Strain Gauges

New items

MMF404326, Micro-Measurements

The Micro Measurements range consists of linear strain gauge with copper solder tabs, designed to measure the strain and force of an item. These are specifically suited for water-exposure applications. Based on the CEA Series with Option P2 pre-attached cables, W2A strain gauges are fully enclosed with a silicone rubber coating and tested to 1 meter water depth, 30 minutes duration. Strain gauges are suitable for measurement of both static and dynamic applications Reliable, trustworthy reading Clear alignment marks

Product Detail

New items

1042-0030-F000-RS, Tedea Huntleigh

Low Profile Aluminium Compensated Temperature Range -10 to +40°C Output Impedance 350 +/- 3Ω Termination Type: Cable Ultimate Overload: 300% of Rated Load 1042 series low profile single point load cell designed for direct mounting of low cost weighing platforms. Has a humidity resistant protective coating, which assures long term stability over the entire compensated temperature range. Dimensions: 20 x 40 x 150mm (1 to 30kg); 25.2 x 40 x 150mm (50 to 100kg) For Output signal conditioners see (stock no. 455-5043 ) Cable Type Cable Length (m) Input Impedence (Ω) Insulation Resistence (Ω) Excitation Voltage (V) IP Rating Mounting Operating Temp Range (°C) 6 Wire; PVC Single Floating Screen 1 415 +/- 15 >2 x 10 9 10 ac/dc IP66 Direct, M6 holes -30 to +70 415 +/- 15 >2 x 10 9 10 ac/dc IP66 Direct, M6 holes -30 to +70

Product Detail

New items

1042-0003-F000-RS, Tedea Huntleigh

Low Profile Aluminium Compensated Temperature Range -10 to +40°C Output Impedance 350 +/- 3Ω Termination Type: Cable Ultimate Overload: 300% of Rated Load 1042 series low profile single point load cell designed for direct mounting of low cost weighing platforms. Has a humidity resistant protective coating, which assures long term stability over the entire compensated temperature range. Dimensions: 20 x 40 x 150mm (1 to 30kg); 25.2 x 40 x 150mm (50 to 100kg) For Output signal conditioners see (stock no. 455-5043 ) Cable Type Cable Length (m) Input Impedence (Ω) Insulation Resistence (Ω) Excitation Voltage (V) IP Rating Mounting Operating Temp Range (°C) 6 Wire; PVC Single Floating Screen 1 415 +/- 15 >2 x 10 9 10 ac/dc IP66 Direct, M6 holes -30 to +70 415 +/- 15 >2 x 10 9 10 ac/dc IP66 Direct, M6 holes -30 to +70

Product Detail

New items

7MH5105-4AD00, Siemens

The Siemens Siwarex WL 250 series of Load Cell ST-S SA rated load is 1t and accuracy class C3. It has a 6m cable length and 4 conductor. Material Stainless steel Degree of protection IP67

Product Detail

New items

7MH5120-1AQ00, Siemens

The Siemens Siwarex WL 260 series of load cell SP-S AE rated load is 1 kg and accuracy class is 0.015% not legal for trade. It has a 40 cm connecting cable and 4 conductors. Material: Aluminum Enclosure rating IP65

Product Detail

New items

FX292X-100A-0010-L, TE Connectivity

The TE Connectivity FX29 series 50 Newtons compact compression load cell that offers exceptional price-to-performance in a robust sensor package. It is used in medical infusion pumps, analog and digital scales, power tools and robotics. Low power consumption Compact design Amplified analog outputs High over range capability

Product Detail

New items

060-2443-07, Honeywell

Honeywell Model 13 Subminature Load Cells The Honeywell Model 13 Sub-miniature Load Cell is designed to measure load ranges with complete accuracy from 150 g to 1000, these units are easily incorporated into systems which have limited space. Model 13 combines high frequency and low deflection to achieve a combined non-linearity and hysteresis of 0.25%  0.5% full scale. A small circuit board is included in the load Cells lead wire cable for temperature compensation, which is recommended not to remove.

Product Detail

New items

7MH5106-2AD00, Siemens

Product Detail

New items

0616-0500-F000-RS, Tedea Huntleigh

"S" Beam Type 200/300kg Output impendence 350Ω Input Impedance 400 ±20Ω Safe overload 150% rated capacity Ultimate overload 300% rated capacity The additional sense wires compensate for changes in lead resistance due to temperature changes and/or cable extension. For use in tension and compression 6 wire (sense) circuit Bridge signal conditioners available separately For Output signal conditioners see (stock no. 455-5043 ) Dimensions 62 x 80 x 18mm Applications: Include Force measurement, material testing machines, conversion of mechanical scales to electronic, hanging scales, hoppers Cable Type Cable Length (m) Insulation Resistance (Ω) Excitation Voltage (V) Compensated Temperature Range (°C) IP Rating Operating Temperature Range (°C) 6 Conductors; 26 AWG; Braid Shield; PVC Jacket 3 >2 x 10 9 10 ac/dc -10 to +45 IP67 -30 to +70

Product Detail

New items

MM120-001632, Micro-Measurements

The Micro Measurements range consists of Multi Data Acquisition Device, which is a single-channel, USB-powered measurement device for use with resistive strain gauges. Internal bridge completion supports quarter, half, and full bridge configurations. This device is designed for use in applications where a convenient, low-cost, easy-to-use strain gage measurement is required. It is ideal for classroom environments or gage installation verification. Intuitive, user-friendly software Time stamped recorded data No calibration is needed Powered via the USB interface

Product Detail

New items

MMF403930, Micro-Measurements

The Micro Measurements range consists of linear strain gauge with copper solder tabs, designed to measure the strain and force of an item. These are specifically suited for water-exposure applications. Based on the CEA Series with Option P2 pre-attached cables, W2A strain gauges are fully enclosed with a silicone rubber coating and tested to 1 meter water depth, 30 minutes duration. Strain gauges are suitable for measurement of both static and dynamic applications Reliable, trustworthy reading Clear alignment marks

Product Detail

New items

7MH5113-3DD00, Siemens

The Siemens Siwarex WL 280 series of load cell RN-S SA rated load is 130kg and accuracy class C3 according to OIML R60. It has a 3 m cable length and 4 Wires. Material: Stainless steel Degree of protection IP68

Product Detail

New Items

MMF404326, Micro-Measurements

1042-0030-F000-RS, Tedea Huntleigh

1042-0003-F000-RS, Tedea Huntleigh

7MH5105-4AD00, Siemens

7MH5120-1AQ00, Siemens

FX292X-100A-0010-L, TE Connectivity

060-2443-07, Honeywell

7MH5106-2AD00, Siemens

0616-0500-F000-RS, Tedea Huntleigh

MM120-001632, Micro-Measurements

MMF403930, Micro-Measurements

7MH5113-3DD00, Siemens

FAQs