Thermometer Accessories

New items

830-001, Instruments Direct

Superfast Thermapen Pocket Thermometer Rapid temperature measurement in under four seconds Washable casing with Biomaster" additives to reduce bacteria growth 14.3mm high digital display Water resistant case Battery life 1500 hours typical Dimensions & weight 19 x 47 x153mm; 97g Sensor type K thermocouple Temperature Measurement range -49.9 → +299.9 °C Accuracy ±0.4 °C(-49.9 → +199.9 °C) ±1°C (elsewhere) Resolution 0,1°C /1°C (selectable) Probe length & diameter 113 mm, Ø 3.3 mm Note For carry pouch see stock no. 700-6421 Supplied with 2 x 3V CR2032 Lithium button cell batteries Handheld Pocket Temperature Indicators

Product Detail

New items

0554 0051, Testo

Emmissivity Adhesive Tape Testo 0554 0051 is an adhesive tape roll for Infrared Thermal Imagers and Thermometers. Suitable for use on bare surfaces. Feature and Benefits Emission tape, for measurements on reflective surfaces Measures 10 m (L) x 25 mm (W) 0.95 Emissivity Temperature Resistant to +250°C Testo 0554 0051 Adhesive Tape Roll Attach a piece of emission tape to your measurement object. With your thermal imager or your infrared thermometer, you can measure the temperature of the measurement object's surface on the taped area. Thermal cameras

Product Detail

New items

802-G1/2-100, Electrotherm

Applications This sensor can be used in connection to the DTM 4000(multisensor), but can also be connected directly to Raspberry and others.It is possible to save datas of calibration, date of manufacture and serial number on the integrated memory The sensor is constructed in a stainless steel case with slashed protective tube ø 6 mm and thread

Product Detail

New items

K0234.IS/SDI/1M, Digitron

The Digitron Probes are tough in construction which makes them most sought after solution in hazardous atmospheres for measuring temperature. Certified for use in flammable or explosive atmospheres

Product Detail

New items

0516 0222, Testo

testo measuring instrument accessories Selection guide Testo No.: Description Suitable for testo: 0516 0210 Carry Case for Measuring Instrument and Sensors 110, 112, 416, 417, 425, 512, 625, 720, 720 Ex*, 922, 925, 926 (* not suitable for potentially explosive surroundings) 0516 0200 Transport Case for Measuring Instrument, 3 Sensors and Accessories 110; 112; 720; 922; 925; 926 0516 0435 Service case for measuring instrument, probe and accessories (520 x 380 x 120 mm) 435; 635 0516 0220 TopSafe, to protect against impact and dirt 112; 926 0516 0221 TopSafe, to protect against impact and dirt 110; 416; 425; 512; 625; 720; 925 0516 0222 TopSafe, to protect against impact and dirt 922 0515 0025 9 V Battery for Measuring Instrument 110; 112; 416; 417; 425; 512; 625; 720; 922; 925; 926 0554 0025 Charger for 9 V Battery (0515 0025) for External Charging 110; 112; 416; 417; 425; 512; 625; 720; 922; 925; 926 0554 0547 Printer with Wireless IRDA and Infrared Interface, 1 Roll Thermopaper, 4 AA Batteries 435; 635; 735; 110; 112; 512; 922; 925; 720; 926; 523 0554 0569 Spare Thermopaper for Printer (6 Rolls) Logger 0554 0547 0554 0410 testovent 410, Volume Flow Funnel, ø 340 mm, incl.Pouch 435 0554 0638 Calibration Control Set 435; 625; 635

Product Detail

New items

TA13, FLIR

PROTECTIVE CASE FOR TG165

Product Detail

New items

47/432/0, Brannan

Glass Thermometers Glass thermometers are economical, accurate, and simple to use instruments that measure the temperature of many fluids. The Brannan range incorporates the following features. Toughened stirring bulbs Duramark permanent markings Vertical figuring Non-roll fitting and ring tops Mercury and red spirit fillings Safe-seal packs, to reduce breakages and spillage risk, thus giving improved handling Accurate to ±1 division

Product Detail

New items

0602 2693, Testo

testo Thermocouple Probes Thermocouple probes compatible with the testo 922 & 925 thermometers and 435 air quality meters 1.2m cable and Type K mini plug connector Testo Ref. Description Range (Measurement temperature) Accuracy Probe Length Probe Diameter Response Time Stock no. 0602 0393 Surface probe with sprung thermocouple strip -60 → +300 °C ± 2.5°C (Class 2) 115mm Ø5mm shaft, tip Ø12mm sensor head 3s 516-0618 0602 0593 Immersion probe, waterproof, Type K -60 → +1000 °C ± 1.5°C (Class 1) 300mm Ø1.5mm 2s 512-0733 0602 1793 Air probe -60 → +400 °C ± 2.5°C (Class 2) 115mm Ø4mm 25s 512-0519 0602 2693 Immersion/penetration probe, waterproof, Type K -60 → +800 °C ± 1.5°C (Class 1) 60mm Ø5mm (14mm tip Ø1.5mm) 3s 512-0682 0602 4692 Pipe clamp, 15mm to 25mm, Type K -50 → +100 °C ± 2.5°C (Class 2) Ø4mm 5s 518-5285 Sorry Your request could not be completed at this time

Product Detail

New items

RS_310-7687, Digitron

Accessories for Digitron 2046T

Product Detail

New items

RS_311-0532, Digitron

Accessories for Digitron 2046T

Product Detail

New items

PX22L, Comark

PX22L Food Penetration Probe - Thermistor Lumberg connector White End Cap 0.7m FEP straight lead Compatible with Comark C20 and CF21 thermometers Insertion/Contact

Product Detail

New items

T0423LS, Digitron

The Digitron Probes are tough in construction which makes them most sought after solution in hazardous atmospheres for measuring temperature. Certified for use in flammable or explosive atmospheres

Product Detail

New Items

830-001, Instruments Direct

0554 0051, Testo

802-G1/2-100, Electrotherm

K0234.IS/SDI/1M, Digitron

0516 0222, Testo

TA13, FLIR

47/432/0, Brannan

0602 2693, Testo

RS_310-7687, Digitron

RS_311-0532, Digitron

PX22L, Comark

T0423LS, Digitron

FAQs