Discounted Products

Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand and left-hand use and with 9x12mm insert square for the insertion of insert tools. For 9x12 mm interchangeable insert tools Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 20-100 Nm: Precise to +/- 3% Very robust design with ergonomic 2-component handle suitable for right-hand use

TLS-GD2 Solenoid Interlock Switch, for Demanding Applications Features & Benefits Note The TLS-GD2 is a positive mode, tongue operated guard locking interlock switch that locks a machine guard closed until power is isolated and ensures that it remains isolated while the guard is open. The switch has three safety (N.C.) contacts and two auxiliary (N.O.) contacts. The head of this interlock switch has two entry slots and it can be rotated to provide four actuator entry points. A blanking plug is provided to seat the unused slot. The guard may only be opened when a signal is applied to the TLS-GD2 internal solenoid which releases the lock mechanism. Therefore this solenoid interlock switch is ideal for machines which do not stop immediately or where premature interruption of the machine could cause damage to tooling and components or cause an additional hazard. The safety switch is available in three types. The TLS-1 GD2 and TLS-3 GD2 incorporate a power-to-release function. Two manual release points with security screws allow the locked TLS-GD2 to be released in emergencies. An optional lid-mounted key-release style can also be supplied. The TLS-2 GD2 has a power-to-lock function. Each type of switch has five sets of contacts of various forms and are suitable for use with PLCs. The TLS-1 GD2 and TLS-3 GD2 are both available with escape release options. They are intended for machine guarding with full body access. The switch is installed so that the escape release push button on the rear side is accessible from inside the hazardous area. This allows the intentional unlocking of the TLS-GD2 from inside a hazardous area, providing a means of escape for a person who may become trapped. A stainless-steel actuator guide is fitted to protect the switch from actuator damage due to poor guard alignment or guard wear. TLS-GD2 has an ingress protection rating ...

PLUG, 3P LATCHED POKE-IN WTW CON

Panel Plugs & Sockets Male and female 4 way panel mount receptacles. Stock no. 351-443 offers the option to convert glanded switches into connector versions by simply screwing the PG13.5 threaded end of the receptacle into the appropriate proximity switch.

RELAY SOCKET 3PDT TRACK MT MK

RES 47 OHM 50W 5% TO220

BIT SET HEX PHIL SLOT TORX 13PC

Screw Cap Choice of release caps Nylon body and cap, UL94-VO rated Low insertion resistance Protection: PC2 Approvals UL Panel Mounting CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

160A, 320A, Connector housing with contacts and auxiliaries Mechanically keyed colour coded housings prevent accidental mating of equipment operating at different voltages Auxiliary contacts provide the ability to incorporate a secondary sensor control unit Genderless design Flat wiping contacts UL voltage rating 150 V Pair auxiliary contacts Silver plated contacts offer longevity when using high power Single piece housing Capable of 10000 connect / disconnect cycles

150-Part Tool Kit, Wave Profile 1/4"; 3/8"; 1/2" 150-part socket kit with wave profile and ball lock retainer, in three drive sizes Made of chrome vanadium steel Special profile grips the flanks instead of the edges of the screw heads Suitable for Imperial, metric, outer Torx® and also worn screw heads No sliding, even in difficult usage conditions Supplied in PE hard shell case Includes 1 x each ratchet handle 72 teeth with square drive: 1/4"; 3/8"; 1/2" 1 x each universal joint with square drive and output: 1/4"; 3/8"; 1/2" 1 x extension 1/4" x 100 mm 1 x square extension 1/2" x 250 mm and sliding adapter 1 x each square extension 1/4" x 50 mm; 3/8" x 125 mm; 1/2" x 125 mm 1 x sliding T-handle with 1/4" output 1 x each square adapter on hexagon 3/8" x 5/16", 1/2" x 5/16" 1 x screwdriver handle with 1/4" square drive and output 1 x angled hexagon: 1.3; 1.5; 2; 2.5; 3; 4; 5 mm Bit inserts 1 x each blade, square 1/4": 4; 5.5; 6.5; 7 mm, hexagon 5/16": 8; 10; 12 1 x each PHILLIPS®, square 1/4": PH0; PH1; PH2; hexagon 5/16": PH3; PH4 1 x each POZIDRIV®, square 1/4": PZ0; PZ1; PZ2; hexagon 5/16": PZ3; PZ4 1 x each TORX®, square 1/4": T8; T9; T10; T15; T20; T25; T27; T30 and hexagon 5/16": T40; T45; T50; T55; T60; T70 1 x each TORX-BO®, square 1/4": T8H; T9H; T10H; T15H; T20H; T25H; T27H; T30H; hexagon 5/16": T40H; T45H; T50H; T55H; T60H; T70H 1 x each Allen, 1/4" square: 3; 4; 5; 6; 5/16" hexagon: 7; 8; 10; 12; 14 mm Socket inserts 1 x each 1/4" short: 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm and long: 4; 5; 6; 7; 8; 9; 10 mm 1 x each 3/8" short: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm and long: 10; 11; 12; 13; 14; 15 mm 1 x each 1/2" short: 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 27; 30; 32 mm and long: 16; 17; 18; 19; 22 mm 1 x spark plug connector: 3/8" x 18; 1/2" x 16; 1/2" x 21 mm 1 x each E-Profile outer TORX®, 1/4" : E4; E5; E6; E7; E8; 3/8" : E10; E11; E12; E14; E16 and 1/...

IP66 Terminal Enclosure IP66 Simple wall mounting All-welded basic body High IP index achieved by all-round knife edges against which an expanded PU seal is pressed 2.6mm gauge steel wall brackets RAL 7032 1.4mm wall thickness Note Not supplied with flange, DIN rail or chassis plates Sorry Your request could not be completed at this time

TIMER SS MINI DPDT 5SECONDS

TIMER SS MINI 4PDT 10SECONDS

Grabber Clip Leadset Cat III 100V IV 600

PowerTOP Connectors Spring loaded covers protect contacts when not in use and latch on to mating plugs Easy to assemble as terminals are open to receive bare conductors which are accessible from one direction External cable clamp simplifies installation and provides support of cable preventing movement around seal Note For Plugs see example 236-0023 Mennekes PowerTOP Glanded Entry HQ Range – IP44 and IP67 Plugs, sockets, appliance inlets and interlocked sockets conforming to the latest requirements of British and European standards. The insulator outer casing and interiors are manufactured from Amaplast (nylon 6) 16/32A, Amelan 63 / 125A for excellent mechanical performance. This material provides good electrical insulation and will meet the requirements of most industrial environments. Contact tubes and pins are made of brass. To prevent incorrect connection, the earth contact is in a different position, relative to the safety key way on each socket outlet, for each voltage. All types are colour coded by voltage and are suitable for 50/60Hz operation. Products are type tested to VDE.

E2S Xenon Beacon - L101X This L101X by E2S is a compact and robust 5 Joule Xenon strobe beacon, which has been created and designed for a variety of signalling applications in different locations including fire, security and process control. The beacon is CPR compliant and approved for use in fire alarm signalling. Features and Benefits • The L101X features an automatically synchronised flash rate of 60 flashes per minute, with a user-selectable 90 flashes per minute and double-strike flash rate on DC voltage versions • With an ingress protection rating of IP66, the device is protected against dust and water • The back boxes are available with or without mounting lugs • The beacons can be stacked to provide a multi-signal unit and can be combined with both AlertAlarm and Senora audible signals • The Xenon tube lamp can be replaced by the user, with multiple selectable flash rates • Pluggable terminals • In and out terminals Applications Xenon beacons are an efficient signalling solution in a range of industrial applications. Available in a variety of colours, they can signal hazards, emergencies and more in environments such as: • Emergency exits • Warehouses and factories • Machinery • Walkways Approvals • CPD approval: 0786-CPD-21247 to EN54-23:2010. • VdS certificate: G211077 (24 & 48Vdc versions). • UL & cULs approved: General signalling use. • GOST-R certificate: POCC GB.JB05.H00144. E2S 2-13-010 Beacon

CONN TERM BLK FEED THRU 2-12 AWG

Masking tape - AT6150 Flexible polyethylene tape, easy to cut and unwind. For protective film assembly, protects frames when spray-coating or painting walls. Advance Tapes Masking Tape The Advance Tapes AT6150 masking tape is an orange polythene film, coated with a clear, aggressive, pressure-sensitive adhesive. This tape is 0.11mm thick, 50mm wide and 33m long. Features and Benefits Easy to cut and unwind Flexible at low temperature Easy tear Water resistant Good abrasion resistance Conformable Non-corrosive adhesive Good tack Breaking load is 15N/cm Elongation 200% Applications For protective film assembly Protects frames while spray-coating or painting walls Certifications ISO 9001

Tectonic Elements BMR® Drivers The Tectonic Elements range of BMR® drivers are unique full-range audio loudspeaker units. Exhibiting an extended frequency response and wider directivity when compared with typical conventional drive units. The benefits of Tectonic Elements bending-wave technology and pistonic mode of operation combine to produce an ideal solution for audio applications that requires a full-range, high performance compact acoustic solution. These compact drive units are available in various form factors. And are ideally suited for a wide range of markets including consumer electronics, professional audio, automotive and industrial. Features: Full range, extended frequency response Wide sound dispersion Advanced magnet motor systems Compact dimensions Square, circular, and rectangular form factors available Patented technology Some units available in 4 Ω or 8 Ω impedance Typical Applications: Table radios Sound bars Home Theatre & Hi-Fi TV speakers Portable speakers Wireless speakers

AS1803 Neutral Cure Thermally Conductive Silicone RTV These non-corrosive, 1-part, room temperature vulcanising (RTV) silicone rubbers are part of a new family of acetone cure sealants that are solvent free. They are suitable for a wide range of bonding and sealing applications particularly in the electronics industries. They exhibit excellent primerless adhesion to many substrates. The product is cured rapidly in contact with atmospheric moisture to a tough weather and moisture resistant rubber. They will not corrode copper or its alloys and exhibit excellent primerless adhesion when fully cured. Non corrosive Good spreading and tooling properties Fast skinning Good adhesion to most substrates No H&S issues 100% Solids Solvent Free Rheology Self Levelling Colour White Thermal Conductivity 1.55 W/mK Temperature Range -50 to +220°C Tack Free Time 4 mins 3mm Cure Silicone Compounds - ACC

Single Emergency Stop Pull-to-reset, designed to prevent accidental operation Lockable version is padlockable in the actuated position to prevent restart Approvals II 2 G EEx e d IIC T6 Bartec Hazardous Area Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer. Normally closed contacts are positive break Fitted with two terminals each side of contacts for loop-in applications Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c. Ingress protection to IP66/67 Reduced side walls to allow easy access to switch and lamp modules Units can be joined together to form pendants or larger control stations by using a coupler kit Terminals: 0.5 to 2.5mm 2 conductors Two earth terminals fitted as standard in each unit Cable entry M20 x 1.5mm (bottom face)

Low Smoke Halogen Free Single Core Cable - H07Z-K A flexible low smoke halogen free single core cable for internal wiring Intended for installation within conduits and trunking, as well as internal wiring within appliances and fittings Can be used in all areas where in an event of fire a protection of people and equipment is paramount Flame retardant in accordance to IEC 60332-1-2 Smoke density in accordance to IEC 61034 Halogen free in accordance to IEC 60754-1 Working voltage 450/750V Test Voltage 2500Vac Temperature range -15°C → +90°C

OPTI Durable Series The new DS-I Series UPS provides premium double-conversion back up power and scalable battery runtimes for IT and electrical engineering infrastructure in corporate, healthcare, banking and industrial applications. The entire DS-I Series provides value to customers with demandi ng power environments, including very wide input voltage window, extremely tight output voltage regulation, frequency regulati on, internal bypass, and input power factor correction. Which is perfectly serve their purpose in Servers and Workstation, applicances and small business users Zero transfer time Wide range of input frequency (40∼70HZ) and Output frequency 50/60HZ setting High-performance DSP processor, precision and fast data processing with high reliability Cold start (DC power on) Auto reboot functions Extended battery pack for long service life RS232 and USB port SNMP card slot available The UPS should be charged once every 4 to 6 months if it has not been used for a long time In the regions of hot climates, the battery should be charged and discharged every 2 months. The standard charging time should be at least 12 hours Battery replacement should be performed by qualified personnel Replace batteries with the same number and type of batteries Do not replace the battery individually. All batteries should be replaced at same time following the instructions of the battery supplier Battery maintenance: 1-3KVA UPS only requires minimal maintenance OPTI - On Line