Heat Shrink Boots

New items

222A 132-3-0, TE Connectivity

Lipless - 202A1 Series Lipless heatshrink boot allows direct mounting to the back of the connector Manufactured from fluid resistant elastomer Temperature Rating (°C) -75 to +150

Product Detail

New items

202A174-3-0, TE Connectivity

Lipless - 202A1 Series Lipless heatshrink boot allows direct mounting to the back of the connector Manufactured from fluid resistant elastomer Temperature Rating (°C) -75 to +150

Product Detail

New items

202K163-100/86-0, TE Connectivity

Zero Halogen (Lipped) - 202K1 and 222K1 Series Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting. Features and benefits Low smoke Low emission properties Excellent sealing and strain relief Dielectric strength: 15MV/m Dimensions (mm) Size Straight Right angled A A1 B B1 P R C C1 D D1 P R 1 24 10.4 14 5.6 38 21 24 10.4 14 5.6 25 25 2 30 14.2 15 5.9 55 32 30 14.2 15 5.9 32 27 3 31 18 18 7.1 67 35 31 18 18 7.1 39 31 4 36 22.4 21 8.4 80 42 36 22.4 21 8.4 46 38 5 43 28.2 25 9.9 99 61 43 28.2 25 9.9 55 45 6 52 35.1 39 15.7 130 72 52 35.1 39 15.7 80 54 Note If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots Standards DEF STAN 59/97 issue 3 Type DF

Product Detail

New items

43458, Amphenol Socapex

Sealing sleeves SL 61 Splashproof sealing sleeves for plugs. For use with straight or angled standard connectors (sleeve fitted inside). Amphenol - SL 61 Series Circular Connectors This family of connectors is widely used in industrial and electronic applications. This series includes: sockets fitted with male or female contacts, plugs with a choice of straight or angled connectors and accessories (blanking plugs, sealing sleeves). Available in four enclosure sizes, four types of contacts including currents ranging from 7.5 to 50 Amperes, and different contact arrangements. Connected using screws, with positioning and guiding pin.

Product Detail

New items

43473, Amphenol Socapex

Sealing sleeves SL 61 Splashproof sealing sleeves for plugs. For use with straight or angled standard connectors (sleeve fitted inside). Amphenol - SL 61 Series Circular Connectors This family of connectors is widely used in industrial and electronic applications. This series includes: sockets fitted with male or female contacts, plugs with a choice of straight or angled connectors and accessories (blanking plugs, sealing sleeves). Available in four enclosure sizes, four types of contacts including currents ranging from 7.5 to 50 Amperes, and different contact arrangements. Connected using screws, with positioning and guiding pin.

Product Detail

New items

322A134-25-0, TE Connectivity

45° and 90° Side Breakout T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. Features and Benefits Provides strain relief, protection and mechanical support Shrink Ratio 2:1 Flame retardant

Product Detail

New items

222K174-25-0, TE Connectivity

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Product Detail

New items

202K132-25-0, TE Connectivity

General Purpose (Lipped) - 202K1 and 222K1 Series Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

Product Detail

New items

202K153-25/225-CS-2065-0, TE Connectivity

Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).

Product Detail

New items

202K111-25/225-CS-2065-0, TE Connectivity

Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).

Product Detail

New items

411-52023 1152-4-GW24-PO-X-BK, HellermannTyton

HellermannTyton Right Angled Cable Boot These right angled heat shrink boots provide strain relief for harness systems and cable terminations. Features and benefits Provides strain relief for connector cable Manufactured from cross-linked polyolefin Can be used with a range of cable sizes Combine with hot melt adhesive for easy re-entry for repair Standards VG 95343 part 6 & part 18, DEF 59-97, BSG198 part 5

Product Detail

New items

401-57030 157-43-GW24-PO-X-BK, HellermannTyton

HellermannTyton 150 Series Straight Cable Boot Heat shrink straight cable boot that can be used in conjunction with a circular grooved adaptor. This provides strain relief and environmental sealing. Standards VG 95343 part 6 & part 18, DEF 59-97, BSG198 part 5

Product Detail

New Items

222A 132-3-0, TE Connectivity

202A174-3-0, TE Connectivity

202K163-100/86-0, TE Connectivity

43458, Amphenol Socapex

43473, Amphenol Socapex

322A134-25-0, TE Connectivity

222K174-25-0, TE Connectivity

202K132-25-0, TE Connectivity

202K153-25/225-CS-2065-0, TE Connectivity

202K111-25/225-CS-2065-0, TE Connectivity

411-52023 1152-4-GW24-PO-X-BK, HellermannTyton

401-57030 157-43-GW24-PO-X-BK, HellermannTyton

FAQs