Discounted Products

2011 - Multi Purpose Epoxy - Long Working Life Colour - Pale yellow Excellent Impact resistance Room temperature curing, high strength and toughness Versatile and excellent resistance to dynamic loading Ideal for large areas of bonding and/or a long working time Applications Ferrous and Non-Ferrous Metals; Polyamides; Polystyrene Foams, PU Foams; Ceramics; Wood

The Lovato product is a rotary cam changeover switch with 4 poles. It has front mounting with black handle. Suitable for circuit connection, changeover, switching ON and OFF as well as motor starting Square shaped contact body Possibility of side by side installation

Tectonic Elements BMR® Drivers The Tectonic Elements range of BMR® drivers are unique full-range audio loudspeaker units. Exhibiting an extended frequency response and wider directivity when compared with typical conventional drive units. The benefits of Tectonic Elements bending-wave technology and pistonic mode of operation combine to produce an ideal solution for audio applications that requires a full-range, high performance compact acoustic solution. These compact drive units are available in various form factors. And are ideally suited for a wide range of markets including consumer electronics, professional audio, automotive and industrial. Features: Full range, extended frequency response Wide sound dispersion Advanced magnet motor systems Compact dimensions Square, circular, and rectangular form factors available Patented technology Some units available in 4 Ω or 8 Ω impedance Typical Applications: Table radios Sound bars Home Theatre & Hi-Fi TV speakers Portable speakers Wireless speakers

AS1803 Neutral Cure Thermally Conductive Silicone RTV These non-corrosive, 1-part, room temperature vulcanising (RTV) silicone rubbers are part of a new family of acetone cure sealants that are solvent free. They are suitable for a wide range of bonding and sealing applications particularly in the electronics industries. They exhibit excellent primerless adhesion to many substrates. The product is cured rapidly in contact with atmospheric moisture to a tough weather and moisture resistant rubber. They will not corrode copper or its alloys and exhibit excellent primerless adhesion when fully cured. Non corrosive Good spreading and tooling properties Fast skinning Good adhesion to most substrates No H&S issues 100% Solids Solvent Free Rheology Self Levelling Colour White Thermal Conductivity 1.55 W/mK Temperature Range -50 to +220°C Tack Free Time 4 mins 3mm Cure Silicone Compounds - ACC

OPTI Durable Series The new DS-I Series UPS provides premium double-conversion back up power and scalable battery runtimes for IT and electrical engineering infrastructure in corporate, healthcare, banking and industrial applications. The entire DS-I Series provides value to customers with demandi ng power environments, including very wide input voltage window, extremely tight output voltage regulation, frequency regulati on, internal bypass, and input power factor correction. Which is perfectly serve their purpose in Servers and Workstation, applicances and small business users Zero transfer time Wide range of input frequency (40∼70HZ) and Output frequency 50/60HZ setting High-performance DSP processor, precision and fast data processing with high reliability Cold start (DC power on) Auto reboot functions Extended battery pack for long service life RS232 and USB port SNMP card slot available The UPS should be charged once every 4 to 6 months if it has not been used for a long time In the regions of hot climates, the battery should be charged and discharged every 2 months. The standard charging time should be at least 12 hours Battery replacement should be performed by qualified personnel Replace batteries with the same number and type of batteries Do not replace the battery individually. All batteries should be replaced at same time following the instructions of the battery supplier Battery maintenance: 1-3KVA UPS only requires minimal maintenance OPTI - On Line

Single Emergency Stop Pull-to-reset, designed to prevent accidental operation Lockable version is padlockable in the actuated position to prevent restart Approvals II 2 G EEx e d IIC T6 Bartec Hazardous Area Control stations for Zones 1 and 2 made from anti-static and impact-resistant polymer. Normally closed contacts are positive break Fitted with two terminals each side of contacts for loop-in applications Switching capacities: 250V a.c./16A (AC12); 230V a.c./10A (AC15); 24V d.c./1A (DC13) and 110V d.c./0.5A LED lamps (on stations with indicators) operate from 24 to 48V d.c. or 24 to 230V a.c. Ingress protection to IP66/67 Reduced side walls to allow easy access to switch and lamp modules Units can be joined together to form pendants or larger control stations by using a coupler kit Terminals: 0.5 to 2.5mm 2 conductors Two earth terminals fitted as standard in each unit Cable entry M20 x 1.5mm (bottom face)

E2S Xenon Beacon - L101X This L101X by E2S is a compact and robust 5 Joule Xenon strobe beacon, which has been created and designed for a variety of signalling applications in different locations including fire, security and process control. The beacon is CPR compliant and approved for use in fire alarm signalling. Features and Benefits • The L101X features an automatically synchronised flash rate of 60 flashes per minute, with a user-selectable 90 flashes per minute and double-strike flash rate on DC voltage versions • With an ingress protection rating of IP66, the device is protected against dust and water • The back boxes are available with or without mounting lugs • The beacons can be stacked to provide a multi-signal unit and can be combined with both AlertAlarm and Senora audible signals • The Xenon tube lamp can be replaced by the user, with multiple selectable flash rates • Pluggable terminals • In and out terminals Applications Xenon beacons are an efficient signalling solution in a range of industrial applications. Available in a variety of colours, they can signal hazards, emergencies and more in environments such as: • Emergency exits • Warehouses and factories • Machinery • Walkways Approvals • CPD approval: 0786-CPD-21247 to EN54-23:2010. • VdS certificate: G211077 (24 & 48Vdc versions). • UL & cULs approved: General signalling use. • GOST-R certificate: POCC GB.JB05.H00144. E2S 2-13-010 Beacon

CONN TERM BLK FEED THRU 2-12 AWG

100S-C, 3 Pole Safety Contactors 2N/O & 3N/C The Bulletin 100S-C safety contactors provide mechanically linked positively guided contacts, required in feedback circuits of modern safety applications. The mechanically linked N.C. auxiliary contacts will not change state when a power pole welds. In addition, the gold-plated bifurcated auxiliary contacts are ideally suited for low-energy applications or feedback control circuits with multiple series-connected N.C. auxiliary contacts. Redundant contactors to isolate motor (hazardous motion) Positively guided main contacts Red contact housings for easy identification as safety device Protective cover prevents manual operation - yet the window allows visible ON/OFF status Note DC versions incorporate a diode protection circuit Safety Contactor

Masking tape - AT6150 Flexible polyethylene tape, easy to cut and unwind. For protective film assembly, protects frames when spray-coating or painting walls. Advance Tapes Masking Tape The Advance Tapes AT6150 masking tape is an orange polythene film, coated with a clear, aggressive, pressure-sensitive adhesive. This tape is 0.11mm thick, 50mm wide and 33m long. Features and Benefits Easy to cut and unwind Flexible at low temperature Easy tear Water resistant Good abrasion resistance Conformable Non-corrosive adhesive Good tack Breaking load is 15N/cm Elongation 200% Applications For protective film assembly Protects frames while spray-coating or painting walls Certifications ISO 9001

Tray Inserts 47mm inserts suitable for Carrylite 55 mm case, compact toolboxes or plastic drawer cabinets. 69mm inserts suitable for 80mm deep Boxxter and carrylite 80mm case and deep multitray. The inserts sold in multiple quantities will fit a footprint of 320x220mm or 160x 220mm Mixed Inserts Comprise of - 4 x A9-1,2 x A9-2,2 x A8-1,2 x A8-2,2 x A8-3

EVO7 Series Cable Tie Tensioning Tools An ergonomic cable tie application tool, reducing the cutting effort.The EVO 7 cable tie tool has the ability to lock each tie in place at the desired tension prior to cutting. Because the tension is fixed at the trigger when squeezed, only a low amount of hand force and a shorter range of motion is required to cut through each tie with minimal kickback. Key Features • Tensions and cuts cable with ease • Simple blade replacement • Cut with no protrusions to damage neighboring components • Ergonomic design with secure and comfortable grip handle • Extended slim nose for use in narrow spaces • Easy to use trigger • Easily adjust tension settings • Plastic lightweight fibreglass reinforced housing • Standard grip span (90 mm) and short grip span (80 mm) available

SOCKET RELAY 8PIN 5A

Calibration/Substitution, Compact 6 Decade Resistance Box Compact, durable case manufactured from high impact polystyrene Metal film resistors and silver plated brass contact switches Particularly suitable for use in electrical and electronic industrial laboratories Required resistance selected by the 6 rotary switches An additional 1KΩ resistor is available at the terminals, enabling the user to make a simple divider

Tente Heavy Duty Plate Castor, Rubber Tyre These heavy-duty castors from Tente are made from heavy sheet steel, with a broad reinforced fork and two ball races. The wheel has an aluminium body and precision ball bearing, and is made from black vulcanised rubber for durability. These castors are available as swivel, braked and fixed, in various wheel sizes. Features and Benefits •Steel sheet •Broad reinforced fork •Two ball races •Swivel, braked and fixed castors •Aluminium wheel body •Elastic tyre, black vulcanised tread •Precision ball bearing •A range of wheel diameter sizes •Rectangular plate according to EN-R 42/43 •Shore A67 Rubber tyred wheels are available in a wide range of sizes, load capacities and colours with a choice of nylon, plastic, cast iron and pressed metal centres. Rubber tyred wheels are suitable for use on most floors.

Linear Solenoid, Single Hole Fixing Johnson Electric STA series linear tubular solenoids provide high force for short stroke applications and is ideal for applications that require long life and high reliability. The STA series are constructed with a low friction system bobbin which ensures life of 25 million actuations. High resistance to shock and vibration Continuously rated coils Long life (up to 25 million operations)

Acti9 Auxiliaries The electrical auxiliaries are combined with iC60 circuit breakers, iID residual current circuit breakers, remote tripping switch disconnector iSW-NA , RCA remote controls and ARA automatic reclosers; they enable tripping or remote indication of their position (open/closed/tripped) upon a fault Tripping auxiliaries: iMN: undervoltage release iMNs: delayed undervoltage release iMNx: undervoltage release, independant from supply voltage iMX: shunt release iMX+OF: shunt release with open/close contact. Indication auxiliaries: iOF: open/close contact iSD: fault indicating contact iOF/SD+OF: open/close contact and switchable OF or SD contact.

22 mm Push Button Heads, Plastic Siemens extremely rugged IP69K high-grade plastic push button heads. Avaliable in a variety of colours, illuminated, non-illuminated or mushroom style. Self-holding function of the actuator when mounting Twist prevention integrated into patented holder design Stackable contact modules Suitable for use in extreme environments No special tools required Simple geometry for mounting holes Latching or Momentary available Standards IEC 60947-1, EN 60947-1 IEC 60947-5-1, EN 60947-5-1 Siemens Sirius Act Range The SIRIUS ACT range of push buttons and signalling devices presents an expertly designed selection of push buttons, pilot lights and switches that are intelligent, reliable and physically robust. An innovative snap-on concept makes the task of installing a unit so effortless that it can be done with one hand. Made with real metals and high-grade plastics, installed with smart functions and interaction abilities, these state-of-the-art push buttons, indicator lights and switches have been extreme element tested to guarantee a long usage life and reliability for all your operations. One-handed installation without special tools Components can be snapped on without having to hold the other side Installation possible in a slanted position Modular concept Stylish design & high-quality materials Extremely Rugged & Reliable Flexible Communication - AS-I, IO Link and Profinet

The Sick clamping bracket is used for rods with a diameter of 12 mm. Made up of aluminium Note Product details cover the whole product family. For details on the specifications for this individual product, please refer to the datasheet.

CRYSTAL 44.5450MHZ 13PF SMD

T Series Standard Cable Ties Standard cable ties available in a wide range of sizes and colours making them suitable for many applications including routing, bundling and securing of cables, pipes and hoses Features and Benefits • Quick, simple fixing by hand or processing tool • Available in various materials, colours and sizes • Inside serration for a strong hold onto bundles • Operating temperature range: -40 to +85°C • Halogen free • Flame retardant (UL94 V2 rating) Standards US MIL 231-90; UL94