Heat Shrink Boots

New items

222A 132-3-0, TE Connectivity

Lipless - 202A1 Series Lipless heatshrink boot allows direct mounting to the back of the connector Manufactured from fluid resistant elastomer Temperature Rating (°C) -75 to +150

Product Detail

New items

410-37001 1037-4-G-PO-X-BK, HellermannTyton

HellermannTyton Straight Cable Boot These straight heat shrink cable boots provide strain relief and environmental sealing when combined with a complimentary sealant. Standards VG 95343 part 6 & part 18, DEF 59-97, BSG198 part 5

Product Detail

New items

411-08480 1108-4-G-PO-X-BK, HellermannTyton

HellermannTyton Right Angled Cable Boot These right angled heat shrink boots provide strain relief for harness systems and cable terminations. Features and benefits Provides strain relief for connector cable Manufactured from cross-linked polyolefin Can be used with a range of cable sizes Combine with hot melt adhesive for easy re-entry for repair Standards VG 95343 part 6 & part 18, DEF 59-97, BSG198 part 5

Product Detail

New items

401-57030 157-43-GW24-PO-X-BK, HellermannTyton

HellermannTyton 150 Series Straight Cable Boot Heat shrink straight cable boot that can be used in conjunction with a circular grooved adaptor. This provides strain relief and environmental sealing. Standards VG 95343 part 6 & part 18, DEF 59-97, BSG198 part 5

Product Detail

New items

411-52023 1152-4-GW24-PO-X-BK, HellermannTyton

HellermannTyton Right Angled Cable Boot These right angled heat shrink boots provide strain relief for harness systems and cable terminations. Features and benefits Provides strain relief for connector cable Manufactured from cross-linked polyolefin Can be used with a range of cable sizes Combine with hot melt adhesive for easy re-entry for repair Standards VG 95343 part 6 & part 18, DEF 59-97, BSG198 part 5

Product Detail

New items

ES-CAP-NO.3-B8-0-40MM-RS, TE Connectivity

End Caps 4:1 Specially designed to provide mechanical and environmental protection of stubs and splices in electrical harnesses and also ideal for sealing off cable ends. Clear cap allows see through inspection, black caps are flame retardant. Thick adhesive-lining forms an effective barrier against fluids & moisture 4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters Mechanically tough jacket provides strain relief and abrasion protection Range; -40°C to +105°C. min recovery 100°C 100 per bag. Dimensions (mm) Stock No. Length as supp. Inside Diameter Wall Thickness Expanded as supplied Recovered after heating Recovered wall after heating 316-0880 30 5.72 1.27 0.64 316-0903 30 7.44 1.65 0.76 316-0925 40 10.85 2.41 0.89 316-0896 30 5.72 1.27 0.64 316-0931 30 7.44 1.65 0.76 316-0919 40 10.85 2.41 0.89 Approvals UL recognised component Approvals UL Listed (E85381)

Product Detail

New items

202K153-25/225-CS-2065-0, TE Connectivity

Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).

Product Detail

New items

202K111-25/225-CS-2065-0, TE Connectivity

Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).

Product Detail

New items

202S142-25C-0, TE Connectivity

TE Connectivity (TE) now offers the Rayaten family of high performance, rugged, versatile, heat-shrinkable molded parts, that offer lightweight screening capability of 70 db of attenuation up to 1 Ghz. When looking for high reliability, excellent strain relief and enhanced EMI performance, in a small, rugged, environmentally sealed product, you can count on the Rayaten family of molded parts. Fits most circular connectors and backshells Approximately 2:1 shrink ratio Straight, right-angled, and transitional shapes available D Subminiature options for rectangular connector backshells Abrasion resistant Resists most common military fuels, oils, and greases 70 dB of attenuation up to 1 Ghz EMI continuity from harness braid through the backshell New and improved coating Coatings can be custom designed

Product Detail

New items

DRC40-BT, Deutsch

Deutsch DRC Series Connector Boots A series of protective boots suitable for use with the DRC series of connector. Deutsch DRC Series Heavy Duty Connectors Deutsch DRC Series is a fully enviromentally sealed high density connector family, ideally suited for use within engine control systems, traction controls, ABS systems and electronic panels.

Product Detail

New items

DT12P-BT-BK, Deutsch

DT Series Connector Protective Boots From Deutsch, the DT Series connector boots offer increased environmental protection of the connector system, protecting against water splashing and dust ingress and also providing a degree of impact protection. Deutsch DT Series Connectors Deutsch DT series connectors are ideally suited for applications that require a secure reliable connector in harsh environments such as under-the-hood, transmission tunnels and many others areas that require secure connections in both power and signal.

Product Detail

New items

202K232-100/180-0, TE Connectivity

Zero Halogen (Lipped) - 202K1 and 222K1 Series Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by NES713 and high temperature index as defined by NES715. Approved to DEF STAN 59/97 iss.3 type DF. The boots can be used with spin coupling backshells or where ever the connector offers suitable rear mounting. Features and benefits Low smoke Low emission properties Excellent sealing and strain relief Dielectric strength: 15MV/m Dimensions (mm) Size Straight Right angled A A1 B B1 P R C C1 D D1 P R 1 24 10.4 14 5.6 38 21 24 10.4 14 5.6 25 25 2 30 14.2 15 5.9 55 32 30 14.2 15 5.9 32 27 3 31 18 18 7.1 67 35 31 18 18 7.1 39 31 4 36 22.4 21 8.4 80 42 36 22.4 21 8.4 46 38 5 43 28.2 25 9.9 99 61 43 28.2 25 9.9 55 45 6 52 35.1 39 15.7 130 72 52 35.1 39 15.7 80 54 Note If boots are used with sealant kit stock no. 239-1516, this kit does not meet the zero halogen properties of type - 100 boots Standards DEF STAN 59/97 issue 3 Type DF

Product Detail

New Items

222A 132-3-0, TE Connectivity

410-37001 1037-4-G-PO-X-BK, HellermannTyton

411-08480 1108-4-G-PO-X-BK, HellermannTyton

401-57030 157-43-GW24-PO-X-BK, HellermannTyton

411-52023 1152-4-GW24-PO-X-BK, HellermannTyton

ES-CAP-NO.3-B8-0-40MM-RS, TE Connectivity

202K153-25/225-CS-2065-0, TE Connectivity

202K111-25/225-CS-2065-0, TE Connectivity

202S142-25C-0, TE Connectivity

DRC40-BT, Deutsch

DT12P-BT-BK, Deutsch

202K232-100/180-0, TE Connectivity

FAQs