Heat Shrink Boots

New items

222A 132-3-0, TE Connectivity

Lipless - 202A1 Series Lipless heatshrink boot allows direct mounting to the back of the connector Manufactured from fluid resistant elastomer Temperature Rating (°C) -75 to +150

Product Detail

New items

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Product Detail

New items

416-14047 1614-1-B5W2-PO-X-BK, HellermannTyton

Shrink-Fit End Caps Heat-sealable end cap with thermoplastic internal adhesive High mechanical protection Suitable for outdoor use, particularly for routing cable through soil

Product Detail

New items

43473, Amphenol Socapex

Sealing sleeves SL 61 Splashproof sealing sleeves for plugs. For use with straight or angled standard connectors (sleeve fitted inside). Amphenol - SL 61 Series Circular Connectors This family of connectors is widely used in industrial and electronic applications. This series includes: sockets fitted with male or female contacts, plugs with a choice of straight or angled connectors and accessories (blanking plugs, sealing sleeves). Available in four enclosure sizes, four types of contacts including currents ranging from 7.5 to 50 Amperes, and different contact arrangements. Connected using screws, with positioning and guiding pin.

Product Detail

New items

43458, Amphenol Socapex

Sealing sleeves SL 61 Splashproof sealing sleeves for plugs. For use with straight or angled standard connectors (sleeve fitted inside). Amphenol - SL 61 Series Circular Connectors This family of connectors is widely used in industrial and electronic applications. This series includes: sockets fitted with male or female contacts, plugs with a choice of straight or angled connectors and accessories (blanking plugs, sealing sleeves). Available in four enclosure sizes, four types of contacts including currents ranging from 7.5 to 50 Amperes, and different contact arrangements. Connected using screws, with positioning and guiding pin.

Product Detail

New items

202K132-25-0, TE Connectivity

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Product Detail

New items

202A174-3-0, TE Connectivity

Lipless - 202A1 Series Lipless heatshrink boot allows direct mounting to the back of the connector Manufactured from fluid resistant elastomer Temperature Rating (°C) -75 to +150

Product Detail

New items

202K163-100/86-0, TE Connectivity

Zero Halogen (Lipped) - 202K1 and 222K1 Series Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting. Features and benefits Low smoke Low emission properties Excellent sealing and strain relief Dielectric strength: 15MV/m Dimensions (mm) Size Straight Right angled A A1 B B1 P R C C1 D D1 P R 1 24 10.4 14 5.6 38 21 24 10.4 14 5.6 25 25 2 30 14.2 15 5.9 55 32 30 14.2 15 5.9 32 27 3 31 18 18 7.1 67 35 31 18 18 7.1 39 31 4 36 22.4 21 8.4 80 42 36 22.4 21 8.4 46 38 5 43 28.2 25 9.9 99 61 43 28.2 25 9.9 55 45 6 52 35.1 39 15.7 130 72 52 35.1 39 15.7 80 54 Note If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots Standards DEF STAN 59/97 issue 3 Type DF

Product Detail

New items

804530, 3M

EC series cold shrink end caps Cold shrink end caps are moulded in black EPR, are UV-resistant and are pre-expanded on an applicator ring for easy application on-site or in storage areas, without the need for grease, tools or a torch; they ensure a reliable seal. They provide excellent resistance to various chemical and atmospheric agents (ultraviolet light, ozone) as well as to abrasion and deformation. Used to block moisture penetration in all types of cables waiting to be connected or used in trenches, along roads or on cable drums or sheath ends. Mechanical protection of cable ends.

Product Detail

New items

202K232-100/180-0, TE Connectivity

Zero Halogen (Lipped) - 202K1 and 222K1 Series Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting. Features and benefits Low smoke Low emission properties Excellent sealing and strain relief Dielectric strength: 15MV/m Dimensions (mm) Size Straight Right angled A A1 B B1 P R C C1 D D1 P R 1 24 10.4 14 5.6 38 21 24 10.4 14 5.6 25 25 2 30 14.2 15 5.9 55 32 30 14.2 15 5.9 32 27 3 31 18 18 7.1 67 35 31 18 18 7.1 39 31 4 36 22.4 21 8.4 80 42 36 22.4 21 8.4 46 38 5 43 28.2 25 9.9 99 61 43 28.2 25 9.9 55 45 6 52 35.1 39 15.7 130 72 52 35.1 39 15.7 80 54 Note If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots Standards DEF STAN 59/97 issue 3 Type DF

Product Detail

New items

202K132-100/180-0, TE Connectivity

Zero Halogen (Lipped) - 202K1 and 222K1 Series Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting. Features and benefits Low smoke Low emission properties Excellent sealing and strain relief Dielectric strength: 15MV/m Dimensions (mm) Size Straight Right angled A A1 B B1 P R C C1 D D1 P R 1 24 10.4 14 5.6 38 21 24 10.4 14 5.6 25 25 2 30 14.2 15 5.9 55 32 30 14.2 15 5.9 32 27 3 31 18 18 7.1 67 35 31 18 18 7.1 39 31 4 36 22.4 21 8.4 80 42 36 22.4 21 8.4 46 38 5 43 28.2 25 9.9 99 61 43 28.2 25 9.9 55 45 6 52 35.1 39 15.7 130 72 52 35.1 39 15.7 80 54 Note If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots Standards DEF STAN 59/97 issue 3 Type DF

Product Detail

New items

317-1397-000, ITT Cannon

Sureseal Cable Boots Seals wired cable jackets to the connector housing Provides abrasion resistance Dimensions (mm) A B C Outer cable Stock no. 16.51 9.65 52.07 5.28 → 5.79 167-9540 15.49 9.65 52.07 5.59 → 6.10 167-9556 19.05 12.7 52.07 8.76 → 9.65 167-9562 Note Contacts must be ordered separately Plug & receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Tin-lead plated copper alloy Current rating 16A per contact Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Dielectric withstanding voltage 1200Vac at sea level Operating temperature -40°C to +105°C Sealing IP67 acc. to DIN 40050 Durability 50 cycles mating & unmating Salt spray MIL-STD-202D Method 101 D Humidity 95% at 95°C for 1000 hours Industrial gas Equivalent to MIL-C-23216 Technical specification Plug and receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Copper alloy, tin lead plate Current 8A Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Operating temperature -40°C to +105°C Environmental sealing IP67 (DIN 40050) Durability 50 cycles Salt spray MIL-STD-202D, method 101D Humidity 95% at 95°C/1000 hours Industrial gas MIL-C-23216

Product Detail

New Items

222A 132-3-0, TE Connectivity

222K174-25-0, TE Connectivity

416-14047 1614-1-B5W2-PO-X-BK, HellermannTyton

43473, Amphenol Socapex

43458, Amphenol Socapex

202K132-25-0, TE Connectivity

202A174-3-0, TE Connectivity

202K163-100/86-0, TE Connectivity

804530, 3M

202K232-100/180-0, TE Connectivity

202K132-100/180-0, TE Connectivity

317-1397-000, ITT Cannon

FAQs