Discounted Products

Ferrogard 1, 2, 20 & 21 Non Contact Safety Switch The Ferrogard FRS 1, 2, 20 and 21 are magnetically actuated non-contact safety switches which offer reliability and a high tolerance to misalignment. Designed to be installed on a guard door, the action of the magnetic actuator being removed from the switch opens the N.C. safety contacts therefore isolating the control power to the machines primary control element. Made from moulded ABS with a rectangular housing and sealed to IP67 (NEMA 6P), these non-contact switches are ideal for wet environments. Non-contact actuation High tolerance to misalignment Plastic rectangular housing Cable or quick-disconnect (QD) connections M4 mountable in any position Operating distance for safety contacts - make;12mm, break;23mm Operating temperature range: -10°C to +65°C Sealed to IP67 Cat. 1 device per EN 954-1 dual channel interlocks suitable for Cat. 3 or 4 systems Approvals CE Marked for all applicable directives and cULus. Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1.

The Iko Nippon Thompson 8x17x20mm precision linear slide unit. It is small and simple limited stroke type structure and retainer with two-row four-point contact structure and stable accuracy. In this rigidity can be achieved even in application where fluctuating load and complex load are applied. Simple limited linear motion guide structure Smooth operation High accuracy Stainless steel selection for excellent corrosion resistance

A2 Stainless Steel A2 Stainless Steel Metric Size Wide Flange Washers

Solenoid Operated Directional Spool Valves, CETOP 3, Size 6 6X Series direct operating, spring return and detent directional control spool valves. Solenoid operated by a 24Vdc or 110Vac power supply Porting Pattern to CETOP 3 size 6 for subplate mounting Wet pin dc or ac removable solenoids can be rotated through 90° to facilitate installation Connections to DIN 24 340 Form A6 ISO 4401-AB-03-4-A Emergency hand operation Seal kit available separately Coils can be replaced without releasing any fluid Replacement solenoid coils 24Vdc and 110Vac are available separately Note Take care to prevent pressure intensification in single rod cylinders. Directional Control Valves – Solenoid Actuated A range of CETOP standard valves used to control the starting, stopping and direction of a flow of hydraulic fluid. All valves work with mineral oils (HL, HLP) to DIN51 524 with a working fluid temperature range of -30°C to +80°C. Some valves are available with a detent feature which holds the valve in the selected control position. Must be fitted using CETOP subplate mountings (see range in this section) DIN 43650 plug connectors are sold separately and can be found in the Connectors section

33UF 450V 18X18X21

RELAY GEN PURPOSE DPDT 10A 120V

RELAY TIME DELAY 300HR 5A 250V

RELAY GEN PURPOSE 3PDT 10A 24V

HV Vacuum Encapsulated D Series These high voltage PCB and panel mount reed relays have high isolation voltages of up to 15kV. Applications include test equipment and high voltage power supplies. All models are highly reliable and are of extremely good quality. High power switching Through hole PCB & panel mount or flying lead versions 15kV high isolation versions available Tungsten contacts enable high voltage switching

CONN PLUG HSNG MALE 31POS INLINE

BOX ABS BLUE 4.72"L X 3.16"W

RF ANT, GPS/GLONASS (ACTIVE), U.

CONN TERM BLK FEED THRU 12-30AWG

Optime III Ear Defenders The modern and stylish 3M™ Peltor™ Optime™ III ear defenders have been developed specifically for use in extremely high noise working environments. Featuring a special double cup design to help minimise resonance effects, these Optime ear muffs offer an excellent level of high frequency attenuation, particularly for sound dominated by low frequencies, typical in special applications where extreme levels of noise are encountered. Typical Applications Power stations Mining operations Airports Engine rooms Printing Cement manufacture Industrial operations These Peltor Optime III passive ear defenders are CE approved to EN 352-1:1993 and offer an SNR (single number rating) of 35 decibels (dB) for protection against extremely high levels of noise. Features & Benefits Exceptional value ear defenders maintaining safety in extremely noisy environments Special low-profile headband design maintains constant pressure to maximise secure hearing protection Resonance effect minimised due to double-casing technology Increased space inside cup reduces moisture and heat build-up for added comfort Ear cushions are soft and wide reducing pressure around the ears for improved wearability Easy to replace hygiene kit sold separately Note THE NEW 3M PELTOR PROTAC 3 SPEAK AND LISTEN COMMUNICATION EAR DEFENDERS ARE AVAILABLE SEE STOCK NUMBERS 123-8886, 123-8887, 123-8888, 123-8889

AT Series Current Sensors Current sensors for electronic measurement of alternating currents with galvanic insulation between the primary and secondary circuits. Output 0 → 5 V; 0 → 10 V or output 4 → 20 mA, RMS value. Accept cables of up to 16 mm. Standards EN 61010-1 Approvals EN 61010-1

Polyolefin Heat Shrink Tubing 3:1 (Reels) Reels of tough, flexible, general purpose polyolefin tubing with good resistance to common fluids and solvents and a high dielectric strength. The ideal 3:1 shrink ratio along with electrical and physical properties make it suitable for a range of applications including mechanical protection, electrical insulation, strain relief, bundling, identification of wires, cables, pipes and electronic components. Features and benefits • Shrink ratio of 3:1 • Excellent physical and electrical performance • Very good chemical and solvent resistance Approvals UL224 135°C File E337635, CSA File LR51368-2, CSA 400-1-9 Approvals UL224 125 C File E35586; CSA File LR51368-2; CSA 400-1-9

Assortment of 5 x 20 Fuses Assortment of 360 5 x 20 fuses. Fast, time-delay or semi-timed action. 18 compartments of 20 fuses Values: 100 mA; 125 mA; 160 mA; 200 mA; 250 mA; 315 mA; 400 mA, 500 mA; 630 mA; 800 mA; 1 A; 1.25 A; 1.6 A; 2 A; 2.5 A; 3.15 A; 4A; 6.3 A.

Allen-Bradley Sipha S2 Non-contact Safety Switch The Sipha S2 is a non-contact switch in a slim ABS housing with moulded-in brackets, making it extremely versatile and simple to install. It incorporates several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. It is designed to operate with its own actuator to help prevent the switch being defeated by a simple magnet. The Sipha S1 must be connected to the Sipha control unit to provide a monitored circuit. Coding meets the requirements of more complex applications where simple magnetically actuated switching may not be sufficient Head & actuator are IP67 rated, which is ideal for steam cleaning or high pressure hosing down Non-contact actuation Magnetic coded sensing Slim moulded ABS housing, 82x19x19mm Must be operated with its own safety control unit Approvals UL, CSA. Standards EN1088, EN292, EN60204-1. Supplied with Stock nos. 334-0777 & 335-5763 have a 3m cable attached, stock no. 873-2219 has a 10m cable attached.

Vertical Fully interlocked switched (phase) sockets give enhanced electrical safety. Switch cannot be energised until the plug is inserted Plug cannot be withdrawn with the switch in the ON position, which prolongs contact life 16A - 63A can be padlocked in the OFF position Housings are moulded from thermoplastic materials, giving insulation, strength and durability properties Continuous polyurethane gasket between lid and base Neutral block must be removed first before fitting auxillary contact block * Has metric threads on mounting box cable entries Main Contact 16A 32A 63A 125A Rating Voltage (U I ) 660V a.c 660V a.c 660V a.c 660V a.c Current Rating (I th ) 25A 40A 80A 180A AC-3 rating (kW) @ 415V 7.5 18.5 30 75

Dual Thyristor Modules, SKKT SEMIPACK 1 Series, Semikron Dual series thyristorsApprovals UL recognised componentThyristors - Semikron A Thyristor is a solid-state semiconductor device with four layers of alternating N and P-type material. They act as bistable switches, conducting when their gate receives a current trigger, and continue to conduct while they are forward biased. Thyristors are synonymous to Silicon-Controlled Rectifier (SCR).Encapsulated modules with electrically isolated base plate. Suitable for applications such as battery chargers, welders and plating equipment, regulated power supplies and temperature and speed control circuits.

This Official Raspberry Pi power supply is the perfect choice for powering your new Raspberry Pi 4 Model B board. This PSU works with all variants of the Raspberry Pi 4 board, the 1GB, 2GB and 4GB. It is a 5.1V, 3A power supply featuring a USB-C connector at one end, and a plug socket at the other. Simply plug the USB-C into your Pi 4 and plug the socket into the mains and you’re ready to go! • Compatible with Raspberry Pi 4 Model B • Black (also available in white) • USB-C connector • EU Plug Versions Available: 187-3421 - EU Plug White (bulk) 187-3413 - EU Plug White (single) 187-3425 - EU Plug Black (bulk) 187-3417 - EU Plug Black (single) Raspberry Pi Power Supplies (PSU)

Tubular - White-Lux Plus® for SON/HPS Ballasts White-Lux Plus® metal halide lamps can be used to convert the yellow light of sodium lamps in existing SON ballasted installations to clean white metal halide light. Operate on standard HPS ballasts and ignitors Formed body arc tube for fast starting Open and Enclosed versions available - please see "Fitting Type" Metal Halide These lamps produce a clear white light and are suitable for display or floodlighting, where the heat output from tungsten halogen lamps would create a problem. Metal Halide Lamps have an efficiency approx. 4 times higher than halogen lamps and xenon lamps. In addition, the short-arc type is similar to a point light source, making optical design easy. As their colour temperature characteristics are similar to daylight colour, exact colours (RGB) can be reproduced. They can also be used for both high bay and low bay applications.,Compared to High Pressure Mercury lamps, Metal Halide lamps offer greater efficiencies and, compared to high pressure sodium (SON) lamps, they have similar advantages, but have different output characteristics. A disadvantage of metal halide lamps, when compared to SON lamps, is that they have a shorter service life.