Discounted Products

Cable Tie Tool for Stainless Steel Ties A high quality and cost-effective tensioning and cutting tool for stainless steel cable ties of up to 12mm width. Features and Benefits Easy and comfortable to use and hold Tension and manually cut stainless steel cable ties Flush cutting High quality For use with cable ties up to 0.3 mm thick and 12.3 mm wide

IP68 Metric Dome Top Gland Nylon cable gland supplied complete with locknut and entry thread seal. Features and Benefits • Manufactured from UL approved Nylon 66 • Flammability rating to UL 94V-2 • Provides watertight seal to IP68 • Offers strain relief and protection for cables

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand and left-hand use and with 9x12mm insert square for the insertion of insert tools. For 9x12 mm interchangeable insert tools Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 20-100 Nm: Precise to +/- 3% Very robust design with ergonomic 2-component handle suitable for right-hand use

Panasonic Rechargeable NiMH LFat A Battery Panasonic Standard type NiMH battery can be used in wide range of environments and in various applications such as mobile devices and electrically powered devices. They also offer excellent cost performance, long-life, small and lightweight, to help save space and reduce weight in your application Excellent cost performance High capacity Rapid charge capable Application: Small consumer electronic, Two way radio, Measuring instrument, Medical equipment, etc.

TLS-GD2 Solenoid Interlock Switch, for Demanding Applications Features & Benefits Note The TLS-GD2 is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. The switch has three safety (N.C.) contacts and two auxiliary (N.O.) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. A blanking plug is provided to seat the unused slot. The guard may only be opened when a signal is applied to the TLS-GD2 internal solenoid which releases the lock mechanism. Therefore this solenoid interlock switch is ideal for machines which do not stop immediately or where premature interruption of the machine could cause damage to tooling and components or cause an additional hazard. The safety switch is available in three types. The TLS-1 GD2 and TLS-3 GD2 incorporate a power-to-release function. Two manual release points with security screws allow the locked TLS-GD2 to be released in emergencies. An optional lid-mounted key-release style can also be supplied. The TLS-2 GD2 has a power-to-lock function. Each type of switch has five sets of contacts of various forms and are suitable for use with PLCs. The TLS-1 GD2 and TLS-3 GD2 are both available with escape release options. They are intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This allows the intentional unlocking of the TLS-GD2 from inside a hazardous area, providing a means of escape for a person who may become trapped. A stainless-steel actuator guide is fitted to protect the switch from actuator damage due to poor guard alignment or guard wear. TLS-GD2 has an ingress protection rating ...

Hasp and Staple Cupboard Latches These latches are very useful for securing cupboard doors Fixing, 3 or 4mm dia countersunk screws Zinc plated steel with 304 stainless steel springs (latches only) Catches 7 to 9 are Zinc plated steel Latches and catches available in 3 sizes Use catch 7 with latches 1 & 4, catch 8 with latches 2 & 5 and catch 9 with latches 3 & 6 Catches must be ordered separately Dimensions (mm) A B C D E F G H I J Latches 1 & 4 35 19 11 23 2.0 11 19 9 3 8 2 & 5 50 30 16 34 3.0 15 27 14 4 12 3 & 6 70 38 22 44 3.5 20 38 18 6 16 Catches 7 35 11,5 11 23 1,2 - - - - - 8 50 16 16 34 1,5 - - - - - 9 70 19 22 44 2 - - - - - Note Catches sold separately for catches please see stock numbers 281-1010 , 281-1026 , 407-7199 Note Catches sold separately for catches please see stock numbers 281-1010 , 281-1026 , 407-7199

11 Pin Timer, H3CR-A Functions - 143,211,453,521,611,612 LED indication of power and contact status Note Adaptor is not supplied and must be ordered separately see stock number 342-916 Approvals UL, CSA. Standards Conforms to EMC standards.

The VIZIR eye shield protects the eyes against projectile hazards. It is easy to install on VERTEX and STRATO helmets with the EASYCLIP attachment system. It also has scratch-resistant and anti-fog coatings. Protects eyes from projectile hazards: Transparent eye shield Treated to resist scratches and fogging Allows glasses to be worn Compatible with VERTEX (1) and STRATO helmets: Quick and easy installation, thanks to the included EASYCLIP attachment system Pivots quickly from work position to storage position on top of the helmet Can be worn with a Petzl headlamp, when the lamp is mounted on the front and rear mounting slots Compatible with protector for VIZIR and VIZIR SHADOW

The Iko Nippon Thompson 4x7x30mm precision linear slide unit. In this the track portion and mounting surface integrated and made into a rolling guide by precisely moulding a stainless steel plate into a U shape. Since high performance and quality can be stable . Stainless steel used for all steel component so they are suitable for a cleanroom environment. High safety Stable performance Light weight and compact Quiet and smooth operation

P2RF- ESS Series Omron P2RF-ESS series rise-up terminal sockets. Double wiring available on all the terminals Release lever enables easy replacement Finger-protection: IP20 UL/CSA/TUV/Lloyd's certification RoHS certified Operating temperature: -25º to +70º Socket accessories also available

Stainless Steel Cable Ties These stainless steel cable ties are an ideal alternative where nylon cable ties are not suitable. 316 Stainless steel has excellent resistance to abrasion, corrosion, radiation, weathering and extremes of temperature. They have a greater load carrying capacity and may be used for general strapping applications. Features and Benefits • Available in uncoated and polyester coated stainless steel • Flame retardant • High tensile strength • Self-locking design • Excellent resistance to high temperature, chemicals, weather and abrasion Applications Suitable for applications in industries such as oil and gas, marine, chemical and maintenance. Approvals ABS, DNV, Lloyd's, UL Standards IEC 62275 (2006), UL-1565

Electrical Cable Cleaner Effective and safe cleaners based on the power of orange oil. The safe alternative to chlorinated solvents with zero ozone depletion potential.,Natural solvent based systems with long active life, low vapour pressure and exceedingly low VOC rating. The alternative to highly volatile or toxic cleaners such as chlorinated and aromatic hydrocarbon solvents.,Powerful, yet safe cleaner for removing heavy contaminants from electrical joints, connections, switch gear, circuit boards etc. Can be applied directly with a cloth and suitable for component soaking. Effective against solder flux, greases etc Will not affect most cable insulation or circuit boards High dielectric strength, safe for use on electrical apparatus Flammable (refer to MSDS)

855PB Static / Flashing LED 22.5mm panel mount Static or Flashing selectable IP65 rating

The Siemens power contactor are suitable for use in any climate. The contactor have spring type terminal for main and control circuit and or snapping onto 35mm standard mounting rails. It is highly reliable and of extremely good quality. The size of conta Contact voltage rating is 400 V Maximum operating temperature is +60°C

Mounting accessory: piston rod ball joint Applicable to bores: 32∼250mm

HTCP - Non Silicone Heat Transfer Compound Plus A non silicone heat transfer compound containing various metal oxide (ceramic) powders which give exceptional thermal conductivity. Excellent non creep characteristics Excellent thermal conductivity even at high temperatures Easy to handle Low evaporation weight loss White colour for ease of identification in use Specific resistance: 1 x 10 14 Ω cm

Earth Terminals Earth terminal blocks that provide reliable electrical and mechanical contact with the DIN Rail. Features and Benefits • Green/yellow colour coded • Flexibility to snap onto symmetrical and asymmetrical rails • Screw clamp connection Approvals UL Listed; CSA Certified; ASE; SETI; SEMKO; NEMKO; DEMKO; GOST; KEMA; E ExiI/II; E Exei/II

Face Mount - 10mm Shaft SICK STEGMANN High-resolution Incremental Encoders The DFS60 programmable incremental encoders can be programmed to produce any ppr from 1 to 10000. In addition , the output signals are software selectable: TTL/RS422 or HTL/Push-pull, making the DFS60 a truly universal incremental encoder. The programming tool consists of a USB lead and Windows XP/Vista/7 compatible software, designed for ease of use, enabling on site programming in seconds. Any PPR can be programmed from 1 - 10000 Programmable output levels TTL (RS422) or HTL (Push-pull) Solid shaft or hollow shaft design Electronic adjustment of zero pulse width and position Sealed to IP65 Highly robust due to metal code disc Wide temperature range -30 → +100 °C A flexible, reliable encoder for multi-purpose use

SWITCH NEG OUTPUT SUB-BASE MNT

Water Based Leak Detector Designed for safe detection of gas and air leaks No oils, silicones or harmful solvents, no 'run-off' hazard Non-flammable, completely odourless Highlights all leaks, even under low pressure 360° spray system to facilitate application at difficult angles and inaccessible locations Leak detector 400ML canister

Busbar Feeder Three-phase busbar systems provide an easy, time-saving and clearly arranged means of feeding 3RV2 motor starter protectors with screw terminals. The system can be used with various types of motor starter protectors up to 32 A. The 3RV19 15 three-phase busbar systems are generally unsuitable for the 3RV21 motor starter protectors for motor protection with overload relay function and for the 3RV27 and 3RV28 circuit breakers according to UL 489/CSA C22.2 No.5-02. The busbars are suitable for between 2 and 5 motor starter protectors/circuit breakers. However, any kind of extension is possible by clamping the connection tags of an additional busbar (rotated by 180°) underneath the terminals of the respective last motor starter protector. A combination of motor starter protectors of different sizes is possible. The motor starter protectors are supplied by appropriate feeder terminals.

Carel PJ Easy Controller Dedicated refrigeration controllers designed specifically for chilled showcases, refrigerated units and display cases. PJEZS (Stock No. 809-0997 ) Designed with static refrigeration units in mind and a single NTC Sensor input PJEZC (Stock No. 809-0994 & 913-9983) Ventilated unit dedicated controller, suitable for use in a variety of ventilation environments including compressors & defrost control. Supports 2 NTC probe inputs accompanied by a digital or 3rd NTC input PJEZY (Stock No. 809-0985 & 913-9986 ) Specifically for use on static units with active defrost via heater, control & defrost NTC input Serial connection for comprehensive compatibility Preset configurations and programme key ensures swift set up NTC thermistor input supported IP65 front panel mounting Integrated real time clock and buzzer Carel Easy Series

Cable Sockets From Binder, this Series 723 miniature cable mount socket is screw-locking for secure and reliable mating attenuation. Easy to assemble and featuring internal strain relief, this connector has a robust metal construction. When mated, Series 723 connections are sealed to IP67 which means complete protection from contact dust and excellent protection against water. Ways 2 3 4 6 7 8 12 24 Current Rating (A) 7 7 6 5 5 5 3 1 Voltage Rating (Vac) 250 250 250 250 250 60 60 60 Max. Wire Gauge (mm²) 0.75 0.25 0.14 Cable Outlet Size 4 - 6mm 6 - 8mm Contact Material, Pin Brass Contact Material, Skt Bronze Contact Plating Silver Gold Contact Resistance ≥5mΩ ≤3mΩ Insulation Resistance ≥10 10 Ω Mating Cycles >500 Operating Temperature -40°C to +85°C Cable Connector Material PA66 Panel Connector Material Nickel plated zinc diecasting Flammability Rating UL94-0 (inserts), UL94 HB (cable connector housing)

1S Servo Drives Professional range of 1S servo drives from Omron. The sysmac general purpose single phase servo drives are compatible for 1S Servo motors making up the 1S servo system designed to optimise the full cycle. All 1S servo drives are reliable and excellent quality.Features & Benefits 230 V ac single phase: 100 W to 1.5 kW 23-bit resolution encoder Fast and secure screw-less push in in all connectors Pluggable connectors for easy pre-wiring and system maintenance Direct wiring of I/O signals Embedded relay for direct motor brake control Improved loop control for overshoot and quick setting time Safety function built in: Network Safe Torque Off: PLd (EN ISO 13849-1), SIL2 (IEC 61508) Hard wired Safe Torque Off: PLe (EN ISO 13849-1), SIL3 (IEC 61508)Omron Servo Motors & Drives

Camlocks Each lock is supplied with 2 keys that turn 180° to the right. These locks are divided into groups of 3 different body lengths:  13; 19; 33 mm. For each length there is: - one lock with one twin entry key offering up to 500 different combinations. - while other models have key combinations that are standard within the electrical industry:  405; 455; 1242E; 2433A. Shiny chrome finish and stainless steel cover.