Beacons

New items

SO/B/SW/3C, Fulleon

Xenon Beacons - Solex The wide operating voltage, increased efficiency and automatic synchronisation of the Solex xenon beacons make them a universal solution for many types of alarm/monitoring systems. The base lock and tamper switch make these xenon beacons ideal for security applications. Wide operating voltage up to 60Vdc Automatic synchronisation Constant performance over voltage range Base lock - beacon can be secured to base Tamper switch for security applications Approvals VdS Supplied with Lens, shallow base Approvals VDS approved Warning This product exceeds the requirements of En54-3 but is not designed to meet EN54-23. Where the Construction Product Directive or Regulation (CPD/CPR) is a country requirement, it cannot be used, legally, for the purpose of alerting room occupants to a Fire Alarm condition. For Countries where CPD/CPR does not apply, this note should be disregarded.

Product Detail

New items

8WD53205DD, Siemens

Integrated signal lamp, rotating light, with integrated LED, yellow, 24 V AC/DC, Diameter 70 mm

Product Detail

New items

SOLM/R/R/D, Eaton Fulleon

LED Beacons - Solista Maxi An enhancement of the standard Solista. This LED beacon has an economy and a performance mode. In economy mode it can require as little as 3mA, or it can be switched to attain much higher light outputs where visibility is the greater concern. For even greater effectiveness a double flash sequence can be selected. 3 user selectable output settings Wide operating voltage range Synchronisation flash Single or double flash Lockable bases

Product Detail

New items

SOL-LX-W/RF/R1/D, Fulleon

Fulleon Solista LX Wall Beacon The Solista LX Wall beacon is suitable for a variety of applications, available in a red or white body and compatible with the full range of 6 bases. The beacon has a patented lens design which distributes light to achieve the required illumination specified by EN 54-23 , whilst using minimum current consumption. Certified to EN 54-23 LED technology for long life and low current consumption Up to 7.5m coverage volume (switchable to 2.5m) 0.5 or 1Hz flash rate (switch to 0.5Hz to reduce current consumption) IP65 protection White or Red Standards EN 54-23.

Product Detail

New items

PSB-0009, Klaxon

LED Fire Alarm Beacons IP65 rated Red or amber lens with red base Shallow or deep base option EN54 compliant at 24V and 48V Note Deep version has wiring on the same side of panel or wall whereas the shallow version mouns directly on panel, wiring through panel.

Product Detail

New items

X500-22RS, Moflash

X500 Series Extra High Output High output 24 joule beacons for distance signalling 'UV' stable domes and bases Flash rate easily selected by switch located on PCB 360° visibility Note Lens must be ordered separately (typical stock no. 286-9003 ) If the 24Vdc unit (stock number 405-5111 ) is used with a battery power source, rather than the recommended D.C. supply as stated in the catalogue then you will need to use the bi-lateral current limiter which is supplied with the unit. If a bi-lateral current limiter is not used in this instance then the unit will cease to function.

Product Detail

New items

855PB-B24SE722, Allen Bradley

855PB Static / Flashing LED 22.5mm panel mount Static or Flashing selectable IP65 rating

Product Detail

New items

21550104055, Pfannenberg

Pfannenberg PYRA Flashing Beacons, PY X-M-05 The PYRA PY X-M-05 is a flashing xenon beacon that can be used for many applications and is safe and simple to mount. Pyramid style PC/ABS blend housing with PC lens Safe - an incorrect installation is virtually impossible Easy - significantly shorter assembly and installation times Economical - largest possible signaling range due to effective Xenon technology Installation options with external lugs or internal holes Choice of four different flash rates via DIP switch Suitable for panel mounting Electronic constant current regulation at 24 V ac/dc devices to avoid load fluctuations Integrated inrush current limitation and undervoltage detection Providing full synchronization on multi-flashing light systems Visual covering distance of 11 m IK08 Impact-proof housing IP66 protection according to EN 60529 5J flash 10 year warranty Note Only stock nos. 846-3553 and 846-3557 comply with EN 54-23. Approvals GL (UL, GOST, VdS, EN 54-23 pending).

Product Detail

New items

FF98SF-DCRS, Moflash

Flashing Filament Automotive Beacon Magnetic base or permanent Fix Internal dioptric lens to enhance visual light by 20% 'UV' Stable polycarbonate domes Note Lens and bulb must be ordered separately. Conforms to Civil Aviation Authority 'CAP 168' requirements for vehicle obstruction lights when fitted with amber lens stock no. 286-9025 Note Conforms to Civil Aviation Authority 'CAP 168' requirements for vehicle obstruction lights when fitted with amber lens stock no. 286-9025 (lens must be ordered separately)

Product Detail

New items

QBS-0028, Klaxon

Standard Ultra Bright LED All are of polycarbonate construction. Flash rate (where applicable) on all types is 1Hz. Operating voltages (ac) are ± 10%. Current consumption variable depending on operating voltage. Rated to IP65 (unless stated). Operating temperature range: -20 → 40°C Suitable for continuous or flashing operation (where applicable) Uses 8 high-reliability ultra-bright LEDs Zero power consumption when connected in reverse polarity - useful for fire alarm applications

Product Detail

New items

LED100-05-04, Moflash

Moflash Industrial ECO LED Beacons - LED100 Series The LED100 economy series is suitable for light commercial & industrial signalling applications where local indication is required. These beacons have two selectable stages of alarm, flashing or continuous (static) mode, selectable by a jumper link on the PCB. The design also allows for a third wire connection giving flexibility to switch from a pre-set static mode to flashing. The ECO LED beacons have been designed predominantly to offer a cost effective solution against more traditional incandescent types of lamps, whether through new plant and machinery installations or existing facility upgrades. The design allows for termination inside the enclosure through the base. Dual function, flashing or continuous (static) mode Continuously rated LED long life Low current consumption Suitable for surface, conduit box or wall mounting Optional wall bracket & guard available 2 point fixing 360° light output around the vertical axis Dustproof and weatherproof UV stable polycarbonate lens UV stable ABS plastic base 160 flashes per minute (FPM) IP65 protection RoHS compliant CE marked

Product Detail

New items

LED80-02-04, Moflash

Moflash Dual Function LED Beacon - LED80 Series 12 extra-bright LED's Continuously-rated UV-stable polycarbonate lens and body Wide operating voltage 180° visibility Easy, snap-fit installation (with base plate for surface mounbt option) May be used in genaral signalling applications

Product Detail

New Items

SO/B/SW/3C, Fulleon

8WD53205DD, Siemens

SOLM/R/R/D, Eaton Fulleon

SOL-LX-W/RF/R1/D, Fulleon

PSB-0009, Klaxon

X500-22RS, Moflash

855PB-B24SE722, Allen Bradley

21550104055, Pfannenberg

FF98SF-DCRS, Moflash

QBS-0028, Klaxon

LED100-05-04, Moflash

LED80-02-04, Moflash

FAQs