CAN Interface Ics With Exceptional Quality Available Online With Speedy Delivery

New items

COM20022I3V-HT, Microchip

COM20019i/20020i/20022i ARCNET Controllers ARCNET Communications - Microchip

Product Detail

New items

COM20020I-DZD, Microchip

Serial I/O Peripherals, Microchip I/O Peripherals - Microchip

Product Detail

New items

MCP2551 CAN Transceivers The Microchip MCP2551 is a high-speed CAN Transceiver that can operate at speeds of up to 1 Mbps. Serving as an interface between a CAN Controller and the physical bus, the MCP2551 provides differential transmit and receive capability and is fully compatible with ISO 11898. The MCP2551 is suitable for both 12 V and 24 V systems. Features Supports 1 Mbps operation Slope control input Implements ISO 11898 physical layer requirements Suitable for 12 V and 24 V systems Externally controlled slope for reduced RFI emissions Permanent dominant detect Low-current standby operation High noise immunity due to differential bus implementation CAN Bus Communication - Microchip

Product Detail

New items

MCP2551-E/P, Microchip

Microchip Technology CAN Transceiver The Microchip technology 1 channel, 1Mbit/s CAN transceiver has 8 pins and PDIP package type. This device is a high speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The Local Interconnect Network (LIN) bus supports communication in automotive networks. Features and Benefits An unpowered node or brown out event will not disturb the CAN bus Automatic thermal shutdown protection Detection of ground fault (permanent dominant) on TXD input Externally controlled slope for reduced RFI emission High noise immunity due to differential bus implementation Implements ISO-11898 standard physical layer requirements Low current stand by operation O extended (E):-400C to 1250C O industrial (I):-400C to 850C Power on reset and voltage brown out protection Protection against damage due to short circuit conditions (positive or negative battery voltage) Protection against high voltage transients Suitable for 12V and 24V systems Temperature ranges Up to 112 nodes can be connected

Product Detail

New items

MAX33015EATB+, Maxim Integrated

The Maxim Integrated CAN Transceiver has +5V control area network (CAN) transceivers with integrated protection for industrial applications. These devices have extended ±65V fault protection on the CAN bus for equipment where overvoltage protection is required. The CAN family also incorporates high ±45kV ESD HBM protection and an input common-mode range (CMR) of ±25V, exceeding the ISO11898 specification of -2V to +7V, and well suited for applications where ground planes from different systems are shifting relative to each other. It has 10-pin TDFN-EP package. This devices operates over the -40°C to +125°C temperature range. Integrated protection increases robustness 1.62V to 5.5V logic-supply (VL) range (MAX33014E and MAX33015E) Silent mode S disables transmitter Fault detection and reporting Operating temperature range of -40°C to +125°C Package type 10 TDFN

Product Detail

New items

TLE95613QXXUMA1, Infineon

The Infineon TLE9561-3QX is a multifunctional system IC with integrated power supply, communication interfaces, multiple half-bridges and support features in an exposed pad PG-VQFN-48 power package. The device is designed for various motor control automotive applications. To support these applications, the BLDC Motor System IC provides the main functions, such as a 5V low dropout voltage regulator one HS-CAN transceiver supporting CAN FD, CAN Partial Networking , three half-bridges for BDLC motor control, one current sense amplifier and one 32 bit serial peripheral interface (SPI). Very low quiescent current consumption in Stop Mode and Sleep Mode Periodic cyclic sense and cyclic wake in Normal Mode, Stop Mode and Sleep Mode Reset and interrupt output Drain-source monitoring and open-load detection Configurable time-out and window watchdog Over temperature and short circuit protection features

Product Detail

New items

MCP2551T-E/SN, Microchip

MCP2551 CAN Transceivers The Microchip MCP2551 is a high-speed CAN Transceiver that can operate at speeds of up to 1 Mbps. Serving as an interface between a CAN Controller and the physical bus, the MCP2551 provides differential transmit and receive capability and is fully compatible with ISO 11898. The MCP2551 is suitable for both 12 V and 24 V systems. Features Supports 1 Mbps operation Slope control input Implements ISO 11898 physical layer requirements Suitable for 12 V and 24 V systems Externally controlled slope for reduced RFI emissions Permanent dominant detect Low-current standby operation High noise immunity due to differential bus implementation CAN Bus Communication - Microchip

Product Detail

New items

MCP2561-E/P, Microchip

MCP2561/2562 CAN Transceivers CAN Bus Communication - Microchip

Product Detail

New items

NCV7356D1R2G, onsemi

CAN Controllers, ON Semiconductor A range of Controller Area Network (CAN) protocol controllers and transceivers from ON Semiconductor. The transceivers provide differential transmit capability to the bus and differential receive capability to the CAN controller.

Product Detail

New items

TJA1051T,112, NXP

CAN Controllers, NXP CAN Bus (Controller Area Network) Communication Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also used in other areas. CAN transceivers allow protocol layer CAN controllers to access the physical layer bus.

Product Detail

New items

MCP2515T-I/SO, Microchip

The MCP2515 is a second generation stand-alone CAN controller. It is pin and function compatible with the MCP2510 and also includes upgraded features like faster throughput, databyte filtering, and support for time-triggered protocols. 18-pin package Simple SPI interface to any MCU One-shot mode ensures message transmission is attempted only once Databyte filtering Start-of-Frame (SOF) output Low-power CMOS Technology

Product Detail

New items