Din Rail | Enclosure With Din Rail

New items

0 428 71, Legrand

Control Panel Primary 230/400Vac (40 to 220VA) Compact, open type control panel transformer Fully shrouded screw terminals with permanent marking Detailed product specification permanently marked on front of unit VA ratings compatible with available protection devices Dual standard primary winding 230 / 400Vac Construction Class 1 Insulation 3550V (Primary to Secondary); 2400V (Primary to Earth); 250V (Secondary to Earth) Operating Temperature +35°C (Max Ambient) Note Mounting clips are not supplied with these products. Transformers up to 160 VA can be clipped to DIN rail using accessory 0044 16, RS stock number 423-2201 or 620-3592 for higher values or directly fixed using screws through the easily accessible fixing points. Standards IEC/EN 61 558 Approvals 8888 Standards IEC/EN 61 558-2-6 Laminated

Product Detail

New items

FST 160/24, Block

BLOCK FAIL-SAFE Transformer High-quality multi-purpose FAIL-SAFE transformers. The transformers are designed for the electrical isolation of the input and output sides. The FAIL-SAFE transformers are suitable for the construction of both SELV and PELV electrical circuits. 6.3 x 0.8 mm Tab Connector 4mm² Screw Terminals

Product Detail

New items

0 442 02, Legrand

Control and signalling transformers, 442 series Single-phase control and signalling transformers (50 → 60 Hz - class 1). Active parts protected by cover up to 1000 VA. Mounting on full or perforated platinum, or rail according to power. Direct mounting possible on symmetrical DIN rail up to 250 VA. More compact than previous models (423 series). Interference filtering (except stock no. 620-3110 ). Voltage adjustment: ±15 V. Features a marking area. Supplied with connection strip 0 V secondary earth terminal. Ref. Secondary voltage Power Dimensions Weight Legrand (V) (VA) L x W x H (kg) 442 02 24 V 63 95 x 101 x 113 1.75 442 03 24 V 100 95 x 111 x 113 2.15 442 04 24 V 160 95 x 128 x 113 2.35 442 11 24 V 40 94 x 78 x 113 1.23 442 12 24 V 63 94 x 85 x 113 1.56 442 13 24 V 100 94 x 94 x 113 1.95 442 14 24 V 160 94 x 112 x 113 2.6 442 15 24 V 250 106 x 123 x 115 3.82 442 16 24 V 400 120 x 140 x 140 5.62 442 32 24 → 48 V 63 94 x 85 x 113 1.56 442 33 24 → 48 V 100 94 x 94 x 113 1.95 442 34 24 → 48 V 160 94 x 112 x 113 2.6 442 35 24 → 48 V 250 106 x 123 x 115 3.82 442 62 115 → 230 V 63 94 x 85 x 113 156 442 63 115 → 230 V 100 94 x 94 x 113 195 442 64 115 → 230 V 160 94 x 112 x 113 2.6 442 65 115 → 230 V 250 106 x 123 x 115 3.82 442 66 115 → 230 V 400 120 x 140 x 140 5.62 442 67 115 → 230 V 630 150 x 158 x 206 9.9 Approvals CSA C22-2-N°66. Standards EN 61131-2, EN 60204-1 and EN60439-1, IEC EN 61558-2-2 and 2-4 or 2-6, UL506

Product Detail

New items

STS130/23/24, Block

Control Transformers, 230 V AC, STS Series This series of control transformers stands out thanks to the following special features: The control transformers are designed for a low voltage drop between idling and load mode. This means they fulfil current and future national and international regulations regarding the supply of equipment, components and appliances. Manufactured in accordance with VDE 0550, IEC 989 with VDE, UL and SEV test marks. Low voltage drop High performance during short-term operation International standard voltage 230 V/400 V in accordance with DIN IEC 38 Primary-side ±5% taps to adjust the voltage Can be used worldwide as it fulfils national and international regulations High power output per volume thanks to compact design Standard humidity protection by means of waterproofing Contact-protected connector points for screw connectors or plug connectors Quick fastening, suitable for 35 mm rail terminal in accordance with DIN EN 50022 Input voltage 230 V Output voltage 24 V Type Unloaded secondary voltage approx. Efficiency (%) Weight kg 20 VA Load: V ´ 1.10 81 0.9 63 VA Load: V ´ 1.10 84 1.3 100 VA Load: V ´ 1.10 86 2.2 130 VA Load: V ´ 1.10 86 2.4 160 VA Load: V ´ 1.09 87 2.9 250 VA Load: V ´ 1.08 90 3.9 Dimensions (mm) Type A B C D 20 66 84 81 42 63 78 88 89 44 100 84 81 95 53 130 96 83 105 48 160 96 94 105 53 250 96 107 105 61 Input voltage 400 V Output voltage 230 V Type Unloaded secondary voltage approx. Efficiency (%) Weight kg 20 VA Load: V ´ 1.10 81 0.9 63 VA Load: V ´ 1.10 84 1.3 100 VA Load: V ´ 1.10 86 2.2 130 VA Load: V ´ 1.10 86 2.4 160 VA Load: V ´ 1.09 87 2.9 250 VA Load: V ´ 1.08 90 3.9 Ambient temperature: +40 °C Insulation system insulation category: E

Product Detail

New items

STS250/23/24, Block

Control Transformers, 230 V AC, STS Series This series of control transformers stands out thanks to the following special features: The control transformers are designed for a low voltage drop between idling and load mode. This means they fulfil current and future national and international regulations regarding the supply of equipment, components and appliances. Manufactured in accordance with VDE 0550, IEC 989 with VDE, UL and SEV test marks. Low voltage drop High performance during short-term operation International standard voltage 230 V/400 V in accordance with DIN IEC 38 Primary-side ±5% taps to adjust the voltage Can be used worldwide as it fulfils national and international regulations High power output per volume thanks to compact design Standard humidity protection by means of waterproofing Contact-protected connector points for screw connectors or plug connectors Quick fastening, suitable for 35 mm rail terminal in accordance with DIN EN 50022 Input voltage 230 V Output voltage 24 V Type Unloaded secondary voltage approx. Efficiency (%) Weight kg 20 VA Load: V ´ 1.10 81 0.9 63 VA Load: V ´ 1.10 84 1.3 100 VA Load: V ´ 1.10 86 2.2 130 VA Load: V ´ 1.10 86 2.4 160 VA Load: V ´ 1.09 87 2.9 250 VA Load: V ´ 1.08 90 3.9 Dimensions (mm) Type A B C D 20 66 84 81 42 63 78 88 89 44 100 84 81 95 53 130 96 83 105 48 160 96 94 105 53 250 96 107 105 61 Input voltage 400 V Output voltage 230 V Type Unloaded secondary voltage approx. Efficiency (%) Weight kg 20 VA Load: V ´ 1.10 81 0.9 63 VA Load: V ´ 1.10 84 1.3 100 VA Load: V ´ 1.10 86 2.2 130 VA Load: V ´ 1.10 86 2.4 160 VA Load: V ´ 1.09 87 2.9 250 VA Load: V ´ 1.08 90 3.9 Ambient temperature: +40 °C Insulation system insulation category: E

Product Detail

New items

4AM4642-4TN00-0EA0, Siemens

Control transformers, 1-phase, 4AM Series Use as power, safety or displacement transformers in accordance with the applicable EN norm High short-term performance Low switch-on power (switch-on rush) Protect against short circuits and overloading with motor protection switches on main side Electrically isolated coils Screw terminal connectors Input voltage: 230 V AC / 400 V AC, single phase, 50 → 60 Hz Protection class 1 Temperature category: B Protection class: IP00 Ambient temperature: -25 °C → +40 °C Type Dimensions L x W x H (mm) Assembly drill holes (mm) Weight kg 4AM38 98 x 102 x 106 86.5 x 84 2.8 4AM40 98 x 102 x 106 86.5 x 84 3.9 4AM43 107 x 103 x 111 83 x 80.5 4.5 4AM46 122 x 102 x 121 85 x 90 5.4 4AM48 122 x 123 x 121 104 x 90 7.0 4AM52 152 x 111 x 144 90 x 122 7.9 4AM57 152 x 154 x 144 130 x 122 14 4AM61 176 x 155 x 164 126 x 145 19 4AM64 176 x 177 x 164 146 x 145 23 4AM65 194 x 188 x 180 164 x 160 29.0 Standards EN 61 558-2-1, EN 61 558-2-2, EN 61 558-2-4 (at U SEC > 50 V AC), EN 61 558-2-6, VDE 0570 Approvals CE, UL

Product Detail

New items

0 442 31, Legrand

Control Transformers Safety isolating transformer single phase DIN rail mount (up to 250VA) or Surface mount with screws (400VA & above) Terminals with finger protection IP2x or xxB up to 400VA New design provides interference filter between windings Clear laser engraved markings Suitable for maximum 50°C ambient, without de-rating Standards IEC 61-558-2-2 and 2-4 or 2-6 Supplied with 0V/earth connection link 12, 24, 48, 115 And 230 Vac DIN-Rail, Panel, Wall Mounting Transformers

Product Detail

New items

0 442 65, Legrand

Control Transformers Safety isolating transformer single phase DIN rail mount (up to 250VA) or Surface mount with screws (400VA & above) Terminals with finger protection IP2x or xxB up to 400VA New design provides interference filter between windings Clear laser engraved markings Suitable for maximum 50°C ambient, without de-rating Standards IEC 61-558-2-2 and 2-4 or 2-6 Supplied with 0V/earth connection link

Product Detail

New items

TBD215012F9, Comatec

The Comatec DIN Rail Transformer of the TBD2 range have been conceived for installation in the Home and industrial Automation sector. They are used in the electric panels as well as in applications where the isolation class II, extremely compact dimensions and a long-term reliability are required. Input voltage: 230 Vac Output voltage: 12 Vac Nominal current: 12,5 A Nominal power: 150 VA Case: 9M (TE) Type of product: Transformer Type of installation: Din rail mounting Type of technology: AC/AC Weight: 2.10kg

Product Detail

New items

TBD2 050 24 F6, Comatec

The Comatec Din rail Transformer have been designed for installation in home and industry automation. They can even be installed in electric panels as well as in applications where an isolation class II, extremely compact dimensions and a long-term reliability are required. Input-230 Vrms Output-24 Vrms 50 VA Frequency-50-60 Hz Efficiency is 85.00%

Product Detail

New items

STS160/4/23, Block

Control Transformers, 230 V AC, STS Series This series of control transformers stands out thanks to the following special features: The control transformers are designed for a low voltage drop between idling and load mode. This means they fulfil current and future national and international regulations regarding the supply of equipment, components and appliances. Manufactured in accordance with VDE 0550, IEC 989 with VDE, UL and SEV test marks. Low voltage drop High performance during short-term operation International standard voltage 230 V/400 V in accordance with DIN IEC 38 Primary-side ±5% taps to adjust the voltage Can be used worldwide as it fulfils national and international regulations High power output per volume thanks to compact design Standard humidity protection by means of waterproofing Contact-protected connector points for screw connectors or plug connectors Quick fastening, suitable for 35 mm rail terminal in accordance with DIN EN 50022 Input voltage 230 V Output voltage 24 V Type Unloaded secondary voltage approx. Efficiency (%) Weight kg 20 VA Load: V ´ 1.10 81 0.9 63 VA Load: V ´ 1.10 84 1.3 100 VA Load: V ´ 1.10 86 2.2 130 VA Load: V ´ 1.10 86 2.4 160 VA Load: V ´ 1.09 87 2.9 250 VA Load: V ´ 1.08 90 3.9 Dimensions (mm) Type A B C D 20 66 84 81 42 63 78 88 89 44 100 84 81 95 53 130 96 83 105 48 160 96 94 105 53 250 96 107 105 61 Input voltage 400 V Output voltage 230 V Type Unloaded secondary voltage approx. Efficiency (%) Weight kg 20 VA Load: V ´ 1.10 81 0.9 63 VA Load: V ´ 1.10 84 1.3 100 VA Load: V ´ 1.10 86 2.2 130 VA Load: V ´ 1.10 86 2.4 160 VA Load: V ´ 1.09 87 2.9 250 VA Load: V ´ 1.08 90 3.9 Ambient temperature: +40 °C Insulation system insulation category: E

Product Detail

New items

TBD2.0100.24.F8, Comatec

TBD2 Series DIN Rail Tranformer TBD2 transformers have been developed for the installation in home and industry automation. Developed for DIN-rail mounting, these products can also be fixed to a wall (cover for the input clamps, fixing kit containing 2 screws and 2 dowels on request) Switch Mode - Comatec

Product Detail

DIN Rail Transformers

New Items

0 428 71, Legrand

FST 160/24, Block

0 442 02, Legrand

STS130/23/24, Block

STS250/23/24, Block

4AM4642-4TN00-0EA0, Siemens

0 442 31, Legrand

0 442 65, Legrand

TBD215012F9, Comatec

TBD2 050 24 F6, Comatec

STS160/4/23, Block

TBD2.0100.24.F8, Comatec

FAQs