdS certification according to EN 14604, 10/05

Product Detail

New items

EFBWOPTDET, Eaton Fulleon

The Fulleon The BiWire 5 in 1 detector provides a complete detector solution for use with Eaton two-wire BiWire flexi fire and notification fire alarm system. It is configurable to one of five settings including three heat detector modes, a setting that helps to prevent false alarms in areas with known high levels of dust, fumes, steam or smoke. Operating voltage 15 to 35 V DC Standby current (max) 80μA Alarm current (typ) 20mA Material PC/ABS

Product Detail

New items

RM1100, ABUS

Smoke Alarm Opti Smoke optical smoke sensor (RM1000) For detecting visible smoke particles Integrated infrared light source generates a light pulse every 8 seconds Visible smoke particles alter the signal received by a photo-diode and the sensor triggers an alarm Self-adjusting sensitivity Floating alarm relay Direct connection to each alarm control unit Recording range 40 m 2 Mounted to ceiling in centre of room Opti Heat thermo-differential sensor (RM1100) Thermo-differential fire detector (heat detector) Two-way detection (thermo-differential/absolute) Floating alarm relay Direct connection to every alarm control unit For avoiding false alarms in smoking areas, kitchens, garages etc. It detects an alarm if the temperature rises by more than 3°C within 1 minute or to over 60°C overall in a detection range of 40 m 2 Mounted to ceiling in centre of room Type: RM1000 RM1100 Operating voltage: 12 Vdc 10-15 Vdc Power consumption: (on alarm) 1 mA (50 mA) 2 mA (50 mA) Alarm memory: Yes Yes Connection: 4-core 4-core Output: Floating changeover contact 28 V / 1 A Floating changeover contact 28 V / 1 A Material: Polycarbonate Polycarbonate Colour: White White Selection guide Stock no. Manuf. designation Manuf.no. 524-5898 Opti Smoke RM1000 524-5961 Opti Heat RM1100 Standards EN54

Product Detail

New items

FHB10, FireHawk Safety Products

Firehawk FHB10 Series Battery Operated Smoke Alarms Firehawk FHB10 series battery operated smoke alarms are optical smoke alarms. The high performing alarm is used and recommended by UK Fire and Rescue Services. The alarms have TSE technology, bespoke software and an X-Profile photoelectric chamber. Thermal stability enhancement TSE is designed to reduce noise nuisance alarms still maximising the detection of smoke and fire. In addition, the alarm features a silence button, audible low battery warning plus, an end of alarm life indicator. When the alarm is installed, it automatically switches on plus also switches off when removed from the mounting plate. FEATURES and BENEFITS: Battery powered – Sealed in 10-year battery Auto-switching mounting base plate High performing TSE technology – Thermal Stability Enhancement Bespoke software Maximum detection of smoke and fire Reduced nuisance alarm Silence buttons Audible low battery warning Alarm life indicator Recommended by the UK Fire and Rescue Services Note USED AND RECOMMENDED BY THE UK FIRE AND RESCUE SERVICES Approvals LPCB Apporoved Standards EN 14604:2005 Stand Alone Fire Alarms Battery Operated A comprehensive range of battery operated smoke alarms all carrying the BS Kitemark and compliance with BS5446:Pt1:1990. They are suitable for BS5839:Pt6:1995 Fire Systems grade F. Mains Powered Interconnectable All new properties are required by the Building Regulations to have installed mains powered smoke alarms. Refurbished properties and small commercial premises may also be required to install mains operated alarms. BS5839:Pt.6:1995 acknowledges that all three types of detection i.e. ionisation, optical and heat detection, need to be considered depending on the installation circumstances. It is also recommended that some form of back-up is used in t...

Product Detail

New items

EFXN524, Eaton

The Fulleon Conventional detectors have been specifically designed to operate with JSB control panels. The JSB optical detector FXN533 is suitable for most applications giving the fastest response to slow burning or smoldering fires which give rise to large visible smoke particles. The JSB photo-thermal detector FXN632 will respond quickly to fast clean burning fires yet maintain the advantage of optical detectors when detecting smoldering fires. The thermal enhancement of this detector allows a higher alarm threshold which provides a greater rejection of false alarms. The detector will also raise an alarm at temperatures exceeding 60ºC. Quick and simple to install Stylish low profile design Removable detector chamber Drift compensation

Product Detail

New items

EFXN526, Eaton Fulleon

The Fulleon Heat detector is a comprehensive range of conventional detectors that are compatible with cooper, menvier and JSB conventional control panels. Low profile design Removable detector chamber for cleaning Common mounting base

Product Detail

New items

FHB155 Midi, FireHawk Safety Products

Firehawk FH Midi Series Battery Operated Smoke Alarms Firehawk FH Midi series battery operated smoke alarms are compact optical smoke alarms giving you a choice of power sources. A high performing alarm with a stylish design containing TSE technology, bespoke software and up-to-date technology. Thermal stability enhancement TSE is designed to reduce noise nuisance alarms still maximising the detection of smoke and fire. In addition to the small compact design the alarm features a large test and silence button, audible low battery warning plus, an end of alarm life indicator. FEATURES and BENEFITS: Compact design Power source choice Battery powered High performing TSE technology – Thermal Stability Enhancement Bespoke software Maximum detection of smoke and fire Reduced nuisance alarm Large test and silence buttons Audible low battery warning Alarm life indicator Stylish Small Unobtrusive BATTERIES: Stock number 123-5774. Part number FH150 Midi. 1-year replaceable battery Stock number 123-5775. Part number FH155 Midi. 5-years replaceable battery

Product Detail

New items

Ei208, Aico

The Aico carbon monoxide alarm is a standalone battery unit, powered by 10 year life sealed in lithium cell. The battery can not be removed ensuring continued protection. Easy to fit twist on base and multi-fixings Proven electrochemical sensor Pre-alarm LED indication give early warning of CO

Product Detail

New items

Ei3016, Aico

The Aico optical smoke alarm contains tried and tested high performance optical smoke sensor, which is best for detecting slow, smoldering fires. In addition, the smoke chamber design, integrated insect screen and unique automatic dust compensation reduce the risk of false alarms. Contains a high performance optical sensor Mains powered with 10 year rechargeable lithium cell back-up Add an Ei3000MRF module for wireless interconnection and data extraction AudioLINK data extraction technology Compatible with other Aico mains powered devices Easi-fit base

Product Detail

New items

FXN922, Eaton

The Fulleon conventional range offers a multi-mode, 5 in 1 detector (FXN922), covering many building needs. It is quick and simple to install with a stylish low profile design. The detector is mounted on our standard conventional base (EFXN520). Each detector is fitted with a 360˚ viewable LED for indication. This multi-mode detector can be configured to operate as either an optical detector, photo-thermal detector or 1 of 3 heat detector modes (rate of rise and 2 fixed heat models) using the four position switches located at the back of the detector. Operating voltage 15V dc to 30V dc Standby current 30μA (max) Operating temperature -20ºC to 75ºC (dependent on setting) Construction PC/ABS Color White

Product Detail

New items

EFXN525, Eaton Fulleon

The Fulleon Heat Detector for use with JSB EFX2200 series fire panels. Rate of rise detectors are triggered either by a sudden rise in temperature of if the temperature rises to a fixed upper limit even if the rate of increase has been slow. These kinds of detectors are most suitable for areas where the temperature is normally stable and a fast reaction to sudden temperature change is required. NB the detector requires a separate mounting base which must be ordered separately. Low profile design Locking facility 360O viewing angle LED

Product Detail

Purpose of Smoke Alarms

Benefits of Smoke Alarms

New Items

FXN922, Eaton Fulleon

5TC1296, Siemens

EFBWOPTDET, Eaton Fulleon

RM1100, ABUS

FHB10, FireHawk Safety Products

EFXN524, Eaton

EFXN526, Eaton Fulleon

FHB155 Midi, FireHawk Safety Products

Ei208, Aico

Ei3016, Aico

FXN922, Eaton

EFXN525, Eaton Fulleon

FAQs