D Shaped Connectors | D Sub Connectors

New items

61030010018, HARTING

D-SUB HOOD 37P W/4-40 THUMBSCREW

New items

D-Sub Connector Kits with 90 deg Metal Hoods These Kits of MH Connectors D-Sub MHDCMR9 Series have 90° Die Cast Zinc nickel plated backshells with either Pin or Socket connectors. The mating part of the contacts in these D-Sub MHDCMR9 Series Kits are Gold plated with the Solder Bucket terminations being Tin plated. Stock numbers 787-3849 and 787-3842 have stamped contacts. Stock numbers 787-3846 and 787-3855 have machined contacts. The Kits comprise of: 2 Backshell halves 1 short 4-40 UNC slotted jack screw 1 long 4-40 UNC slotted jack screw 3 Housing screws A two piece plastic Ferrule kit for 4, 5, 7 and 9 mm diameter cable D-Sub Connector Kits - MH A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.

Product Detail

New items

MHDTPK15-DB15S-K, MH Connectors

D-Sub Connector Kits with Straight Metalized Plastic Hoods These Kits of MH Connectors D-Sub MHDTPK Series are Straight 180° ABS Polylac Nickel plated backshells with either Pin or Socket connectors. The mating part of the stamped and formed contacts in the MHDBxSx Series connectors are Gold plated with the Solder Bucket terminations being Tin plated. The Kits comprise of: Plug or Socket Connector with Solder Buckets 2 Backshell halves 2 4-40 Thumbscrews 2 Housing screws and 2 nuts 1 Set of non-metalized compression inserts for 4, 5, 7 and 9 mm diameter cable ( Note maximum cable diameter is 13 mm) Approvals UL 94 V-0 recognized D-Sub Connector Kits - MH A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.

Product Detail

New items

MHDTZK15-BK-RA-PC-BK-K, MH Connectors

Top and 45° Entry Diecast Backshells 2 piece diecast zinc backshells with plastic strain relief inserts and earth connection Nickel plate finish. Meets VDE0781 and FCC207 shielding regs Attenuation; >40dB (30MHz to 1GHz) Accepts 3.5mm to 13mm cable

Product Detail

New items

MHDPPK15-DB15S-K, MH Connectors

D-Sub Connector Kits with Straight Polyamide PA66 Plastic Hoods and Metal Strain Relief Clamp These Kits of MH Connectors D-Sub MHDPPK-SLIM Series are straight 180° PA66 backshells with either Pin or Socket connectors. The mating part of the contacts in these D-Sub MHDPPK-SLIM Series Kits are Gold plated with the Solder Bucket terminations being Tin plated. The MHDPPK-SLIM Series backshells have a Quick-Lock system that can be re-opened and are suitable for any common D-Sub connector. Cable with upto 11.5 mm outside diameter can be accommodated by the MHDPPK-SLIM Series backshell. The Kits comprise of: Plug or Socket Connector with Solder Buckets 2 Backshell halves 2 4-40 Thumbscrews 1 Plastic Strain Relief 1 Metal Strain Relief Clamp with screws Note Maximum cable diameter for the 9 way is 8 mm. Maximum cable diameter for the 15 and 25 way is 11.5 mm. Approvals Polyamide PA66-UL recognised material D-Sub Connector Kits - MH A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.

Product Detail

New items

MHD45PK25-DB25S-K, MH Connectors

D-Sub Connector Kits with Angled Metalized Plastic Hoods These Kits of MH Connectors D-Sub MHD45PK Series are 45° angled ABS Nickel plated backshells with either Pin or Socket connectors. The mating part of the stamped contacts in these D-Sub MHD45PK Series Kits are Gold plated with the Solder Bucket terminations being Tin plated. The Kits comprise of: Plug or Socket Connector with Solder Buckets 2 Backshell halves 2 4-40 Thumbscrews (except the 9 way which only has one on the none cable entry side) 2 Housing screws and 2 nuts 1 Set of compression inserts for 4, 5, 7 and 9 mm diameter cable ( Note maximum cable diameter is 13 mm) Approvals ABS polylac-UL recognised nickel plated D-Sub Connector Kits - MH A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.

Product Detail

New items

MHDM25-K, MH Connectors

MHulti Hood System Die-cast Zinc A range of Die-Cast Zinc Hoods from the MH MHulti Hood System from MH Connectors. Manufactures Part Numbers: MHDM have a Metallised Grommet Kit and Clamp included. MHDM35 are 35° entry with a Metallised Grommet Kit and Clamp included. MHEE have a Metallised Cone and Clamp included. 2-piece diecast hoods offering exceptional RFI/EMI shielding Designed for quick and easy assembly of cable to hood - the cable is held in place whilst the rest of the assembly is completed Metallised plastic bushing inserts or cones provide for a maximum 360° shielding at the critical cable entry points Simple removal of the inserts allow for rework or maintenance Note The cable entry capacity for these hoods is 13mm, this is the largest jacket diameter which the hood will accept. The inserts take cables from 4 to 10mm diameter, this will be measured over the screening. Supplied with Jackscrews and three sizes of metallised plastic cable bushing inserts or a Cone.

Product Detail

New items

MHDSSK-P-9-L-K, MH Connectors

Plastic Top/Side Entry Hoods Dual entry 'snap together' black plastic D Connector Hoods Quick snap together action - no screws needed to hold hood together Suitable for any common D-sub Connector Manufactured in Polyamide UL recognised material and includes a metal strain relief Accepts cable diameters 3.5mm to 11.5mm max Note Owing to its physical size the 9 way (stock number 425-7840) is only fitted with one jack screw

Product Detail

New items

MHDTPPK9-DB9P-K, MH Connectors

D-Sub Connector Kits with Straight ABS Polylac Plastic Hoods These Kits of MH Connectors D-Sub MHDTPPK Series are straight 180° ABS Polylac plastic backshells with either Pin or Socket connectors. The mating part of the stamped and formed contacts in the D-Sub connector DBxSx Series are Gold plated with the Solder Bucket terminations being Tin plated. The Kits comprise of: Plug or Socket Connector with Solder Buckets 2 Backshell halves 2 4-40 Thumbscrews 2 Housing screws and 2 nuts 1 Set of compression inserts for 4, 5, 7 and 9 mm diameter cable ( Note maximum cable diameter is 13 mm) Approvals UL 94 V-0 recognised D-Sub Connector Kits - MH A range of D-sub Kits which contain a connector, hood and associated screws and cable glands or clamps as specified.

Product Detail

New items

MHDM35-25-K, MH Connectors

MHulti Hood System Die-cast Zinc A range of Die-Cast Zinc Hoods from the MH MHulti Hood System from MH Connectors. Manufactures Part Numbers: MHDM have a Metallised Grommet Kit and Clamp included. MHDM35 are 35° entry with a Metallised Grommet Kit and Clamp included. MHEE have a Metallised Cone and Clamp included. 2-piece diecast hoods offering exceptional RFI/EMI shielding Designed for quick and easy assembly of cable to hood - the cable is held in place whilst the rest of the assembly is completed Metallised plastic bushing inserts or cones provide for a maximum 360° shielding at the critical cable entry points Simple removal of the inserts allow for rework or maintenance Note The cable entry capacity for these hoods is 13mm, this is the largest jacket diameter which the hood will accept. The inserts take cables from 4 to 10mm diameter, this will be measured over the screening. Supplied with Jackscrews and three sizes of metallised plastic cable bushing inserts or a Cone.

Product Detail

New items