Rope Pull Switches

New items

6011629068, Bernstein AG

Cable Pull System SR-U2Z 300 / 175 / 100 Maximum system length: 75 m Switch function: 2 NC + 2 NO (standard) Built-in reset button Cable pull eyelet, low cost Visualisation of correct cable tension Meets EN418 and IEC947-5-5 Protection class IP67 Safety cable pull switch, plastic housing SR-U2Z 300 / 175 / 100 Manuf. Part no. Bracing length Tensile force 601.1620.020 37.5 → 75 m 300 N 601.1621.026 25 → 37.5 m 175 N 601.1621.030 → 25 m 100 N Voltage max.: 250 Vac Max. thermal continuous current: 10 A Switching frequency max.: 20/min Mechanical lifespan: Complies with IEC 60974-5-5 Ambient temperature: -25 °C → +70 °C Standards EN418; IEC947-5-5

Product Detail

New items

143052, IDEM

IDEM Guardian Line GLM Mini Safety Rope Pull Switches The Guardian Line GLM from IDEM are safety rope pull switches with a compact yet robust yellow diecast housing that protect short conveyor lengths of upto 50m and offer a choice of fittings depending on the application. They are designed to be mounted on machines and sections of conveyors which cannot be protected by guards and unlike emergency stop pushbuttons can be activated from any point along the length of rope pull to provide robust emergency stop protection. In combination with a dual channel safety monitoring relay these safety rope switches can be used as emergency stop devices and monitored for up to Category 4 to EN 954-1 or PLe ISO 13849-1. The Guardian Line conforms to ISO 13850 and IEC 60947-5-5 and has a positive mechanical linkage between the switch contacts and the wire rope, as well as wire breakage monitoring. Once the rope is pulled, anywhere along its length, the safety contacts are positively opened and the auxiliary contacts are closed. The switches are mechanically latched and can only be returned to the operational condition by pressing the blue reset button, as required by ISO 13950. Switch mechanism will latch the instant the safety contacts open, ISO13850 standard Upto 30m can be covered using a single switch Upto 50m can be covered using two switches Positive break contacts to IEC60947-5-1 Robust yellow diecast housing IP67 protection Rugged integral sealing bellows mean they can be high pressure hosed All internal screws are stainless steel Easy to wire with 3 x M20 conduit entries 4 pole, either 3NC / 1NO or 2NC / 2NO Note 826-4101 & 826-4104 have an E-stop and LED. Approvals CE, cULus, TUV. Standards IEC 60947-5-1, IEC 60947-5-5, EN 954-1, EN 62061, UL 508, ISO 13850, ISO 13849-1.

Product Detail

New items

ZBRP1, Schneider Electric

Wireless XB5R Component Transmitters XB5R series push buttons transmitters. Mounting Diameter: 22 mm Mechanical Life: 1000000 cycles Approvals CE, C-Tick, FCC, GOST, ANATEL, SRRC, BT 2006/95/EC, EMC directive 2004/108/EC, R&TTE directive 1999/5/EC, RSS Standards CSA C22-2 No 14, EN/IEC 60947-5-1, UL 508, EN 300-440-1, EN 300-440-2, EN 301-489-1, EN 301-489-3 Schneider Wireless & Batteryless The Harmony XB5R wireless, batteryless push buttons are easy to install in both new and existing applications, it is now no longer needed to pass a cable through the machine structure or cable tray to connect the push button to the electrical panel. Mechanical energy is transformed into electrical energy, when the operator pushes the button, which sends a one-time radio message to one or multiple receivers. These Harmony wireless, batteryless push buttons are well suited for harsh industrial environments. Reduction of wiring Quick and easy installation Eliminates wires and cables Flexible due to its mobility Greater control and mobility for operators - can be used to remotely control machines up to 25 m away Maintenance-free Up to 32 push buttons can be synched to a receiver Benefits the environment as no need for battery maintenance, recharging and recycling

Product Detail

New items

XY2CJS15H29, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Approvals CE, UL, cULus, NiDS, CCC. Standards IEC 60947-5-5.

Product Detail

New items

XY2CJS15, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Approvals CE, UL, cULus, NiDS, CCC. Standards IEC 60947-5-5.

Product Detail

New items

XY2CJS19H29, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Approvals CE, UL, cULus, NiDS, CCC. Standards IEC 60947-5-5.

Product Detail

New items

XY2CJL19, Telemecanique Sensors

Telemecanique XY2CJ Emergency Stop Rope Pull Switches The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available. They are easy to install and offer a quick visual check of the switch status for machine restart. Typical applications include woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops and surface treatment works. Certified by UL with NiSD to the IEC 60947-5-5 and UL NiSD item category Embedded safety spring ensures function is maintained in the event of spring damage Fast mounting and wire adjustment with tensioner accessory Colour coded sections (green and yellow) on the pull reset button offer an easy visual check of the switch status for a quick machine restart Up to 20m cable length for the XY2CJS and up to 30m cable length for the XY2CJL & XY2CJR Four position turret head rotatable by 90° turns Various electrical connections options available IP66 / IP67 protection Approvals CE, UL, cULus, NiDS, CCC. Standards IEC 60947-5-5.

Product Detail

New items

440E-L13042, Allen Bradley Guardmaster

Lifeline 4 Rope Pull Switch The Lifeline 4 rope pull switch, also known as a cable pull switch or grab wire switch, can be installed along or around awkward machinery such as conveyors and provides constant emergency stop access. The positive mode mechanism helps ensure that the contacts are immediately latched open on actuation and can only be reset by the intentional action of turning the blue reset knob. The design of this safety switch also protects against nuisance tripping and the effects of thermal expansion. A mushroom head emergency stop button is included on the Lifeline 4 to provide E-Stop access even at the extreme ends of the span. The cable status indicator makes this rope pull switch easy to set up and maintain for spans up to 125m. Switches up to 125m spanUniversal mounting and operationLid mounted emergency stop button, designed to conform to ISO 850Switch lockout on cable pulled and cable slackCable status indicator on switch lidSealed to IP66Tension force 188 N lock-out, 103 N runningOperating Force Operating temperature -25C to +80CSafety contact gap >2 x 2mmRated at 500V ac/1A, 250V ac/2A, 100V ac 5AHeavy duty weatherproof die-cast aluminium alloy (LM24) yellow caseStainless steel eye nut, glass filled nylon indicatorCE marked in compliance to relevant European DirectivesNote For suitable rope kits see stock no.366-3878 typically.Approvals BG, UL listed for Canada and US.Standards Designed to conform to EN418, EN292, EN60947-5-1, ISO 13850, BS 5304.

Product Detail

New items

440E-H13046, Allen Bradley Guardmaster

Lifeline 4, Hazardous Area Designed to meet the latest standard for emergency stop equipment, EN418 and is suitable for Zone 1 & 2 environmentsCan be installed along or around awkward machinery such as conveyors and provides a constant access emergency stop facilityStatus indicator makes the system easy to set-up and maintain for spans up to 75 metresThe positive mode mechanism ensures that the contacts are immediately latched open on actuation and can only be reset by the intentional action of turning the blue reset knobThe design also protects against nuisance tripping and the effects of thermal expansionA mushroom head emergency stop button is included on the unit to provide total E-stop access even at the extreme ends of the span and is sealed to IP66Rugged construction using die cast alloy and stainless steel to withstand harsh conditions2 of the 3 cable access points are sealed to meet Ex. specCable access is therefore restricted to one point of ingress, underside entryApproval Certificate available on requestNote Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.Stock No typ.366-3878 &239-6757

Product Detail

New items

6011621065, Bernstein AG

Cable Pull System SR-U2Z 300 / 175 / 100 Maximum system length: 75 m Switch function: 2 NC + 2 NO (standard) Built-in reset button Cable pull eyelet, low cost Visualisation of correct cable tension Meets EN418 and IEC947-5-5 Protection class IP67 Safety cable pull switch, plastic housing SR-U2Z 300 / 175 / 100 Manuf. Part no. Bracing length Tensile force 601.1620.020 37.5 → 75 m 300 N 601.1621.026 25 → 37.5 m 175 N 601.1621.030 → 25 m 100 N Voltage max.: 250 Vac Max. thermal continuous current: 10 A Switching frequency max.: 20/min Mechanical lifespan: Complies with IEC 60974-5-5 Ambient temperature: -25 °C → +70 °C Standards EN418; IEC947-5-5

Product Detail

New items

3SE7150-1BD00, Siemens

3SE7 Emergency Grab Wire Switch The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections. As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems. Design The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ´ 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts. The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m. Function The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position. Positive latching and positive NC contacts Switches for wire lengths up to 75m Metal housing Enclosure is screw mounted IP65 rating Operating temperature: -25 to +70°C Note Stock nos. 764-4341 , 764-4301 , 764-4304 , 764-4357 are fitted with an indicator lig...

Product Detail

New items

XY2CE2A250, Telemecanique Sensors

Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking. Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended) The XY2 CE1A296 comes with a pilot light (direct supply) Note The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°. Standards EN/ISO 13850:2006

Product Detail

New Items

6011629068, Bernstein AG

143052, IDEM

ZBRP1, Schneider Electric

XY2CJS15H29, Telemecanique Sensors

XY2CJS15, Telemecanique Sensors

XY2CJS19H29, Telemecanique Sensors

XY2CJL19, Telemecanique Sensors

440E-L13042, Allen Bradley Guardmaster

440E-H13046, Allen Bradley Guardmaster

6011621065, Bernstein AG

3SE7150-1BD00, Siemens

XY2CE2A250, Telemecanique Sensors

FAQs