Heat Shrink Boots

New items

202K232-100/180-0, TE Connectivity

Zero Halogen (Lipped) - 202K1 and 222K1 Series Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting. Features and benefits Low smoke Low emission properties Excellent sealing and strain relief Dielectric strength: 15MV/m Dimensions (mm) Size Straight Right angled A A1 B B1 P R C C1 D D1 P R 1 24 10.4 14 5.6 38 21 24 10.4 14 5.6 25 25 2 30 14.2 15 5.9 55 32 30 14.2 15 5.9 32 27 3 31 18 18 7.1 67 35 31 18 18 7.1 39 31 4 36 22.4 21 8.4 80 42 36 22.4 21 8.4 46 38 5 43 28.2 25 9.9 99 61 43 28.2 25 9.9 55 45 6 52 35.1 39 15.7 130 72 52 35.1 39 15.7 80 54 Note If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots Standards DEF STAN 59/97 issue 3 Type DF

Product Detail

New items

202A174-3-0, TE Connectivity

Lipless - 202A1 Series Lipless heatshrink boot allows direct mounting to the back of the connector Manufactured from fluid resistant elastomer Temperature Rating (°C) -75 to +150

Product Detail

New items

202K111-25/225-CS-2065-0, TE Connectivity

Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).

Product Detail

New items

202K132-100/180-0, TE Connectivity

Zero Halogen (Lipped) - 202K1 and 222K1 Series Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting. Features and benefits Low smoke Low emission properties Excellent sealing and strain relief Dielectric strength: 15MV/m Dimensions (mm) Size Straight Right angled A A1 B B1 P R C C1 D D1 P R 1 24 10.4 14 5.6 38 21 24 10.4 14 5.6 25 25 2 30 14.2 15 5.9 55 32 30 14.2 15 5.9 32 27 3 31 18 18 7.1 67 35 31 18 18 7.1 39 31 4 36 22.4 21 8.4 80 42 36 22.4 21 8.4 46 38 5 43 28.2 25 9.9 99 61 43 28.2 25 9.9 55 45 6 52 35.1 39 15.7 130 72 52 35.1 39 15.7 80 54 Note If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots Standards DEF STAN 59/97 issue 3 Type DF

Product Detail

New items

202K153-25/225-CS-2065-0, TE Connectivity

Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).

Product Detail

New items

222A 132-3-0, TE Connectivity

Lipless - 202A1 Series Lipless heatshrink boot allows direct mounting to the back of the connector Manufactured from fluid resistant elastomer Temperature Rating (°C) -75 to +150

Product Detail

New items

322A134-25-0, TE Connectivity

45° and 90° Side Breakout T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. Features and Benefits Provides strain relief, protection and mechanical support Shrink Ratio 2:1 Flame retardant

Product Detail

New items

804530, 3M

EC series cold shrink end caps Cold shrink end caps are moulded in black EPR, are UV-resistant and are pre-expanded on an applicator ring for easy application on-site or in storage areas, without the need for grease, tools or a torch; they ensure a reliable seal. They provide excellent resistance to various chemical and atmospheric agents (ultraviolet light, ozone) as well as to abrasion and deformation. Used to block moisture penetration in all types of cables waiting to be connected or used in trenches, along roads or on cable drums or sheath ends. Mechanical protection of cable ends.

Product Detail

New items

DT12P-BT-BK, Deutsch

DT Series Connector Protective Boots From Deutsch, the DT Series connector boots offer increased environmental protection of the connector system, protecting against water splashing and dust ingress and also providing a degree of impact protection. Deutsch DT Series Connectors Deutsch DT series connectors are ideally suited for applications that require a secure reliable connector in harsh environments such as under-the-hood, transmission tunnels and many others areas that require secure connections in both power and signal.

Product Detail

New items

317-1397-000, ITT Cannon

Sureseal Cable Boots Seals wired cable jackets to the connector housing Provides abrasion resistance Dimensions (mm) A B C Outer cable Stock no. 16.51 9.65 52.07 5.28 → 5.79 167-9540 15.49 9.65 52.07 5.59 → 6.10 167-9556 19.05 12.7 52.07 8.76 → 9.65 167-9562 Note Contacts must be ordered separately Plug & receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Tin-lead plated copper alloy Current rating 16A per contact Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Dielectric withstanding voltage 1200Vac at sea level Operating temperature -40°C to +105°C Sealing IP67 acc. to DIN 40050 Durability 50 cycles mating & unmating Salt spray MIL-STD-202D Method 101 D Humidity 95% at 95°C for 1000 hours Industrial gas Equivalent to MIL-C-23216 Technical specification Plug and receptacle material Perbunan or Nitrile-Butadiene rubber Contact material Copper alloy, tin lead plate Current 8A Contact resistance 10mΩ max. Insulation resistance 100MΩ min. Operating temperature -40°C to +105°C Environmental sealing IP67 (DIN 40050) Durability 50 cycles Salt spray MIL-STD-202D, method 101D Humidity 95% at 95°C/1000 hours Industrial gas MIL-C-23216

Product Detail

New items

202K132-25-0, TE Connectivity

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Product Detail

New items

222K174-25-0, TE Connectivity

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Product Detail

New Items

202K232-100/180-0, TE Connectivity

202A174-3-0, TE Connectivity

202K111-25/225-CS-2065-0, TE Connectivity

202K132-100/180-0, TE Connectivity

202K153-25/225-CS-2065-0, TE Connectivity

222A 132-3-0, TE Connectivity

322A134-25-0, TE Connectivity

804530, 3M

DT12P-BT-BK, Deutsch

317-1397-000, ITT Cannon

202K132-25-0, TE Connectivity

222K174-25-0, TE Connectivity

FAQs