Universal coders with hollow axis, Ø 58, type GI333
The coder can be powered by a wide supply range of between 4.75 and 30 Vdc.
Universal output stage, compatible with Totem pole, NPN or PNP and RS422 or TTL line transmitter.
Resolution up to 5000 pulses / turn.
A, B, Top zero and complemented output signals.
Hollow axis coders for direct mounting onto the end of a motor shaft, bored hole Ø 12 mm H7.
Concentric tightening using ring, rotation locking using rod and stopper supplied with the coder.
Anti-rotation spring available as a option.
Connection via supplied radial connector.
Shielded cable connected to the connector available as an option.
Application: robotics, metal or wood working, paper, textiles, packaging machinery, etc.
Operating voltage:
4.75 → 30 Vdc
Consumption:
30 mA @ 24 Vdc.
Frequency: 300 kHz max.
Max. 300 kHz.
Rotation speed:
10,000 rpm max.
Moment of inertia:
1.45 x 10-6 kgm²
Vibrations: IEC68
16 → 2000 Hz ≤100 m/s²
Impact: IEC68
≥1000 m/s² (4 ms)
Universal output stage:
Totem pole, NPN or PNP compatible if the coder is
supplied at 10 → 30 Vdc, or Line transmitter compatible with
TTL or RS422 if the coder is supplied at 5 Vdc
High level ≥ U supply ‒ 2 V for I = 20 mA,
Low level ≤ 0.5 V for I = 20 mA
Operating temperature:
-25° → 100 °C
Relative humidity: 95%
95%
Protection index: IP64
IP 64
Dimensions (mm)
Ø 58, depth 51 mm
Weight:
250 g
Kubler
Push pull interface with inverted signals
Short circuit protection
Age and temperature compensation
