Test Probes

New items

975017700, Hirschmann Test & Measurement

PRUEF 1600 Needle Point Safety Test Probes with 2mm Rear Socket Hirschmann Test and Measurement CAT III 2mm safety range needle point stainless steel test probes with shatter proof insulated sleeve and a rear 2mm socket that is stackable with test lead MVL S WS. Insulation and oxide layers can be penetrated by the needle point of these 2mm safety series test probes, offered in black and red colours. CAT III Unsprung tip and unsprung 2mm socket Rated at 1000 VAC/DC Current rating 10A 1.4mm pin

Product Detail

New items

AC288, Fluke

Fluke AC288 SureGrip™ Terminal Block Probe The Fluke AC288 Terminal Block Probe features a retractable probe tip that provides safe and secure connections to clamp and screw type terminal blocks. Retractable probe tip designed for increased safety, while providing flexibility to reach deep connection points 11.5 cm insulated, flexible shaft 1 mm diameter probe tip extends out to 8.4 mm length Retractable probe tip is made with stainless steel Recommended for use with TL224, TL222 or TL221 test leads Standards IEC 61010-031 Ed.1.12008, CAT III 1000 V CAT IV 600 V

Product Detail

New items

TP220-1, Fluke

Fluke Multimeter Test Leads and Probes Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories. TP220-1 Industrial Probe Set Standards CAT II 1000V

Product Detail

New items

6411, Pomona

Visunet Active foam for cleaning screens, keyboards and casings of all IT equipment. This product is anti-static and biodegradable. Sticks to all surfaces - even vertical. Not for use on liquid crystal displays. Non-flammable product Density at +20 °C: 1 g / cm 3 pH 9.5 → 10 Packaging: aerosol 650 ml gross - 500 ml net Minimum aerosol life: 5 years

Product Detail

New items

TL221, Fluke

Fluke Multimeter Test Leads and Probes Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories. TL221 SureGrip Extension Lead Set Includes 1 pair (red, black) of silicone insulated leads with straight connectors on both ends. Includes 1 pair (red, black) female couplers. Meets CAT IV 600 V, CAT III 1000 V, 10 A rating, UL listed. Standards 1000 V CAT III, 600 V CAT IV

Product Detail

New items

TP1-1, Fluke

Fluke Multimeter Test Leads and Probes Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories. TP1 Slim Reach Test Probe (Flat Blade) One pair (red, black) slender probes. Standards CATII 1000V

Product Detail

New items

SPS 8034 Ni / RT, Schutzinger

Universally Suitable Because Various Contact Tips Can Be Interchanged in the Probe Holder for a Wide Variety Of Measuring Functions. Version with Spring-Loaded Steel Probe for Pin-Point Measuring On Printed Boards. Together with the Tip Protection Head Also Suitable for Slip-Proof Use On Components with Dil Grid. 2 Mm + 2.4 Mm Lamella-Basket Probes for Measuring At Terminal Blocks. Versions Available as Test Probe with Axial Safety Socket as Well as with Assembled Test Lead. When Worn, the Test Probe Insets Can Be Ordered Separately. a Cost-Saving Factor Over a Period Of Time as Well as An Environmental Aspect. Safety Test Probe With Inline Safety Socket with Flexible Tip for Measuring in Inaccessible Places Socket Ø 4 Mm

Product Detail

New items

BU-26106-2, Mueller Electric

Mueller Insulated Plug-On Test Prod with Stainless Steel Tip Insulated plug-on test prods with 2 mm stainless steel tip and nylon housing. (Stock numbers 714-8207 and 714-8216 have a 8-32 thread on the point).These test prods are compatible with both insulated, non insulated or retractable 4mm banana plugs which are connected via a 4mm nickel plated brass banana jack. The length of these plug-on test prods is 83mm and they have a safety shock guard collar which is flat on one side to prevent rolling.

Product Detail

New items

P01295460Z, Chauvin Arnoux

The Chauvin Arnoux moulded test probe comes with red and black colour. Designed to last longer than any other leads currently available Resist melting if they come in contact with hot surfaces

Product Detail

New items

RS SPS 2700 Ni / SW, Schutzinger

The Schutzinger Safety test probe has 10 A rated current and 1000 V CAT II also inline safety socket terminal, socket Ø 4 mm with black color. Nickel-plated contact parts Nickel-plated tip Insulation PA 6.6 (Polyamide), Polyolefin Operating temperature from - 25 °C to + 80 °C

Product Detail

New items

972319101, Hirschmann Test & Measurement

4 mm probe tip, PRÜF 2700, 1000 V Safety probe tip with dual function Tip for piercing insulation and oxide layers, and Ø 4 mm pin to plug into sockets Ø 4 mm socket connector made from brass Safety test leads can be plugged in Standard: IEC 61010 Voltage rating: 1000 Vac / Vdc Measurement category: CATIII Temperature range: -25 ºC → +80 ºC

Product Detail

New items

973659100, Hirschmann Test & Measurement

PRUEF 2 S Contact Protected Test Probe Hirschmann Test and Measurement CAT I 4mm safety range, unsprung needle point stainless steel test probes with shatter proof insulated sleeve and a rear 4 mm socket. Insulation and oxide layers can be penetrated by the 2mm needle point of these safety series test probes, offered in black and red colours. Features CAT I Voltage rating 30 VAC/60VDC Contact resistance 10mΩ

Product Detail

New Items

975017700, Hirschmann Test & Measurement

AC288, Fluke

TP220-1, Fluke

6411, Pomona

TL221, Fluke

TP1-1, Fluke

SPS 8034 Ni / RT, Schutzinger

BU-26106-2, Mueller Electric

P01295460Z, Chauvin Arnoux

RS SPS 2700 Ni / SW, Schutzinger

972319101, Hirschmann Test & Measurement

973659100, Hirschmann Test & Measurement

FAQs