Wire Ducts, Raceways

New items

164-11008, HellermannTyton

Flexible Cable Bundling Supports HTC The Heladuct cable and wiring bundling supports are the ideal system for consolidating and mounting lines in control cabinets, switchgears and vehicles. The wires or cable harnesses can be routed in and out and branched over the entire length of the support. The cable bundling supports are available in four standard sizes. They can be mounted with screws or an adhesive strip. Approvals for screw types: UL Approved E76160, Det Norske Veritas Type External Ø Number of wires for cable diameter Max. strain on a length of 500 mm / 70 °C 0.75 mm² 1.5 mm² 2.5 mm² HTC10 9 x 11 mm 9 6 4 100 g HTC20 20 mm 32 22 14 300 g HTC30 30 mm 67 50 34 650 g HTC40 40 mm - 81 60 1100 g All dimensions in mm Material: Polypropylene Colour: Ivory Operating temperature: -20 → +70 °C Delivery length: 500 mm All dimensions in mm

Product Detail

New items

183-24040, HellermannTyton

HelaDuct HTWD-HF wiring ducts are used to route and protect wires in control panels and switching systems where there are high demands on personal or material safety in case of ﬁre, such as in public transport, tunnels, data-processing centers or public buildings. Excellent ﬁre-safety characteristics Narrow slots suitable for small-diameter wires Smooth, burr-free edges protect installers from injury and wires from damage Fingers can be removed with no sharp edges at pre-notched snap-off Points Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges Duct covers hold securely even in a vertical position and under vibration Cover is ﬂush with side of duct, allowing for tight, contiguous placement of duct Base perforation according to DIN EN 50085

Product Detail

New items

164-31008, HellermannTyton

Flexible Cable Bundling Supports HTC The Heladuct cable and wiring bundling supports are the ideal system for consolidating and mounting lines in control cabinets, switchgears and vehicles. The wires or cable harnesses can be routed in and out and branched over the entire length of the support. The cable bundling supports are available in four standard sizes. They can be mounted with screws or an adhesive strip. Approvals for screw types: UL Approved E76160, Det Norske Veritas Type External Ø Number of wires for cable diameter Max. strain on a length of 500 mm / 70 °C 0.75 mm² 1.5 mm² 2.5 mm² HTC10 9 x 11 mm 9 6 4 100 g HTC20 20 mm 32 22 14 300 g HTC30 30 mm 67 50 34 650 g HTC40 40 mm - 81 60 1100 g All dimensions in mm Material: Polypropylene Colour: Ivory Operating temperature: -20 → +70 °C Delivery length: 500 mm All dimensions in mm

Product Detail

New items

164-41108, HellermannTyton

Flexible Cable Bundling Supports HTC The Heladuct cable and wiring bundling supports are the ideal system for consolidating and mounting lines in control cabinets, switchgears and vehicles. The wires or cable harnesses can be routed in and out and branched over the entire length of the support. The cable bundling supports are available in four standard sizes. They can be mounted with screws or an adhesive strip. Approvals for screw types: UL Approved E76160, Det Norske Veritas Type External Ø Number of wires for cable diameter Max. strain on a length of 500 mm / 70 °C 0.75 mm² 1.5 mm² 2.5 mm² HTC10 9 x 11 mm 9 6 4 100 g HTC20 20 mm 32 22 14 300 g HTC30 30 mm 67 50 34 650 g HTC40 40 mm - 81 60 1100 g All dimensions in mm Material: Polypropylene Colour: Ivory Operating temperature: -20 → +70 °C Delivery length: 500 mm All dimensions in mm

Product Detail

New items

164-11108, HellermannTyton

Flexible Cable Bundling Supports HTC The Heladuct cable and wiring bundling supports are the ideal system for consolidating and mounting lines in control cabinets, switchgears and vehicles. The wires or cable harnesses can be routed in and out and branched over the entire length of the support. The cable bundling supports are available in four standard sizes. They can be mounted with screws or an adhesive strip. Approvals for screw types: UL Approved E76160, Det Norske Veritas Type External Ø Number of wires for cable diameter Max. strain on a length of 500 mm / 70 °C 0.75 mm² 1.5 mm² 2.5 mm² HTC10 9 x 11 mm 9 6 4 100 g HTC20 20 mm 32 22 14 300 g HTC30 30 mm 67 50 34 650 g HTC40 40 mm - 81 60 1100 g All dimensions in mm Material: Polypropylene Colour: Ivory Operating temperature: -20 → +70 °C Delivery length: 500 mm All dimensions in mm

Product Detail

New items

164-21108, HellermannTyton

Flexible Cable Bundling Supports HTC The Heladuct cable and wiring bundling supports are the ideal system for consolidating and mounting lines in control cabinets, switchgears and vehicles. The wires or cable harnesses can be routed in and out and branched over the entire length of the support. The cable bundling supports are available in four standard sizes. They can be mounted with screws or an adhesive strip. Approvals for screw types: UL Approved E76160, Det Norske Veritas Type External Ø Number of wires for cable diameter Max. strain on a length of 500 mm / 70 °C 0.75 mm² 1.5 mm² 2.5 mm² HTC10 9 x 11 mm 9 6 4 100 g HTC20 20 mm 32 22 14 300 g HTC30 30 mm 67 50 34 650 g HTC40 40 mm - 81 60 1100 g All dimensions in mm Material: Polypropylene Colour: Ivory Operating temperature: -20 → +70 °C Delivery length: 500 mm All dimensions in mm

Product Detail

New items

183-28080, HellermannTyton

HelaDuct HTWD-HF wiring ducts are used to route and protect wires in control panels and switching systems where there are high demands on personal or material safety in case of ﬁre, such as in public transport, tunnels, data-processing centers or public buildings. Excellent ﬁre-safety characteristics Narrow slots suitable for small-diameter wires Smooth, burr-free edges protect installers from injury and wires from damage Fingers can be removed with no sharp edges at pre-notched snap-off Points Further pre-notched snap-off point at base of sidewall allow cutting out and removing sections of sidewall with no sharp edges Duct covers hold securely even in a vertical position and under vibration Cover is ﬂush with side of duct, allowing for tight, contiguous placement of duct Base perforation according to DIN EN 50085

Product Detail

New items

164-31108, HellermannTyton

Flexible Cable Bundling Supports HTC The Heladuct cable and wiring bundling supports are the ideal system for consolidating and mounting lines in control cabinets, switchgears and vehicles. The wires or cable harnesses can be routed in and out and branched over the entire length of the support. The cable bundling supports are available in four standard sizes. They can be mounted with screws or an adhesive strip. Approvals for screw types: UL Approved E76160, Det Norske Veritas Type External Ø Number of wires for cable diameter Max. strain on a length of 500 mm / 70 °C 0.75 mm² 1.5 mm² 2.5 mm² HTC10 9 x 11 mm 9 6 4 100 g HTC20 20 mm 32 22 14 300 g HTC30 30 mm 67 50 34 650 g HTC40 40 mm - 81 60 1100 g All dimensions in mm Material: Polypropylene Colour: Ivory Operating temperature: -20 → +70 °C Delivery length: 500 mm All dimensions in mm

Product Detail

New items

164-21008, HellermannTyton

Flexible Cable Bundling Supports HTC The Heladuct cable and wiring bundling supports are the ideal system for consolidating and mounting lines in control cabinets, switchgears and vehicles. The wires or cable harnesses can be routed in and out and branched over the entire length of the support. The cable bundling supports are available in four standard sizes. They can be mounted with screws or an adhesive strip. Approvals for screw types: UL Approved E76160, Det Norske Veritas Type External Ø Number of wires for cable diameter Max. strain on a length of 500 mm / 70 °C 0.75 mm² 1.5 mm² 2.5 mm² HTC10 9 x 11 mm 9 6 4 100 g HTC20 20 mm 32 22 14 300 g HTC30 30 mm 67 50 34 650 g HTC40 40 mm - 81 60 1100 g All dimensions in mm Material: Polypropylene Colour: Ivory Operating temperature: -20 → +70 °C Delivery length: 500 mm All dimensions in mm

Product Detail

New items

164-41008, HellermannTyton

Flexible Cable Bundling Supports HTC The Heladuct cable and wiring bundling supports are the ideal system for consolidating and mounting lines in control cabinets, switchgears and vehicles. The wires or cable harnesses can be routed in and out and branched over the entire length of the support. The cable bundling supports are available in four standard sizes. They can be mounted with screws or an adhesive strip. Approvals for screw types: UL Approved E76160, Det Norske Veritas Type External Ø Number of wires for cable diameter Max. strain on a length of 500 mm / 70 °C 0.75 mm² 1.5 mm² 2.5 mm² HTC10 9 x 11 mm 9 6 4 100 g HTC20 20 mm 32 22 14 300 g HTC30 30 mm 67 50 34 650 g HTC40 40 mm - 81 60 1100 g All dimensions in mm Material: Polypropylene Colour: Ivory Operating temperature: -20 → +70 °C Delivery length: 500 mm All dimensions in mm

Product Detail

New Items

164-11008, HellermannTyton

183-24040, HellermannTyton

164-31008, HellermannTyton

164-41108, HellermannTyton

164-11108, HellermannTyton

164-21108, HellermannTyton

183-28080, HellermannTyton

164-31108, HellermannTyton

164-21008, HellermannTyton

164-41008, HellermannTyton

FAQs