Products Found: 91

Showing Results For: Contactor & Control Relay Overloads

Contactor & Control Relay Overloads


FILTERS
Filters
Showing
1 -
Enrgtech #
Manufacturer Part No
Name
Availability
Price
Rating
Rohs Verified
ZB150-100, Eaton
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 269.63
Rohs Verified
ZB150-125, Eaton
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 305.92
Rohs Verified
DILA-22(24VDC), Eaton
8 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 58.63
Rohs Verified
DILER-40-G(24VDC), Eaton
8 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 57.83
Eaton
Rohs Verified
ZE-1,0, Eaton
3 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 59.92
Eaton
Rohs Verified
ZE-6, Eaton
3 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 59.92
Eaton
ZB65-24, Eaton
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 80.83
Eaton
Rohs Verified
ZE-1,6, Eaton
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 58.73
Eaton
Rohs Verified
ZE-2,4, Eaton
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 59.92
Rohs Verified
DILER-31-G(24VDC), Eaton
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 57.83
Eaton
Rohs Verified
ZE-9, Eaton
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 59.92
TF65-40, ABB
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 183.45
TF96-78, ABB
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 268.50
TF65-67, ABB
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 235.53
TF65-28, ABB
1 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 170.00
Rohs Verified
TA25DU0.63, ABB
2 In Stock
Check Stock & Lead Times Packaging Options
1 +
£ 125.00
Showing
1 -

New Items
New items
010223 | DILER-40-G(24VDC), Eaton

010223 | DILER-40-G(24VDC), Eaton

DILER Mini Contactor Relay a.c only or dc only operated coils 10A contact rating with protection Surface or DIN rail mounting 500V a.c./250V d.c. maximum rating voltage Dimensions HxWXD 58 x 45 x 52 mm
New items
278460 | ZB65-65, Eaton

278460 | ZB65-65, Eaton

ZB65 Overload Relays These are for use with DILM contactors DILM40 to DILM65 Fits below DILM 40 to DILM65 contactors Provides short circuit protection for motors When fitting overload relay remote from contactor, or using more than one overload relay, use remote mounting base (stock no. 513-0336 )
New items
RS_136-3667, Siemens

RS_136-3667, Siemens

Contactor Relays - 3RH2 Range Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil. Size S00 High degree if contact stability at low voltages & current Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks Note The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms). Standards IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1. Siemens Sirius Range Contactor & Control Relays Siemens control gear for feeders up to 5.5kW. The complementary nature of the devices allows fast and simple assembly, for example, of motor starters and reversers. A perfect match between contactors, overloads, circuit breakers and accessories for the same power ratings provides a uniform panel appearance and the standard widths with no side-by-side mounting derating allows for space saving.
New items
RS_136-3663, Siemens

RS_136-3663, Siemens

Contactor Relays - 3RH2 Range Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil. Size S00 High degree if contact stability at low voltages & current Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks Note The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms). Standards IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1. Siemens Sirius Range Contactor & Control Relays Siemens control gear for feeders up to 5.5kW. The complementary nature of the devices allows fast and simple assembly, for example, of motor starters and reversers. A perfect match between contactors, overloads, circuit breakers and accessories for the same power ratings provides a uniform panel appearance and the standard widths with no side-by-side mounting derating allows for space saving.
New items
051774 | DILER-22(110V50HZ,120V60HZ), Eaton

051774 | DILER-22(110V50HZ,120V60HZ), Eaton

DILER Mini Contactor Relay a.c only or dc only operated coils 10A contact rating with protection Surface or DIN rail mounting 500V a.c./250V d.c. maximum rating voltage Dimensions HxWXD 58 x 45 x 52 mm
New items
276364 | DILA-31(230V50HZ,240V60HZ), Eaton

276364 | DILA-31(230V50HZ,240V60HZ), Eaton

DILA Contactor Relay Current Rating 4A AC15 Note DILA -22 Contactor relay cannot be used with 4-pole auxiliary contact module.
New items
RS_136-3662, Siemens

RS_136-3662, Siemens

Contactor Relays - 3RH2 Range Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil. Size S00 High degree if contact stability at low voltages & current Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks Note The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms). Standards IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1. Siemens Sirius Range Contactor & Control Relays Siemens control gear for feeders up to 5.5kW. The complementary nature of the devices allows fast and simple assembly, for example, of motor starters and reversers. A perfect match between contactors, overloads, circuit breakers and accessories for the same power ratings provides a uniform panel appearance and the standard widths with no side-by-side mounting derating allows for space saving.
New items
DILER-40-G(24VDC), Eaton

DILER-40-G(24VDC), Eaton

DILER Mini Contactor Relay a.c only or dc only operated coils 10A contact rating with protection Surface or DIN rail mounting 500V a.c./250V d.c. maximum rating voltage Dimensions HxWXD 58 x 45 x 52 mm
New items
TF96-78, ABB

TF96-78, ABB

TF65 and TF96 Thermal Overload Relays Thermal overload relays are protection devices used mainly to protect motors against overload and phase failures. Overload protection – trip class 10 Rated temperature from -25 … +60 °C Adjustable current setting for overload protection Automatic or manual reset selectable Suitable for three and single-phase application Status indication STOP and TEST function
New items
278454 | ZB32-32, Eaton

278454 | ZB32-32, Eaton

ZB Overload Relays Protects the motor against phase failure or overload Short circuit protection when fitted directly to a contact Suitable for protection of Atex motors Single phase sensitivity to IEC/EN 60947 When fitting overload relay remote from contactor or using more than one overload relay, use remote mounting base (stock no. 493-0488 - ZB32 only) Note ZB12 have 5 pins, ZB32 have 4 pins.
New items
RS_136-3674, Siemens

RS_136-3674, Siemens

Contactor Relays - 3RH2 Range Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil. Size S00 High degree if contact stability at low voltages & current Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks Note The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms). Standards IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1. Siemens Sirius Range Contactor & Control Relays Siemens control gear for feeders up to 5.5kW. The complementary nature of the devices allows fast and simple assembly, for example, of motor starters and reversers. A perfect match between contactors, overloads, circuit breakers and accessories for the same power ratings provides a uniform panel appearance and the standard widths with no side-by-side mounting derating allows for space saving.
New items
278447 | ZB32-1,6, Eaton

278447 | ZB32-1,6, Eaton

ZB Overload Relays Protects the motor against phase failure or overload Short circuit protection when fitted directly to a contact Suitable for protection of Atex motors Single phase sensitivity to IEC/EN 60947 When fitting overload relay remote from contactor or using more than one overload relay, use remote mounting base (stock no. 493-0488 - ZB32 only) Note ZB12 have 5 pins, ZB32 have 4 pins.
FAQs
We offer free shipping for orders over £200 if delivery is in the UK. All other orders in the UK, shipping from £7.99 depending on the weight and measurement. Mainland Europe shipping charges start from £25. For all other countries shipping charges start from £50 for products like Contactor & Control Relay Overloads and all others.
You can email us directly at sales@enrgtech.co.uk or via our website for any queries regarding Contactor & Control Relay Overloads or any other product.
This depends on the Contactor & Control Relay Overloads individual product and information that can be found on our website.
Yes, we offer special discounts on orders above £200 for Contactor & Control Relay Overloads and all other products.
UK orders normally take between 2/3 working days. International orders normally take between 3/5 working days for all products including Contactor & Control Relay Overloads.
Yes. We keep updating our stock frequently and if a product like Contactor & Control Relay Overloads is not in stock then we will let you know.