Safety IO Modules

New items

772132, Pilz

PNOZmulti 2 Communication/Fieldbus Module Profibus The PNOZ m ES Profibus expansion module connects to a base unit from the PNOZmulti 2 configurable control system. Features and Benefits Can be configured in the PNOZmulti Configurator Connection for PROFIBUSDP Station addresses from 0 ... 99, selected via rotary switch Status indicators for communication with PROFIBUSDP and for errors In the PNOZmulti Configurator, 128 virtual outputs of the PNOZmulti 2 control system can be defined for communication with the fieldbus PROFIBUSDP Maximum 1 PNOZ m ES Profibus can be connected to the base unit Transmission rate: maximum 12 Mbps Connection to fieldbus via female 9-pin D-Sub connector Approvals CE, cULus Listed, TÜV, BG, CCC. Supplied with Screw terminals. Safety Controller

Product Detail

New items

3SK1211-1BB40, Siemens

SIRIUS 3SK1 Expansion Module The 3SK1 output expansion units are used to expand the enabling circuits. The maximum Performance Level PL / Cat. in accordance with ISO 13849-1, SILCL in accordance with IEC 62061, SIL in accordance with IEC 61508 corresponds to the Performance Level PL and SIL of the basic unit when the connection between basic unit and output expansion is configured as fail safe (e.g. basic unit and output expansion are connected using 3ZY12 device connector ). The output expansions can be activated via the supply voltage (A1/A2) or using 3ZY device connectors.The operating state of the 3SK1 output expansions is displayed on the LED. The output expansions 3SK1211(4RO) have four safety related enabling circuits as NO circuits, and the output expansions 3SK1213 (3RO) have three. They each have one positively driven NC circuit. The output expansions can be activated via any enabling circuit / output of the basic unit via (A1). The NC circuit 51/52 of 3SK1211 (4RO) or 41/42 of 3SK1213 (3RO) is used for monitoring the output expansions. In the 24 V DC variants, the expansion units can be activated and evaluated via the 3ZY device connectors.Output expansion 3SK1211 Slide switch for selecting the activation type (time delayed / instantaneous - for 24 Vdc variant only)1 LED for status display4 enabling circuits (safe circuits, NO contacts)1 NC circuit as feedback contact for output expansion 3SK1211 to the up-circuit basic unitEnclosure width 22.5 mmRemovable terminalsOutput expansion 3SK1213 Slide switch for selecting the activation type (time delayed / instantaneous - for 24 Vdc variant only)1 LED for status display3 enabling circuits (safe circuits, NO contacts)1 NC circuit as feedback contact for output expansion 3SK1213 for the up-circuit basic unitEnclosure width 90 mmRemovable terminalsNote ...

Product Detail

New items

NX-SOH200, Omron

Omron NX Standalone Safety Controller The NX series safety control units offer simple and flexible design for high-speed, high-precision motion control and safety control in an integrated engineering environment when used in conjunction with the NJ series machine automation controller and the automation software Sysmac Studio. This functionality contributes to productivity improvements and assurance of safety conforming to international standards and rules. Integrated safety into machine automation possible by connecting with the NX-series EtherCAT Coupler The Safety CPU Unit controls up to 128 Safety I/O Units 4 or 8 points per Safety Input Unit, the 4-point Safety Input Unit can be directly connected with OMRON Non-contact Switches and Single beam Sensors 2 or 4 points per Safety Output Unit, the 2-point Safety Output Unit is characterized by large output breaking current of 2.0 A The Safety Units can be freely allocated in any combination with standard NX I/O Compliant with IEC61131-3 Safety programs can be standardized and reused efficiently by using POUs for design and operation EN ISO13849-1 (PLe/Safety Category4), IEC 61508 (SIL3) certified One connection using Safety over EtherCAT (FSoE) protocol enables flexible configuration by mixing the Safety Units with standard NX I/O Hardware and safety circuits can be configured using the Sysmac Studio (Ver. 1.07) Safety Controller

Product Detail

New items

PDM-IOP-4CC-IOP, Schmersal

Input expander / PDM For parallel IO devices Passive distribution module for series-wiring Cage clamps For up to 4 safety switchgears Fuse protected device ports For installation in terminal boxes Protection class IP00

Product Detail

New items

R1.190.1060.0, Wieland

The Wieland samosPRO IO-module has 8 non-safe inputs, 4 non-safe outputs and 4 configurable nonsafe I/O. It has pluggable push-in terminals. Spring clamp type connection available Inputs and outputs are configurable It has short circuit protection

Product Detail

New items

NX-EIC202, Omron

Omron NX-EIC EtherNet/IP Coupler Unit The EtherNet/IP Coupler Unit is the link between the EtherNet/IP multi-vendor network and the NX-series I/O Units and Safety Units. With wide variety of the I/O Units and Safety Units, the NX-series is the perfect match for the CJ-series and multi-vendor controllers. Up to 63 NX-IO Units can be connected to one EtherNet/IP Coupler Unit Standard and high-performance units can be mixed Each Coupler plus its I/O form just a single EtherCAT node on the network I/O control and safety control can be integrated by connecting Units for safety The IP address can be found on the label on the Unit, without using software Slave configuration by Sysmac Studio can be done centrally via the controller, or on-the-spot using the Coupler's built-in USB port Input per Coupler Unit: Maximum 504 bytes, Output per Coupler Unit: Maximum 504 bytes Safety Controller

Product Detail

New items

SMS31, Carlo Gavazzi

The Carlo Gavazzi safety modules are designed in Category 4, performance Level e in accordance with the Machine Directive EN ISO 13849-1 to monitor and control safely the safety circuits in applications with emergency stops, safety gates, safety magnetic switches, safety limit switches and electromechanical interlocks. They are also used to control safely the safety circuits of the lift car levelling and the lift pit inspection, in compliance with the lifts standards EN81-20 and EN81-50. Multiple types inputs Machinery directive compliance. Cat. 4, PL e in accordance with EN ISO 13849-1 Lift directive compliance- EN81-20 and EN81-50 standards Multiple operating modes Electromechanical forcibly guided safety relays with 3NO+1NC Flexible wiring- Diagnostic- LED indications for power supply

Product Detail

New items

LG5925.48/61 AC/DC24V, Dold

LG 5925 - Emergency stop module, LG 5929 - Expansion module Applications Emergency stop and expansion modules for - Machine emergency stop switching - Monitoring sliding grill guards General data Safety category 4 in accordance with EN954-1 Operating status indicator 22.5 mm overall width Emergency stop module LG 5925.48 1 or 2-channel configuration Line termination recognition on the ON button with or without crossover recognition Expansion module LG 5929.60 Use only with a higher-level emergency stop module Redundant and force guided contacts 1-channel configuration Input Emergency stop module Expansion module Nom. voltage: 230 VAC or 24 VAC / DC 230 VAC or 24 VAC / DC Control voltage: 22 VDC at S11 with U N - Control current: 25 mA with U N 75 mA Output Contact assignment: 3 N/O / 1 N/C 5 N/O / 1 N/C Therm. current I th : 5 A max. 5 A max. Switching capability according to AC 15: - N/O: 3 A / 230 VAC - N/O: 3 A / 230 VAC - N/C: 2 A / 230 VAC - N/C: 2 A / 230 VAC Mechanical lifespan: >20 x 10 6 switching cycles >20 x 10 6 switching cycles General data Rated operating current type: Continuous operation Continuous operation Mounting: DIN rail DIN rail Housing material: Thermoplast Thermoplast Protection class: - Housing: IP40 - Housing: IP40 - Terminals: IP20 - Terminals: IP20 Dimensions (H x W x D): 22.5 x 90 x 121 mm 22.5 x 90 x 121 mm Weight: 220 g 205 g Ambient temperature: -15 °C → +55 °C -15 °C → +55 °C Approvals CE Standards EN 60204-1 (stop functions), EN 418, prEN574, prEN 954-1, IEC / EN 60204-01, EN 954-1

Product Detail

New items

2TLA010030R0000 E1T 0s 24DC, ABB

E1T Safety Expansion Relay Series By using the E1T safety expansion relay from ABB it is easy to increase the number of safe outputs. This means that an unlimited number of dangerous machine operations and functions can be stopped from one safety relay. The E1T from ABB is a safety expansion relay series which incorporates twin stop functions Includes LED status indication 35 mm DIN rail mounting IP40 protection rated enclosure and IP20 rated connection blocks Impulse withstand voltage of 2.5kV Has four normally open outputs (4NO)

Product Detail

New items

280007, IDEM

IDEM SEU-31-i VIPER Expansion Unit Professional range of IDEM VIPER Safety Relays with pluggable and screw terminals. The safety relays incorporate expansion units. The relays can be directly wired to increase the number of safety output contacts. Designed to meet the latest safety standard and offer enhanced LED diagnostics and simplified wiring. Typical applications include safety interlock switches and emergency e-stop devices door guard monitoring. The expansion units are designed to be used with any SCR base units. Multiple SEU expansion units can be used together. Expansion unit for SCR base units LED status indicator 22.5 mm DIN Rail mount

Product Detail

New items

FX0-GENT00000, Sick

Overview At a glance Your Benefit Safe EFI-pro system is the result of the consistent development of the successful EFI interface and enables intelligent safeguarding of AGVs, robots and other challenging applications. The industrial Ethernet-based EFI-pro network technology enables the quick exchange and transmission of safe and non-safe data throughout all levels of communication. The central component is the EFI-pro gateway. It ensures safe and fast integration of innovative sensor solutions from SICK as well as direct integration of robot controls into the Flexi Soft safety controller via EtherNet/IPTM CIP SafetyTM. The Safe EFI-pro system is therefore a crucial enabler for implementing Industry 4.0. Applications Perfect interaction in the safety system: Optimal connectivity of safety sensors, safety controllers and actuators connected via Ethernet/IPTM CIP SafetyTM Fast, intuitive commissioning: Safety Designer for the configuration of SICK system components and clever connectivity Safe productivity: Combination of safe motion monitoring, simultaneous protective field monitoring and extended network integration Optimized processes: Extensive diagnostic options via Safety Designer and device data via Ethernet from the field level into the cloud Safe investment: Future-proof industrial Ethernet technologyIndustrial Ethernet-based, safe network technology Configuration via Safety Designer Safe integration of up to 6 safety laser scanners Safe integration of robot controls via Ethernet/IPTM CIP SafetyTM Safe, integrated movement monitoring Simultaneous monitoring of up to 48 protective fields Note Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.

Product Detail

New items