Automotive Connector Accessories

New items

W2S-P012, Deutsch

DT Plug Wedges From Deutsch, this DT Series Wedge receptacle is designed to correspond with DT plugs to provide enhanced retention. V4DT Range A range of 2 to 12way, 13A rated sealed connectors.,Available in standard inline, flanged receptacle and boot adaptor options (enables fitting of standard heatshrink tubing).,Each connector requires a secondary wedgelock for maximum contact retention.,Uses Deutsch Size 16 solid contacts (stock no. 425-761),Receptacles use male Pins, Plugs use sockets Sealed to IP67 Durable – 100 mating cycles minimum Vibration poof – 20g's at 10 - 2000Hz Corrosion Resistant – 48hours Salt Spray to MIL STD 1344

Product Detail

New items

1-174360-1, TE Connectivity

TE Connectivity Econoseal J Mark II (+) Series Connector Accessories A range of accessories for the Econoseal J Mark II (+) series automotive wire connectors TE Connectivity Econoseal Connector System Designed to meet the exacting requirements of the automotive industry, for a reliable sealed connector. All connectors are designed to be used with thin walled non-irradiated PVC cables Though designed initially for automotive applications, Econoseal III can be used in any industry where a reliable sealed connector is needed

Product Detail

New items

WM12S, Deutsch

DT Series Connector Wedge Locks Also known as TPA (Terminal Postiion Assurance,) these DT Series connector wedge locks are fitted inside the connector prior to mating and offer a locking mechanism to prevent accidental disconnection of the mated connectors. Deutsch DT Series Connectors Deutsch DT series connectors are ideally suited for applications that require a secure reliable connector in harsh environments such as under-the-hood, transmission tunnels and many others areas that require secure connections in both power and signal.

Product Detail

New items

DT044P-CE09, Deutsch

DT Receptacles Complete with Boot Adaptor The boot adaptor will accept boots/sleeves or shrink tubing with a wire insulation diameter of 1.35mm Approvals IP67 V4DT Range A range of 2 to 12way, 13A rated sealed connectors.,Available in standard inline, flanged receptacle and boot adaptor options (enables fitting of standard heatshrink tubing).,Each connector requires a secondary wedgelock for maximum contact retention.,Uses Deutsch Size 16 solid contacts (stock no. 425-761),Receptacles use male Pins, Plugs use sockets Sealed to IP67 Durable – 100 mating cycles minimum Vibration poof – 20g's at 10 - 2000Hz Corrosion Resistant – 48hours Salt Spray to MIL STD 1344

Product Detail

New items

DT063S-E008, Deutsch

DT Series 3-Pin Connector Housing with Shrink Boot Adapter From Deutsch, the DT Series connector housings have rugged thermoplastic housing with integrated locking, and are field proven. The 3 pin connectors combine with size 16 DT Series contacts to provide 3-Wire CAN applications in controller area networks. The in line connector housings feature a shrink boot adapter, and are ideal for automotive applications. Features and Benefits Wire to Wire Applications IP68 Integrated Locking Operating Temperature of -55°C to +125°C PA GF Body material Available in this Range Stock No. 883-7052 is a grey 3-pin receptacle with shrink boot adapter Stock No. 883-7055 is a black 3-pin receptacle with shrink boot adapter Stock No. 883-7068 is a grey 3-pin plug with shrink boot adapter Deutsch DT Series Connectors Deutsch DT series connectors are ideally suited for applications that require a secure reliable connector in harsh environments such as under-the-hood, transmission tunnels and many others areas that require secure connections in both power and signal.

Product Detail

New items

12160437, Delphi

Delphi Metri-Pack OBD II On-Board Diagnostic Connectors Metri-Pack 150 OBD II On-Board diagnostic automotive connectors designed for under dash applications. These Metri-Pack 150 OBD II On-Board diagnostic automotive connectors are designed to meet SAE J1962 specifications using ISO standard male terminals. The Male test equipment automotive connector ( 801-0991 ) has a nylon insulator with ISO standard copper alloy male terminals. Please see table for details of crimp terminals and accessories Additional Data Stock Number Manufacturer Part Number Mating Connector Secondary Lock (TPA) Crimp Terminals Other Accessories 801-0982 12110250 801-0991 801-0985 801-1008 , 801-1001 801-0989 (cover) 801-0998 15317575 801-0985 801-1008 , 801-1001 801-0989 (cover) 801-0991 12110252 801-0982 801-0884 , 801-0888 801-0989 (cover), 801-0995 (clip) Delphi Metri-Pack OBD II Series - On-Board Diagnostic Connection System

Product Detail

New items

12034145, Delphi

Delphi Metri-Pack 280 Secondary Locks (TPA) for Automotive Connectors A range of secondary locks, Terminal Position Assurance (TPA) for Metri-Pack 280 series sealed automotive connectors. Delphi Metri-Pack 280 Series Automotive Connectors

Product Detail

New items

1027-004-1200, Deutsch

DT Series Mounting Clips From Deutsch, a range of mounting clips for DT series connectors. Available in this Range: Stock No: 883-7065 is a side mount clip for use with 12W 2,3,4 and 6 Pole DT, TM and DTP connectors Stock No: 883-7074 is straight mount lip for 8W DT connectors Stock No: 883-7077 is a mount clip for 12W 2,3,4 and 6 Pole DT, DTM and DTP connectors Stock No: 883-7071 is a grey mount clip for 12W 2,3,4 and 6 pole DT, DTM and DTP connectors Stock No: 883-7080 is a black mount clip for 12W 2,3,4 and 6 pole DT, DTM and DTP connectors Stock No: 883-7083 is a grey straight mount clip for 8W DT connectors Deutsch DT Series Connectors Deutsch DT series connectors are ideally suited for applications that require a secure reliable connector in harsh environments such as under-the-hood, transmission tunnels and many others areas that require secure connections in both power and signal.

Product Detail

New items

12186353, Delphi

Delphi 150 280 480 630 and Weather-Pack Attachment Clips This range of mounting clips and retaining clips are suitable for the Delphi Metri-Pack 150,280,480 and 630 series of automotive connectors.The clips are of press fit design and are made of Nylon.The retaining clip is made from carbon steel. Delphi Attachment and Bracket Clips

Product Detail

New items

DT064S-CE05, Deutsch

Deutsch DT Series Connector with End Cap From Deutsch, these DT Series connector plugs and receptacles are designed for cable to cable automotive applications within the engine compartment, chassis or cab. These harsh environment connectors provide reliability and excellent performance where even a small degree of connector contact degradation is critical. For suitable contacts see 425-761 and range for suitable crimp tool see 425-973 and for sealing grommets size 16 see 425-430 Features and Benefits: Tactile and audible connector mating Rugged thermoplastic connector housing Hand insertable/removable contacts Operating temperature range -55 → +125 °C Dielecric withstand voltage 1500 Vac Nickel plated copper alloy contacts Positive contact retention Suitable for size 16 contacts Deutsch DT Series Connectors Deutsch DT series connectors are ideally suited for applications that require a secure reliable connector in harsh environments such as under-the-hood, transmission tunnels and many others areas that require secure connections in both power and signal.

Product Detail

New items

776164-1, TE Connectivity

TE Connectivity AMPSEAL Plug Style Receptacle Housings AMPSEAL automotive plug style receptacle housings with an IP67 rating, a 4mm centerline and mechanical and coloured keying. These AMPSEAL receptacle housings have a 2 piece contact holding design and secondary locking to prevent contact backout and accept a wire size of 0.5 to 1.25mm 2. Plug connector two-piece contact holding design ensures positive seating without backout TE Connectivity AMPSEAL AMPSEAL connectors are known for their rugged reliability even under high-temperature automotive and industrial applications. These heavy-duty connectors are not only waterproof, but submersible as well due to the two-way sealing of interface and wires.

Product Detail

New items

316372-6, TE Connectivity

TE Connectivity 2.5 mm MULTILOCK 040 Series Automotive Connectors MULTILOCK 040 Series automotive connectors designed for use as I/O connectors in automotive applications. These MULTILOCK 040 series have a compact design with high density 2.5 mm contact centres and are also durable and easy to handle. The housings of these MULTILOCK 040 automotive connectors protect the contacts against damage caused by rocking action (KOJIRI Action) that occurs at the mating and unmating stages. The MULTILOCK 040 plug and receptacle housings have a housing lance design enabling lanceless contacts to be used. The use of lanceless contacts avoids tangling and lance deformation is eliminated. The key feature of these MULTILOCK 040 connectors is the locking mechanism. The standard MULTILOCK 040 plug and receptacle housings feature an integral double lock mechanism to ensure a secure contact retention. The MULTILOCK 040 Mk II plug housing has a locking mechanism consisting of a 2 piece double lock plate for secure contact retention and prevention of partial insertion. The MULTILOCK 040 range of automotive connectors consists of plug and receptacle housings and PCB headers for use in wire to wire and wire to board applications. The plug housings require female crimp contacts, the receptacle housings require male tab contacts. Crimp contacts must be ordered separately. Features and Benefits Compact, durable design High density 2.5 mm pitch Housing lance design Contacts protected against damage caused by 'KOJIRI' Action Integral double locking system Applications The MULTILOCK 040 series of automotive connectors are designed for use in a range of automotive applications. These applications include powertrain systems, safety and security systems, convenience, driver information and body and chassis systems. TE Connectivity MULTILOCK Connectors and Contacts ...

Product Detail

New Items

W2S-P012, Deutsch

1-174360-1, TE Connectivity

WM12S, Deutsch

DT044P-CE09, Deutsch

DT063S-E008, Deutsch

12160437, Delphi

12034145, Delphi

1027-004-1200, Deutsch

12186353, Delphi

DT064S-CE05, Deutsch

776164-1, TE Connectivity

316372-6, TE Connectivity

FAQs