Oscilloscope Battery Packs | Chargers

New items

PM8907/830, Fluke

The PM8907/830 is a universal mains-power adapter (the Adapter or Product) for measurement, control, and laboratory equipment. The Adapter is intended to operate and charge the 120-Series ScopeMeter Test Tool, 43B Power Quality Analyzer, and other products that require the PM8907 mains adapter. The Adapter is based on the switched-mode concept for high efficiency and low stand-by power consumption. It operates in a wide range of input voltages from 100 Vac up to 240 Vac nominal. A universal set of mains cords is included to make the Adapter suitable for most types of mains outlet.

Product Detail

New items

BP190, Fluke

ScopeMeter 190 Series Accessories Note For Oscilloscope 190 204 series Carrying Case kit see RS stock 716-7416 manufacturers part number SCC290 This product has a non UK main plug please refer to RS Stock no. 480-4143 (replacement battery charger)

Product Detail

New items

PS008, Pico Technology

Pico 9 V AC Power Adapter PS008 Pico PS008 is an AC power adapter for use with a selection of active differential probes. Input voltage range 90 to 264 V AC 50/60 Hz Input current 300 mA RMS maximum Output voltage 9 V DC Current maximum 0.67 A Power rating 6 W Ripple and noise 150 mV p-p maximum Line regulation ±3 % 1.83 m DC lead Approvals UL/CUL, GS

Product Detail

New items

TEKBAT-01, Tektronix

The Tektronix additional battery is used for battery pack 2-BP/2-BATPK. Li-Ion rechargeable battery

Product Detail

New items

TPSBAT, Tektronix

TPS2000 Accessories Accessories available for Tektronix TPS2000 Series digital storage oscilloscopes include: passive probes P2220 ( 481-0823 ) & P5122 ( 712-1141 ); current probes A621 ( 851-218 ) & A622 ( 851-224 ); power measurement and analysis bundle TPS2PBND2 ( 712-1145 ); battery TPSBAT ( 481-0867 ) & battery charger TPSCHG ( 481-1290 ); soft carrying case AC2100 ( 481-0845 ) & hard carrying case HCTEK4321 ( 613-1510 ).

Product Detail

New items

2-BP, Tektronix

The Tektronix battery pack has 2 battery slots and 1 battery. For use with 2 Series MSO

Product Detail

New items

TEKCHG-01, Tektronix

The Tektronix standalone battery charger used for charging TEKBAT-01 battery. For charging up to two TEKBAT-01 batteries

Product Detail

New items

BP291, Fluke

ScopeMeter 190 Series II Accessories See Industrial ScopeMeter 190 Series II, e.g. RS 716-7387 & 716-7396 Suitable cables for the Oscilloscope Probe Software ( RS 716-7434 ) can be found at RS 493-5540 & 205-738

Product Detail

New items

TPSCHG, Tektronix

Accessories for Tektronix TPS2000 Series TPS2PBND: Service package for series TPS2000 oscilloscopes (contains 4 passive P5120 high voltage probes and TPS2PWR1 software) TPS2PWR1: Application package for performance analysis. Instant analysis of power signal, signal analysis, harmonic analysis, transient power loss, phase angle, dV / dt and dl / dt cursor TPSBAT: Extra battery TPSCHG: Battery charger AC2100: Carry case HCTEK321: Hard shell case Probes P2220: Passive switch probe (1 x / 10 x) 200 MHz P5120: Passive high voltage probe (1000 V CAT II tip to grounding; 600 V CAT II reference to grounding) A622: DC / AC current lamp (BNC) 100 A, 100 kHz

Product Detail

Oscilloscope Battery Packs & Chargers

New Items

PM8907/830, Fluke

BP190, Fluke

PS008, Pico Technology

TEKBAT-01, Tektronix

TPSBAT, Tektronix

2-BP, Tektronix

TEKCHG-01, Tektronix

BP291, Fluke

TPSCHG, Tektronix

FAQs