Series CA10
Each switch body is supplied with the appropriate legend plate but the switch operator must be ordered separately (see stock no. 350-0840 typically)
Rated at 20A
S0 size (48x48mm)
Technical Specification
Series
CA10
CA20
CA25
CAD11
CHR10
CG8
Insulation Voltage U,
690V
690V
690V
600
690
690
Thermal Current l
th
20A
25A
32A
6A
20A
20A
Motor Rating AC-23A
7.5kW
11kW
15kW
-
7.5kW
7.5kW
Motor Rating AC-3
5.5kW
7.5kW
11kW
-
5.5kW
5.5kW
Switching Angle
60°
Dims. (mm)
48 x 48mm
Ambient temp. of stages
55°C during 24 hours with peaks up to 60°C at 100% load
Protection
IP20
Legend Plate
Silver with black text
Standards
IEC
947, EN 60947
CA10, CA20, CA25 & CAD11 Series
Open finger proof terminals accessible from the side to facilitate wiring. Captive plus-minus screws
CHR10 Series
For connection with ring type terminals. Open finger-proof terminals accessible while switch is being installed. Captive plus-minus screws located 90° apart from the terminal direction allowing for connection of wires without any interference with the terminal screws.
CG8 Series
Open finger-proof terminals accessible while the switch is installed. Captive plus-minus screws. Due to the arrangement of the terminals it is possible to install switches closely, side by side or to mount them directly at the cable trays
