Hydraulic Check Valves

New items

ZRE-AB01-D1, Parker

CETOP 03 Pilot Operated Check Valve A pilot operated sandwich design check valve from Parker Hannifin for use with CETOP 03 stackable hydraulic flow valves. The outlet flow is blocked while inlet flow is free. Pressure at the inlet line opens teh check valve and allows flow at the outlet. Throttle check is available on port A or B and A + B configurations (See manufacturers part number). Features and Benefits Mountable in any position High flow capacity DIN 24340 A06/ ISO 4401 / NFPA D03 Mounting interface 1.2 bar opening pressure Pilot opening ratio (pilot to main) 1:6 MTTF 150 years Applications Suitable for general and industrial hydraulic applications and machine tooling. Check Valves These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.

Product Detail

New items

2303, Parker

Steel Check Valves Designed to allow flow in one direction and shut-off in the reverse direction. Nylon seals Note Not suitable for use with water.

Product Detail

New items

R900347495, Bosch Rexroth

Check Valves These CETOP mounting flow control check valves are designed to start and stop the flow of hydraulic fluid. Suitable for use with mineral oil (HL, HLP) to DIN 51524 and fluid types from 2.8 to 500 mm²/s viscosity.

Product Detail

New items

2302, Parker

Steel Check Valves Designed to allow flow in one direction and shut-off in the reverse direction. Nylon seals Note Not suitable for use with water.

Product Detail

New items

R900481624, Bosch Rexroth

Double Throttle Check Valve - Size 6 For vertical stacking assemblies to CETOP 3 size 6 Installed between the directional valve and subplate Mounting pattern to DIN 24 340 form A6 Note These valves can only be used with subplates and manifolds. Flow Control Valves A range of CETOP mounting flow control valves for limiting the flow of hydraulic fluid to actuators. They operate using mineral oils (HL, HLP) to DIN 51 524 with a viscosity range of 10 to 800mm²/s.

Product Detail

New items

2304, Parker

Steel Check Valves Designed to allow flow in one direction and shut-off in the reverse direction. Nylon seals Note Not suitable for use with water.

Product Detail

New items

EW06LCF, Parker

Adjustable Elbow with Swivel Nut Integral nitrile rubber O ring within the adjustable swivel nut forms seal when used with standard fitting bodies with a 24° cone Metric Tube Fittings – Elbows & Tees Ermeto Original or EO® progressive ring fittings, for metric tube, are manufactured from mild steel, with zinc plated and passivated finish. They are available in light duty and heavy duty series to cover a wide range of pressure ratings. Each fitting comes with a tube nut but the bite ring will need to be ordered separately. The progressive ring bite produces a keyed leak-free tube connection. The range of fittings is intended purely for the assembly of connections for fluid applications. All fittings are supplied with an instruction leaflet. For steel fittings it is recommended that seamless drawn steel tubes to DIN 2391/C are used. Operating temperature range without pressure reductions for the steel fitting materials is -40°C to +120°C. Warning hydraulic systems can work at high pressures. To ensure functional safety of EO® tube fittings, only EO® parts should be used in their assembly and the pressure and temperature ratings should not be exceeded.

Product Detail

New items

2305, Parker

Steel Check Valves Designed to allow flow in one direction and shut-off in the reverse direction. Nylon seals Note Not suitable for use with water.

Product Detail

New items

2301, Parker

Steel Check Valves Designed to allow flow in one direction and shut-off in the reverse direction. Nylon seals Note Not suitable for use with water.

Product Detail

New items

RHDIR3/8CF, Parker

BSP Non-Return Valves Non return check valves that can be used in various applications up to a pressure of 400 bar and have a cracking pressure of 1 bar. Manufactured from zinc plated steel and use poppet check valve that is damped to provide controlled and smooth opening. Features and Benefits Proven reliability Sealing achieved by using 90° cone Shock absorbing and muffled opening Nitrile seals BSP Parallel threaded female connection Applications Parker RHD non return valves are suitable for general hydraulic applications in a variety of industry sectors including, Automotive, Energy, Environment, Industrial, Oil and Gas, Power Generation, Process, Transportation and Water.

Product Detail

New items

RHDI1/4CF, Parker

BSP Non-Return Valves Non return check valves that can be used in various applications up to a pressure of 400 bar and have a cracking pressure of 1 bar. Manufactured from zinc plated steel and use poppet check valve that is damped to provide controlled and smooth opening. Features and Benefits Proven reliability Sealing achieved by using 90° cone Shock absorbing and muffled opening Nitrile seals BSP Parallel threaded female connection Applications Parker RHD non return valves are suitable for general hydraulic applications in a variety of industry sectors including, Automotive, Energy, Environment, Industrial, Oil and Gas, Power Generation, Process, Transportation and Water.

Product Detail

New Items

ZRE-AB01-D1, Parker

2303, Parker

R900347495, Bosch Rexroth

2302, Parker

R900481624, Bosch Rexroth

2304, Parker

EW06LCF, Parker

2305, Parker

2301, Parker

RHDIR3/8CF, Parker

RHDI1/4CF, Parker

FAQs