Oscilloscope Probe Accessories

New items

045, Red Pitaya

Sensor Extension Module for STEMLAB Sensor extension module is an add-on board that can be plugged in on top of the STEMlab board to broaden its uses and capabilities. When STEMlab is used together with this sensor extension module the user is also able to connect many sensors and actuators that enables out of the box functionality. You can measure temperature, moisture, alcohol, water level, vibrations, UV light, sound, pressure, air quality detect motion. Also you can control things like LEDs, displays, motors, relays that are able to control high load devices. The sensor extension module is ideal for both newcomers to help them learn how to program and for developers to manufacture their new ideas quickly. Contents Sensor extension module (1pc), Jupyter programming

Product Detail

New items

TA090, Pico Technology

Pico Sprung Hook Probes, 1000 V CAT III, Black / Red These probes feature a shrouded 4 mm socket allowing connection to a measurement instrument using a 4 mm "banana" plug test lead. The sprung hook opens up to 10 mm to hold items such as components, IC legs or small conductors. Features Length: 121 mm Height: 23 mm Hook Limit: 10 mm IEC 1010 Rating: 1000 V CAT III 20 A Colour: Black (RS 136-5326 ); Red (RS 136-5327 ) Pico PC Based Instruments

Product Detail

New items

20030-2, Testec

Special accessories for sensing heads Description Stock no. Flexible sensing head adapter on 4 mm connector 437-6569 Clamping hook, screw-on 437-6553 Ground spring for HF applications 437-6575 Micro IC clip with lead for attaching to probe tip (red) 437-6014 Micro IC clip with lead for connecting to sensing head earth (yellow) 437-6020 Micro IC clip double set (red, black) 437-6036 Replacement probe tips (double set) 375-4520 Passive Oscilloscope Probes Note All the products in this range are supplied for use with instruments with a permanent earth connection.

Product Detail

New items

237-BNC-TRX, Tektronix

Keithley Male BNC to 3-lug Female Triax Adapter 237-BNC-TRX Keithley male BNC to 3-lug female triax adapter 237-BNC-TRX terminates triax cable in a BNC plug. It has a high voltage rating for use with Keithley 237 High Voltage SMU, 7072-HV High Voltage Semiconductor Matrix Card, 6517A Electrometer/High Resistance Meter and 7078-TRX cable. Keithley Accessories

Product Detail

New items

PQ218, Pico Technology

The Pico Technology probe positioning system for the PicoScope 6000 series holds the printed circuit board (PCB) during soldering, inspection and test, and includes probe holders for 2.5 mm oscilloscope probes. 4 magnetic 2.5 mm oscilloscope probe holder Cable holders, supplied in channel identification colours A to D and E to H

Product Detail

New items

RT-ZA21, Rohde & Schwarz

RT-ZA21 Extended Accessory Set for RT-ZI10 / 11 Probes Extended set for probes: RT-ZI10/RT-ZI11 (RS 125-9487 and 125-9488 respectively). Rohde & Schwarz Scope Rider Handheld Digital Oscilloscope System

Product Detail

New items

RT-ZA22, Rohde & Schwarz

RT-ZA22 Safety Test Leads, Red and Black Safety test leads for use with the ScopeRider RTH1002 and RTH1004 handheld digital oscilloscopes (RS 125-9462 and 125-9463 respectively).

Product Detail

New items

P01102154Z, Chauvin Arnoux

Chauvin Arnoux Test Probes The removable test probes can be changed to suit the application and the measurement conditions.

Product Detail

New items

AS400, Fluke

ScopeMeter 190 Series II Accessories See Industrial ScopeMeter 190 Series II, e.g. RS 716-7387 & 716-7396 Suitable cables for the Oscilloscope Probe Software ( RS 716-7434 ) can be found at RS 493-5540 & 205-738

Product Detail

New items

L210, Fluke

Your request could not be completed at this time

Product Detail

New items

TCPA300, Tektronix

Tektronix TCPA300 Amplifier The Tektronix TCPA300 amplifier is designed for use with the Tektronix TCP312 (30A) or TCP305 (50A) current probe. These probe/amplifier combinations offer a wide current measurement capability, from low-level milliamp measurements to high current levels. The TCPA300 can also be used with non-TEKPROBE systems to make proper current measurements, by multiplying the measured output voltage on the oscilloscope by the TCPA300 range setting. Note Requires Tektronix TCP305 ( 628-7534 ) or TCP312 ( 499-592 ) current probe, available separately. Supplied with Instruction/service manual, TEKPROBE interface cable, Male-to-Male BNC cable (50Ω), 50Ω feedthrough termination, Certificate of Traceable Calibration Note Requires Tektronix TCP305 ( 628-7534 ) or TCP312 ( 499-592 ) current probe, available separately. Supplied with Instruction/service manual, TEKPROBE interface cable, Male-to-Male BNC cable (50Ω), 50Ω feedthrough termination, Certificate of Traceable Calibration

Product Detail

New items

20100, Testec

Accessory kit for sensing heads Contents Earth lead 22 cm, clamp hook (plug-in), probe tip, insulation cover, IC insulation cover, BNC adapter, trimming tool Passive Oscilloscope Probes Note All the products in this range are supplied for use with instruments with a permanent earth connection.

Product Detail

New Items

045, Red Pitaya

TA090, Pico Technology

20030-2, Testec

237-BNC-TRX, Tektronix

PQ218, Pico Technology

RT-ZA21, Rohde & Schwarz

RT-ZA22, Rohde & Schwarz

P01102154Z, Chauvin Arnoux

AS400, Fluke

L210, Fluke

TCPA300, Tektronix

20100, Testec

FAQs