Discounted Products

VXD Pilot Operated VAlves SMC has improved upon their VXD range of Pilot operated diaphragm 2-port solenoid valves. The redesign has made these process valves lighter and more compact while still delivering the outstanding performance of the previous generations. The VXD solenoid valve now uses less energy than its predecessor and is quieter in operation with an improved response time. Features and Benefits •Improved durability •Reduced buzzing during operation •Reduced power consumption •Improved off response time with high viscosity fluids •Reduced impact noise during operation •Improved armature durability •Suitable for use with water, oil, heated water, high temperature oil and air •Normally open and normally closed Applications Ideal for use with air, water, oil, heated water and high temperature oil applications. SMC VX Series

T Series

Self Adhesive Vinyl Cloth Label Vinyl cloth label with strong acrylic adhesive can be used in different industries. The material is very soft and suitable for offset printing, screen printing, rotary printing, thermal transfer printing Excellent printability, conversion and application characteristics Length 38 mm Width 15 mm Very soft and excellent adhesion on cable and curved substrates Temperature range: -30 °C to +100 °C Excellent Resistance to Mild Acids; Alkalis; Most Common Petroleum Based Oils; Greases; Aliphatic Solvents APPLICATION: Used for decoration and instruction on Jewelry, Commodity, Cosmetic, Electronic, Medical diagnostic, Food trades, Stationery and Bags SHELF LIFE: Sealed in original packing, the product can be stored at 23 °C and 65% RH for at least one year

Low Smoke Halogen Free Single Core Cable - H07Z-K A flexible low smoke halogen free single core cable for internal wiring Intended for installation within conduits and trunking, as well as internal wiring within appliances and fittings Can be used in all areas where in an event of fire a protection of people and equipment is paramount Flame retardant in accordance to IEC 60332-1-2 Smoke density in accordance to IEC 61034 Halogen free in accordance to IEC 60754-1 Working voltage 450/750V Test Voltage 2500Vac Temperature range -15°C → +90°C

HOOK-UP STRND 18AWG RED 100'

Dryfit A500 Designed for ease of handling Nominal capacity range: 3.5 to 10Ah Battery completely maintenance free (electrolyte fixed in gel form) High energy density and very low gassing Short recharging time Long service life of 6 years (minimum) Shelf life: 2 years at 20°C Trouble-free transportation Operating temperature: -30 → 50 °C Note Stock no 200-1409 is fitted with DIN 72311 (vehicle battery type) tapered terminal posts. For suitable terminals see stock no. 509-7627 and range. Warning Do not charge in a sealed enclosure!

Standard rail, 35 x 7.5 mm, incl. fixing screws, for bottom mounting, GEOS 4050 (central position), Optional mounting with mounting holder at various heights possible

Climasys CC - electronic hygrotherm - 200…240 V - temp -40…80°C - Hr 20…80%

True RMS Measurement. Four digit resolution with auto-scaling. Displays Single phase Ampere readings. Field programmable CT primary and secondary.

Ferraz Shawmut - Mersen 1000Vdc Photovoltaic Fuses and Accessories Engineered to Protect in Photovoltaic Applications. Mersen offer a range of photovoltaic fuses and fuse holders that are designed specifically for this application. This range benefits from enhanced fuse construction which allow for continuous temperature and current cycling withstand.Protect your off-grid and grid tied PV systems using Mersen's Photovoltaic fuses. Applications: PV string/array level protection Combiner box applications In-Line PV module protection. Inverters Battery Charge Controllers. Low Fault current interrupting capability Durable Construction. Temperature cycle withstand capability. Guaranteed operation at temperature extremes. Note Modulostar Fuse holders recommendations. Do not Operate under load. The PV source must be connected to the upstream termina. Photovoltaic Fuses and Accessories

Progressive Bite Ring Progressive bite rings for use with Ermeto / Parker EO® hydraulic compression fittings and RS Pro hydraulic tube. Banjos, Bite Rings & Tube Nuts Ermeto Original or EO® progressive ring fittings, for metric tube, are manufactured from mild steel, with zinc plated and passivated finish. They are available in light duty and heavy duty series to cover a wide range of pressure ratings. Each fitting comes with a tube nut but the bite ring will need to be ordered separately. The progressive ring bite produces a keyed leak-free tube connection. The range of fittings is intended purely for the assembly of connections for fluid applications. All fittings are supplied with an instruction leaflet. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used. Operating temperature range without pressure reductions for the steel fitting material is -40°C to +120°C. Warning Hydraulic systems can work at high pressures. To ensure functional safety of EO® tube fittings, only EO® parts should be used in their assembly and the pressure and temperature ratings should not be exceeded.

Unex™ Hose Clips Unex™ Hose Clips products manufactured by Uniclip Ltd Hose Clips employ a double stainless steel band design which totally encircles the clamped tubing, providing evenly distributed clamping pressures able to seal up to 136 bar. Features and Benefits 11mm wide A2 grade stainless steel (304 S 15) band & CZ131 brass screw Corrosion resistant and suitable for use in laboratories, R&D facilities, dispensing & vending equipment and engine test areas Capable of sealing flexible hose onto thin-wall glass tube Available with either a large hexagon head for hand operation, or screwdriver slotted stud

Low Viscosity Epoxy Resin Compatible with reflow applications Hardener free from DDM or other aromatic amines Low viscosity Flame retardant Excellent adhesion to a wide variety of substrates Excellent thermal cycling characteristics Good flexibility Good chemical and water resistance Standards UL94 V-0 Standards UL94 V-0 Potting Compounds: Twin Packs The twin pack format enables 'mixing in the bag' of resin and hardener, preventing air entrapment and permitting ease of application without the need for direct operator contact, thereby reducing handling risk and mess. Each twin pack is supplied with full instructions for use. All packs are supplied with a desiccant for storage.

Label Remover (Electrolube) A solvent cleaner specially formulated for the quick and efficient removal of paper based porous pressure sensitive adhesive labels. Safe for use on most plastics.,Supplied in 200ml aerosol Warning Flammable Solvent Warning Flammable solvent

Expandable Sleeving Tool A choice of application tools for use with expandable sleeves. The fixed prong tool ( 548-243 ) is suitable for use with sleeves of diameter up to 2.0 mm, and the interchangeable prong tool ( 548-259 ) for sleeves of diameter up to 11.5 mm. The interchangeable prong tool is supplied with three sets of prongs (one set of type 1, 2 and 3 prongs) and an assembly aid.

Key Instruments Flow Meter The Key Instruments FR4500 series variable area flow meter measures the gas flow rate of 30L/min to 280L/min. It is a standard, precision-machined, acrylic, flow meter for liquids or gases. It also has direct reading air and water scales. The FR4500 flow meters can be configured with a control valve on the inlet or no valve at all. The O-rings are provided as Buna-N. Note: Mounting screws are required (available separately). Features and Benefits Pipe diameter range is 1/4 in Connection type is 1/4 NPT female Maximum operating pressure is 6.89bar Maximum operating temperature is 65°C It is use for long term trouble free operation Easy-to-read scales Threaded brass inserts for quick installation Easy disassembly and assembly for maintenance Durable, 1-piece, clear, acrylic construction Stable, easy-to-read float Superior quality Mounting inserts 10-32 UNF x 3/8in It has maximum pressure 100PSIG Applications Compatible with most gases and fluids

Fulleon CXM Fire Alarm Manual Call Points 377-1799

Thermally conductive oxime Fills gap between device and heatsink, reduces thermal resistance Can be used as a low bond strength adhesive, sealant or gasketing compond High viscosity, non-slump paste High thermal conductivity Good electrical insulation characteristics Remains flexible and elastic at high temperatures Good chemical resistance Wide operating temperature range DISPENSING GUN: A compatible dispensing gun is available which holds a 75ml syringe Note For application gun see stock number 725-9984 For the thermally conductive oxime see stock number 725-9975 Standards RoHS Compliant (2002/95/EC) Standards RoHS Compliant (2002/95/EC)

High Capacity Aluminium 1250 series high capacity single point load cell designed for direct mounting of large platforms. Has a humidity-resistant protective coating, assuring long term stability over the compensated temperature range. Output at rated load 2mV/V ±10% Input Impedence (Ω) 415 ±15Ω Output Impedence (Ω) 350 ±3Ω Insulation Resistence (Ω) >5 x 10 9 Excitation Voltage 10 Vdc Body material Anodised aluminium Environmental rating IP65 Mounting Direct, M8 tapped holes Operating temperature range -30 → +70°C Compensated temperature range -10 → +40°C Ultimate overload 300% rated load Cable Type 6-core polyurethane insulated, dual floating screen. 1m long

Fluke 1736 Power Logger (EU and US Version) The Fluke 1736 Three-Phase Power Logger built with Fluke Connect® mobile app and desktop software compatibility gives you the data you need to make critical power quality and energy decisions in real-time. The best test tool for conducting energy studies and basic power quality logging, the 1736 automatically captures and logs over 500 power quality parameters so you have more visibility into the data you need to optimize system reliability and savings. An optimized user interface, flexible current probes, and an intelligent measurement verification function that allows you to reduce measurement errors by digitally verifying and correcting common connection errors makes setup easier than ever and reduces measurement uncertainty. Access and share data remotely with your team via the Fluke Connect® app so you can maintain safer working distances and make critical decisions in real-time, reducing the need for protective equipment, site visits and check-ins. You can also quickly and easily chart and graph measurements to help identify issues and create detailed reports with the included Fluke Energy Analyze Plus software package. Features & Benefits • Colour LCD display: 4.3-inch active matrix TFT, 480 pixels x 272 pixels, resistive touch panel • Voltage range: up to 1000V • Current range: 4A to 6000A • Frequency: 42.5 to 69 Hz • Comprehensive logging • Power instrument directly from the measured circuit • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance and downstream • Interfaces: USB-A, WiFi, Bluetooth, USB-mini • Line cord: EU, US, UK • More visibility, reduced uncertainty and better power quality and energy consumption decisions Supplied with Fluke 1736, power supply, voltage test leads, alligator clips (4x), 12 in 1,500A flexible current probe (4x...

SIBA HBC Ceramic Cartridge Fuse Type gR SIBA cylindrical ultra-rapid fuses are available in six different sizes. They can be fitted with or without a built-in striker pin for fuse blown indication or operation of microswitches. High interrupting rating up to 300 kA Voltage rating AC 250 V to AC 1000 V Protection of Power Semiconductors according to IEC 60269-1 and -4 Available with integrated striker pin Classes according to IEC 60269-4 and DIN VDE 0636-40 Fuse-holder / fuse-clips and accessories are available Standards IEC 60269-4; DIN VDE 0636 Teil 40 and UL248-13 Approvals IEC 60269 - 4; DIN VDE 0636 Teil 40; UL 248 - 13

OSC XO 24.576MHZ CMOS SMD

HuskyLens Pro is an easy-to-use AI machine vision sensor with 6 built-in functions: face recognition, object tracking, object recognition, line following, color detection and tag detection. Through the UART / I2C port, HuskyLens can connect to Arduino, Raspberry Pi, or micro:bit to help you make very creative projects without playing with complex algorithms.

3M™ 4277+ Half Mask Reuseable Respirator Introducing 3M™ 4277+, this is a reusable half-mask respirator that provides lightweight, comfortable and effective protection against particles and vapours. Suitable for a broad range of industrial applications, the innovative comfort features help to ensure that the respirator is worn consistently over long periods. Design The 3M™ 4277+ respirator features integrated filters, which then enables the field of view to be undisturbed when being used. An adjustable head cradle helps fit a large variety of head sizes, with additional neck-straps for a more secure fitting. An exhalation valve that helps to direct exhaled breath and moisture downward to avoid fogging up glasses or face shields. Designed to work well with 3M Eyewear and Hearing Protection products. Protection Maintenance-free and ready to use with two large inhalation valves with permanently attached particulate filters. Delivering protection against organic particles and vapours. The 4277+ (FFABE1P3 R D) has protection against organic vapours and hazardous particles. Vapours up to 10 x Threshold Limit Value (TLV) or 1000 ppm, whichever is lower and 20 x TLV for particulates. Features and Benefits A ready-to-use half-mask respirator is designed for effective and comfortable protection against organic vapour and particulate hazards Respirators can be used until damaged, particulate filters clog, gas filters become saturated or after one month Exhalation valve centrally positioned for effective removal of heat and moisture Twin inhalation valves with large carbon filters Low profile design for better peripheral vision Adjustable head cradle and easy to fasten neck straps...