Discounted Products

Stainless Steel Cable Ties These stainless steel cable ties are an ideal alternative where nylon cable ties are not suitable. 316 Stainless steel has excellent resistance to abrasion, corrosion, radiation, weathering and extremes of temperature. They have a greater load carrying capacity and may be used for general strapping applications. Features and Benefits • Available in uncoated and polyester coated stainless steel • Flame retardant • High tensile strength • Self-locking design • Excellent resistance to high temperature, chemicals, weather and abrasion Applications Suitable for applications in industries such as oil and gas, marine, chemical and maintenance. Approvals ABS, DNV, Lloyd's, UL Standards IEC 62275 (2006), UL-1565

Hi-torque Hose Clip Heavy-duty Hi-torque™ hose clips Made from A2 Stainless steel Suitable for tough and wire-reinforced hoses Higher sealing pressures due to the ability of being tightened to more than twice the torque of ordinary clips 8mm slotted hex securing screw Recommended torque=15Nm

Spiraband Mandrel An expanding rubber mandrel expands when in use to grip an abrasive spiraband 6mm diameter shaft Accepts 25mm wide bands Note Minimum speed is that required to effectively expand the mandrel in use.

SolaHD Hazardous Location Transformers These heavy-duty encapsulated transformers have been designed for use in hazardous locations (Class 1, Division 2, Group A-D). They are also suited to harsh industrial environments. The encapsulation and rugged NEMA 3R enclosures help to provide protection from dust, moisture and also provide extra shock and vibration resistance. Available in both single and 3 phase options. Rated for hazardous locations and harsh industrial environments UL listed Available in both single and 3 phase options Single phase: 0.05 kVA to 0.250 kVA Single Phase: (0.50 → 25 kVA), 3 Phase (3 → 45 kVA) Conduit knockouts for side entry into roomy wiring compartment Copper lead wire terminations 0.500 kVA → 10 kVA units are encapsulated with electrical grade silica sand and epoxy for industrial applications

The e2s A105NSONTEL Telephone initiated alarm sounder is a compact, high output, 105dB(A) has a choice of three alarm tone frequencies. Automatic synchronisation Continuously rated Dual M20 x 1.5 mm threaded cable entries Duplicate pluggable cable terminations Class A Ingress protection IP66 Type 4/4X/13/3R 64 alarm tone frequencies and 4 remotely activated alarm stages Available with custom tone configurations and frequencies Diode polarized for use in supervised circuit

CONN TERM BLK FEED THRU 8-24 AWG

3 Pole Contactors, DC Controlled Built-in coil suppression 3 N/O poles Auxiliary contact configuration one N/O, one N/C Operating time closing 12 to 22 ms Operating time opening 4 to 19 ms Note Contactors suffixed BL accept front mount auxiliary contact blocks but only the 2 contact version, they do not accept side mounted contacts. Approvals UL and CSA

The Chemtronics Techspray Isopropyl Alcohol (IPA) Wipes is use as flux removers (defluxers) remove flux residues and other contaminants left by manufacture, rework, or repair of printed circuit boards. It also removes residues from higher, lead free temperatures are more baked on and harder to clean. Techspray flux removers have been proven very effective at removing fluxes baked on at lead free temperatures. 99.8% pure IPA Ideal for electronics cleaning Plastic-safe Low linting & tear resistant

Low Smoke Halogen Free Single Core Cable - H07Z-K A flexible low smoke halogen free single core cable for internal wiring Intended for installation within conduits and trunking, as well as internal wiring within appliances and fittings Can be used in all areas where in an event of fire a protection of people and equipment is paramount Flame retardant in accordance to IEC 60332-1-2 Smoke density in accordance to IEC 61034 Halogen free in accordance to IEC 60754-1 Working voltage 450/750V Test Voltage 2500Vac Temperature range -15°C → +90°C

Screw Cap Choice of release caps Nylon body and cap, UL94-VO rated Low insertion resistance Protection: PC2 Approvals UL Panel Mounting CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

The Eurotherm SUBEPWR cables are configuration cable RJ11 for Epower. Configuration cable RJ11

Helagrip PVC Cable Markers On Reels Chevron cut PVC cable markers supplied on reels. The design of the marker allows it to be easily applied over a range of cable sizes. They are manufactured from flexible, high grade PVC which conforms to IEC 684-3. Ideally suited to panel building, mass transit, utilities, telecommunications, and electrical contracting. Features and Benefits • Easily apply one size marker to wide range of cables • Markers are applied pre-termination • Chevron cut to ensure markers lock together • Characters available are 0-9, A-Z, and standard electrical symbols

T Series

SIBA HBC Ceramic Cartridge Fuse Type gR SIBA cylindrical ultra-rapid fuses are available in six different sizes. They can be fitted with or without a built-in striker pin for fuse blown indication or operation of microswitches. High interrupting rating up to 300 kA Voltage rating AC 250 V to AC 1000 V Protection of Power Semiconductors according to IEC 60269-1 and -4 Available with integrated striker pin Classes according to IEC 60269-4 and DIN VDE 0636-40 Fuse-holder / fuse-clips and accessories are available Standards IEC 60269-4; DIN VDE 0636 Teil 40 and UL248-13 Approvals IEC 60269 - 4; DIN VDE 0636 Teil 40; UL 248 - 13

Mobrey Level Switch The Mobrey ultrasonic liquid level switch with polyphenylene sulphide construction has output type integral SPCO relay (energised when the sensor is wet) and 1-in BSPT dual mount thread. This switch is designed for high or low-level alarm duties to give a voltage-free contact or solid-state transistor output for alarm signalling or as part of a pump control system. It is intended for level detection at a fixed point when liquid fills the gap between the crystals. The supply voltage ranges between 18VAC/DC and 30VAC/DCNote:If the liquid to be monitored is flowing, the device should be fitted with the gap inline with the flow. In storage tanks, it should be fitted with the gap vertical unless the liquid is highly aerated when it should be angled.Features and Benefits Vessel pressure of 5bar (maximum)Wet switching level detection at a fixed point when liquid fills the gap between the crystalsSwitched voltage is 30VDC (maximum)Suitable for low maintenance applicationsHigh reliability with no moving partsNot easily subject to fouling and not affected by ambient light conditionsFitted with three metres of cableLightweightNo moving partsMounting types are horizontal and verticalApplications Low level alarms in header tanksPump control duty in feeder tanksHigh and low alarms in storage tanksLevel and pump control in storage tanksSmall or thin wall tanksBund level detectionSteering gear oilCertifications NEMA 6P (10ft.)/IP66/IP68 (3m)

Toggle Switches, Ultra-Min, Washable Vertical and two types of right angle terminations available Suitable for low level switching applications Totally sealed, suitable for immersion cleaning Wave solderable, will withstand 260°C for 5 seconds Gold plated brass terminals Brass actuator and PBT case Minimum load current: 10mA at 50mV - 10μA at 5Vdc Number of operations: 60000 (2 pos), 30000 (3 pos) Note For biased switches '(on)' refers to momentary 'on' position. Momentary function (spring-loaded return): The switch or contact breaker returns to its original position when the load is removed. E.g. bell push) Stay-put function : The switch or contact breaker remains (stop) in the new position after the load has been removed.

7A IDEAL DIODE WITH REVERSE INPU

RELAY GEN PURPOSE 3PDT 10A 220V

MOUNTING FOOT; CAN BE SNAPPED ON

RELAY TIME DELAY 60SEC 5A 250V

DOUBLE-DECK FUSE TERMINAL BLOCK;

HEATSHRK ITCSN ADH 3"X48" BLK