Discounted Products

RES SMD 3 OHM 1% 1/8W 0805

Union Y KQ2U The KQ2U union Y fittings from SMC are quick and easy to install into your pneumatic fittings. These KQ2U union Y's are also more compact in design which means that these connectors can be used within a confined space. Union Y fittings are to used to connect tubing in the same direction. The new KQ2 range of products are lighter than previous models and have the advantage of improved insertion and removal forces. Can be used under a wide range of pressures from a low vacuum to 1MPa Low force required for fitting and removal Compact dimensions for use within smaller spaces Tube-to-Tube Fittings & Plugs Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance. Maximum operating pressure 10 bar Maximum vacuum operating pressure -100kPa Proof pressure 3MPa Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)

CONN TERM BLK FEED THRU 12-26AWG

Latch Clamp A latch clamp which can be configured for either horizontal or vertical (corner) operation. Two versions are available, one in zinc plated and passivated steel, the other in stainless steel Nominal holding force 2000N (204kgf) Handle opening angle 120° Note The U-bolt and its fittings are supplied loose allowing the clamp to be assembled in either the vertical or horizontal configuration.

Model - 15CN - Replacement Filter Element Micro-glass replacement elements with a multi-layered design for high efficiency. The elements are suitable for Parker 15CN series medium pressure hydraulic filters. These filter / element combinations are installed downstream of the pump for protecting critical hydraulic components against dirt and matter generated within the pump. Applications The 15CN series filter is suitable for medium and low pressure sytem filtration requirments in a number of installations including, Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment Pilot Lines For Servo Controls Oil Patch Drilling Equipment Injection Moulding Medium & Low Pressure

RS Pro safety Isolation Transformer 230V standard RS Pro portable isolating transformer designed to isolate standard 230 V mains voltage supply. This isolating transformer is single phase, high quality and manufactured in the UK.Encased in a robust GRP enclosure. Manufactured to BSEN 61558 and fully compliant with reduced voltage regulations. Thermal magnetic trip which reduces the chance of overload. Class 1 Standards BS EN 61558, BS EN 61558-20-23, BS EN 60529 ,RoHS Directive 2011/65/EU Portable 230V ac Input - 230V ac Output

Compact High Performance Fan Heaters - CR/CS Series The CR/CS series of compact high performance fan heaters prevent formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The plastic enclosure provides double insulation and acts as protection against contact. Compact design Double insulated DIN Rail Mount Enclosure Heaters Heaters specifically intended for anti-condensation and frost protection in control and equipment cabinets. All types are supplied with DIN rail mounting hardware.

ARTEOR™ Support Frames ARTEOR ™ Support frames for ARTEOR™ BS type boxes (60.3mm centres) are supplied with screws: RS 815-9636 for 2x2 module BS 2 gang boxes RS 815-9630 for 3 module BS 2 gang boxes RS 815-9649 for 1-2 module 1 gang BS boxes Support Frames for French and German boxes: RS 815-9642 for 1-2 module 1 gang NF TUV boxes Support frames for Italian / USA boxes with 83.5mm centres: RS 815-9646 for 1-2 module 2 gang IT USA boxes Supplied with The BS frames are supplied with screws Legrand ARTEOR™ Wiring Accessories Legrand ARTEOR™ wiring accessories provide versatility, style and functionality. ARTEOR™ is the innovative answer to the increasingly complex demands of modern buildings. Much more than just a wiring accessory, ARTEOR™ is the ideal choice for any residential or commercial project offering an array of functionality with easily customisable stylish finishes.

PUSH BUTTON MULTI-CHANNEL SWITCH

RS PRO Hook Up Wire - UL1015 Our RS PRO range of hook up wires keeps on improving. We are pleased to introduce a new series of UL 1015 flexible hook-up wire perfect for internal wiring and electrical equipment. These 24 AWG copper conductor wires are supplied on a reel with red, green or black insulated sheaths, and offered in 100 metre lengths. Upon inspection the cables are solid, extremely robust, core strands are tinned copper and have a voltage rating of 600 V. The equipment wires are protected with insulation made from high-quality PVC ensuring the cables are reliable and meet the criteria for installation. What is a 24 AWG hook-up wire? A 24 AWG hook up wire is primarily used for internal wiring applications. The inner core is very strong, flexible and equally as strong as single core conductors, so they have a long service life. They offer a larger diameter perfect for being pulled and routing during installation. Features and Benefits • Voltage rating 600 V • Rated Temperature -5°C to +105°C • Core Strands: 7/0.2 mm • Tinned copper conductor wire - 24 AWG (American Wire Gauge) • Cross Sectional Area: 0.2 mm² • Insulation: PVC • Fire Resistant, Flame Retardant • Supplied on 100 m reel • UL & CSA Approved RS PRO UL1015 Hook Up Wires Options – 24 AWG • 100 Metre Reel, Black, RS stock no: 207-5288 • 100 Metre Reel, Green, RS stock no: 207-5289 • 100 Metre Reel, Red, RS stock no: 207-5290 Applications Hook up wire can be used for a broad range of applications that include; • Electrical Equipment • Electronics • Motors & Transformers Why would you choose RS PRO for Hook Up Wires? Our extensive range ensures we have your ideal solution available. Browsing our offer has vastly improved making it simple to select your hook up wire of choice. Our products are supported with technical information and customer service we are sure you will appreciate.

The Siemens miniature circuit breaker are current limiting design provide the highest quality and reliability. It has a quick and easy installation. It has DIN rail assembly mounting type. Its used 10kA of breaking capacity. It used in industry and in the Protection class is IP20 Number of pole is 3

Low Smoke Halogen Free Single Core Cable - H07Z-K A flexible low smoke halogen free single core cable for internal wiring Intended for installation within conduits and trunking, as well as internal wiring within appliances and fittings Can be used in all areas where in an event of fire a protection of people and equipment is paramount Flame retardant in accordance to IEC 60332-1-2 Smoke density in accordance to IEC 61034 Halogen free in accordance to IEC 60754-1 Working voltage 450/750V Test Voltage 2500Vac Temperature range -15°C → +90°C

Panel Mount (Padlockable) RS Pro high quality range of panel mount switch disconnectors for use with low voltage switchgear such as power distribution, load isolation and motor start/stop. All switch ratings at AC22 RoHS compliant Maximum panel thickness 3mm Depth behind panel 102min/117max mm Dimensions 72(H)x50(W) mm Actuator dimensions 64x64x32mm Approvals UL, CSA

6011 Series Two-Way, Miniature Normally Closed Solenoid Valves - Threaded Port Connection Coil changed easily with valve in place Coil can be locked in four 90° positions or move free between, as required Brass body, polyamide coil and FPM high quality seal material Suitable for compressed air, water, hydraulic oil Operating temperature -10 to +100°C max. Power consumption 4W DC; 9VA (Inrush); 6VA (Hold) Protection to IP65 with cable plug DIN43650C Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

heatTHERM-DR - Safety temperature limiter Thermostat for top-hat rail assembly Must be unlocked manually if the limit value is exceeded The current circuit remains open if the measuring system is destroyed Capillary length 2000 mm Stable switch point position through ambient temperature compensation Push-in connection technology reduces installation time by 50 % Protection system IP20 Standards DIN EN 14597

Mildew Resistant Silicone Sealant A one-part, acetoxy, silicone rubber sealant which has excellent adhesion to a variety of surfaces.Contains a food grade fungicide.,Ideal for sealing refrigeration units and areas where food contact is likely. (Meets US Food and Drugs Administration Regulation Number 21CFR177.2600) Conforms to BS5889 Type B Fast cure High modulus-acetoxy cure type Approvals BS5889 Type B, FDA No. 21CFR177.2600

IP66 Spacial CRN Enclosures These Spacial CRN enclosures from Schneider Electric have a steel monobloc construction with a punched steel door. The sides are made from a single folded section and the back is welded with a double profile to form a protected sealed area. The Spacial CRN is painted externally and internally with a textured light grey RAL 7035 epoxy-polyester resin. Features & Benefits 4 wall fixing drill holes sealed with plastic plugs to ensure the degree of protection Direct cable entry Built in cable entry plate, flush with the back of the enclosure (without foamed in gasket to facilitate machining) Easy to equip with 4 welded back studs Monobloc construction with a punched metal door Foamed in polyurethane gasket on the doors Easily reversible door, fixed with metal hinges allowing the door to open to 120° Welded earth studs on door and body IP66 protection IK10 shock resistant RoHS compliant Applications The Spacial CRN enclosures are designed for electrical distribution, industrial automation and industrial control. Note Wall brackets available seperately. Standards UL, CUL, NEMA 4 according to NEMA 250 3mm double bar lock

SIBA HBC Ceramic Cartridge Fuse Type gR SIBA cylindrical ultra-rapid fuses are available in six different sizes. They can be fitted with or without a built-in striker pin for fuse blown indication or operation of microswitches. High interrupting rating up to 300 kA Voltage rating AC 250 V to AC 1000 V Protection of Power Semiconductors according to IEC 60269-1 and -4 Available with integrated striker pin Classes according to IEC 60269-4 and DIN VDE 0636-40 Fuse-holder / fuse-clips and accessories are available Standards IEC 60269-4; DIN VDE 0636 Teil 40 and UL248-13 Approvals IEC 60269 - 4; DIN VDE 0636 Teil 40; UL 248 - 13

Lexium 28 Accessories A range of accessories to suit the Lexium 28 series of servo drives and motors. Schneider Electric Lexium 28 The Lexium 28 range of servo drives and motors that are suitable for a wide range of positioning and precision speed control applications including, printing, packaging, winding and unwinding as well as materials handling. The servo drives cover a wide range of power ratings from 0.05kW to 4.5kW, with two different types of power, single phase and three phase.

RS Pro Thermoplastic Free Swinging Hinges

IP66/IP67 Euronord Aluminium Enclosures The Euronord range of enclosures from Fibox are designed to house DIN-rail mounted terminal blocks and various types of sensors. The enclosure lid has a polyurethane sealing gasket, and can be easily sealed with a single 90° turn on the quicklock stainless steel screw. Grey polyester powder paint (RAL7001) Temperature range -50°C to +80°C (continuous), -50 to +140°C (short term) Ingress protection (EN 60529) IP66 / IP67 Impact resistance (EN 62262) IK08 RoHS Compliant and Halogen Free Standards EN 62208:2003 (50298:1998). EN 60950. Approvals UL Type 1, 4, 4X, 12, 13 (USA); IP 67/IP 66 (EURO); IEC 529 (OTHERS)